We cannot use the PREROUTING/POSTROUTING chains here because Suricata
will fail to track NAT-ed connections.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This graph is split into three parts. One shows bypassed packets, the
next one shows the actually scanned packets and lastly we show the total
throughput.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The PID file does not get written when Suricata is not being started in
daemon mode and therefore we need to pass it as a command line
parameter.
The initscript should not deal with the PID file when starting but needs
it to terminate the process and to check the process status.
The web UI can use the PID file again.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is because we might still land in the scenario where Suricata
crashes and NFQUEUE will simply ACCEPT all packets which will terminate
the processing of the mangle table.
Therefore the NFQUEUE rule should be the last one so that we never skip
any of the other processing.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This patch adds a watcher process that will restart suricata when it is
being killed by SIGKILL (e.g. by the OOM killer) or after a SEGV.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This patch changes that we introduce a new mark which allows us to
identify any newly bypassed connections and permanently store the bypass
flag.
We also only restore marks from the connection tracking when a packet
has no marks, yet.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This allows us to workaround better against any problems in Suricata
because we never send any whitelisted packets to the IPS in the first
place.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This should make the IPS more efficient, we should have fewer rules and
the IPS will now sit at the edge of the networking stack as it will see
packets immediately when they come and and just before they leave.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from vesion 8.9.1 to 8.10.0
- Update of rootfile
- In previous versions if libpsl was not found then the build excluded it. Now it needs
to be explicitly disabled otherwise the build will stop with a warning that it could
not be found.
- Changelog
8.10.0
changes:
o autotools: add `--enable-windows-unicode` option [103]
o curl: --help [option] displays documentation for given cmdline option [19]
o curl: add --skip-existing [54]
o curl: for -O, use "default" as filename when the URL has none [34]
o curl: make --rate accept "number of units" [4]
o curl: make --show-headers the same as --include [6]
o curl: support --dump-header % to direct to stderr [31]
o curl: support embedding a CA bundle and --dump-ca-embed [20]
o curl: support repeated use of the verbose option; -vv etc [35]
o curl: use libuv for parallel transfers with --test-event [82]
o getinfo: add CURLINFO_POSTTRANSFER_TIME_T [87]
o mbedtls: add CURLOPT_TLS13_CIPHERS support [78]
o rustls: add support for setting TLS version and ciphers [113]
o vtls: stop offering alpn http/1.1 for http2-prior-knowledge [53]
o wolfssl: add CURLOPT_TLS13_CIPHERS support [76]
o wolfssl: add support for ssl cert blob / ssl key blob options [50]
bugfixes:
o asyn-thread: stop using GetAddrInfoExW on Windows [241]
o autotools: fix MS-DOS builds [249]
o autotools: fix typo in tests/data target [30]
o aws_sigv4: fix canon order for headers with same prefix [74]
o bearssl: fix setting tls version [203]
o bearssl: improve shutdown handling [45]
o BINDINGS: add zig binding [100]
o build: add `iphlpapi` lib for libssh on Windows [166]
o build: add `poll()` detection for cross-builds [244]
o build: add options to disable SHA-512/256 hash algo [239]
o build: check OS-native IDN first, then libidn2 [223]
o build: delete unused `REQUIRE_LIB_DEPS` [226]
o build: drop unused `NROFF` reference [253]
o build: drop unused feature-detection code for Apple `poll()` [227]
o build: generate `buildinfo.txt` for test logs [256]
o build: improve compiler version detection portability
o build: make `CURL_FORMAT_CURL_OFF_T[U]` work with mingw-w64 <=7.0.0 [207]
o build: silence C4232 MSVC warnings in vcpkg ngtcp2 builds [137]
o build: use -Wno-format-overflow [195]
o buildconf.bat: fix tool_hugehelp.c generation [173]
o cf-socket: fix pollset for listening [179]
o cf-socket: prevent KEEPALIVE_FACTOR being set to 1000 for Windows [185]
o cfilters: send flush [13]
o CHANGES: rename to CHANGES.md, no longer generated [40]
o CI: enable parallel testing in CI builds [18]
o ci: Update actions/upload-artifact digest to 89ef406 [24]
o cmake: `Libs.private` improvements [215]
o cmake: add `CURL_USE_PKGCONFIG` option [138]
o cmake: add Linux CI job, fix pytest with cmake [71]
o cmake: add math library when using wolfssl and ngtcp2 [66]
o cmake: add missing `pkg-config` hints to Find modules [158]
o cmake: add missing version detection to Find modules [170]
o cmake: add rustls [116]
o cmake: add support for versioned symbols option [51]
o cmake: add wolfSSH support [117]
o cmake: allow `pkg-config` in more envs [147]
o cmake: cleanup header paths [59]
o cmake: default `CURL_DISABLE_LDAPS` to the value of `CURL_DISABLE_LDAP` [231]
o cmake: delete MSVC warning suppression for tests/server [101]
o cmake: detect `nghttp2` via `pkg-config`, enable by default [21]
o cmake: detect and show VCPKG in platform flags [84]
o cmake: distcheck for files in CMake subdir [9]
o cmake: drop custom `CMakeOutput.log`/`CMakeError.log` logs [27]
o cmake: drop libssh CONFIG-style detection [167]
o cmake: drop no-op `tests/data/CMakeLists.txt` [26]
o cmake: drop reference to undefined variable [25]
o cmake: drop unused `HAVE_IDNA_STRERROR` [62]
o cmake: drop unused internal variable [22]
o cmake: exclude tests/http/clients builds by default [110]
o cmake: fix `GSS_VERSION` for Heimdal found via pkg-config [77]
o cmake: fix `pkg-config`-based detection in `FindGSS.cmake` [94]
o cmake: fix and tidy up c-ares builds, enable in more CI jobs [156]
o cmake: fix find rustls [148]
o cmake: fixup linking libgsasl when detected via CMake-native
o cmake: honor custom `CMAKE_UNITY_BUILD_BATCH_SIZE` [163]
o cmake: limit `pkg-config` to UNIX and MSVC+vcpkg by default [188]
o cmake: limit libidn2 `pkg-config` detection to `UNIX` [109]
o cmake: migrate dependency detections to Find modules [183]
o cmake: more small tidy-ups and fixes [80]
o cmake: rename wolfSSL and zstd config variables to uppercase [151]
o cmake: respect cflags/libdirs of native pkg-config detections [175]
o cmake: show CMake platform/compiler flags [63]
o cmake: show warning if libpsl is not found [154]
o cmake: sync code between test/example targets [234]
o cmake: sync up formatting in Find modules [129]
o cmake: TLS 1.3 warning only for bearssl and sectranp [118]
o cmake: update `curl-config.cmake.in` template var list
o cmake: update list of "advanced" variables [119]
o cmake: use numeric comparison for `HAVE_WIN32_WINNT` [69]
o cmdline-opts: language fix for expect100-timeout.md and max-time.md [192]
o configure: delete unused `CURL_DEFINE_UNQUOTED` function [224]
o configure: delete unused `HAVE_OPENSSL3` macro [225]
o configure: delete unused `m4/xc-translit.m4` [114]
o configure: detect AppleIDN [70]
o configure: fail if PSL is not disabled but not found [46]
o configure: fix WinIDN builds targeting old Windows [210]
o configure: remove USE_EXPLICIT_LIB_DEPS [199]
o configure: replace nonportable grep -o with awk [111]
o connect: always prefer ipv6 in IP eyeballing [209]
o connect: limit update IP info [191]
o cookie.md: try to articulate the two different uses this option has [92]
o curl: allow 500MB data URL encode strings [38]
o curl: find curlrc in XDG_CONFIG_HOME without leading dot [186]
o curl: fix --proxy-pinnedpubkey [91]
o curl: fix the -w urle.* variables [153]
o curl: make the progress bar detect terminal width changes [169]
o curl: warn on unsupported SSL options [106]
o Curl_rand_bytes to control env override [17]
o curl_sha512_256: fix symbol collisions with nettle library [131]
o CURLMOPT_SOCKETFUNCTION.md: expand on the easy argument [216]
o CURLOPT_XFERINFOFUNCTION: clarify the callback return codes [141]
o dist: add missing `docs/examples/CMakeLists.txt` [58]
o dist: add missing `FindNettle.cmake` [11]
o dist: add missing `lib/optiontable.pl` [115]
o dist: add missing `test_*.py` scripts [102]
o dist: drop buildconf [65]
o dist: fix reproducible build from release tarball [36]
o dmaketgz: only run 'make distclean' if Makefile exists
o docs/SSLCERTS: rewrite [174]
o docs: add description of effect of --location-trusted on cookie [157]
o docs: document the (weak) random value situation in rustls builds [252]
o docs: fix some examples in man pages
o docs: improve cipher options documentation [159]
o docs: mention "@-" in more places [67]
o docs: remove ALTSVC.md, HSTS.md, HTTP2.md and PARALLEL-TRANSFERS.md [105]
o docs: update CIPHERS.md [140]
o doh-url.md: point out DOH server IP pinning [37]
o doh: remove redundant checks [242]
o easy: fix curl_easy_upkeep for shared connection caches [52]
o escape: allow curl_easy_escape to generate 3*input length output [39]
o FEATURES.md: fix typo [180]
o ftp: always offer line end conversions [219]
o ftp: flush pingpong before response [73]
o getinfo: return zero for unsupported options (when disabled) [189]
o GHA/windows: enable MulitSSL in an MSVC job [2]
o GHA: scan git repository and detect unvetted binary files [3]
o gnutls/wolfssl: improve error message when certificate fails [125]
o gnutls: send all data [230]
o gtls: fix OCSP stapling management [206]
o haproxy: send though next filter [222]
o hash: provide asserts to verify API use [96]
o http/2: simplify eos/blocked handling [90]
o http2+h3 filters: fix ctx init [142]
o http2: fix GOAWAY message sent to server [171]
o http2: improve rate limiting of downloads [33]
o http2: improved upload eos handling [41]
o http3.md: mention how the fallback can be h1 or h2 [194]
o hyper: call Curl_req_set_upload_done() [126]
o idn: more strictly check AppleIDN errors [98]
o idn: support non-UTF-8 input under AppleIDN [99]
o INSTALL.md: MultiSSL and QUIC are mutually exclusive [7]
o KNOWN_BUGS: "special characers" in URL works with aws-sigv4 [81]
o krb5: add Linux/macOS CI tests, fix cmake GSS detection [83]
o krb5: fix `-Wcast-align` [95]
o lib: add eos flag to send methods [14]
o lib: avoid macro collisions between wolfSSL and GnuTLS headers [133]
o lib: convert some debugf()s into traces [8]
o lib: delete stray undefs for `vsnprintf`, `vsprintf` [152]
o lib: fix AIX build issues [112]
o lib: fix building with wolfSSL without DES support [134]
o lib: make SSPI global symbols use Curl_ prefix [251]
o lib: prefer `CURL_SHA256_DIGEST_LENGTH` over the unprefixed name [132]
o lib: remove the final strncpy() calls [240]
o lib: remove use of RANDOM_FILE [235]
o libcurl.def: move from / into lib [238]
o libcurl.pc: add `Cflags.private` [10]
o libcurl.pc: add reference to `libgsasl` [150]
o libcurl/docs: expand on redirect following and secrets to other hosts [85]
o llist: remove direct struct accesses, use only functions [72]
o Makefile.dist: fix `ca-firefox` target [254]
o Makefile.mk: fixup enabling libidn2 [61]
o Makefile: remove 'scripts' duplicate from DIST_SUBDIRS
o maketgz: accept option to include latest commit hash [5]
o maketgz: fix RELEASE-TOOLS.md for daily tarballs [243]
o maketgz: move from / into scripts [237]
o managen: fix superfluous leading blank line in quoted sections [211]
o managen: in man output, remove the leading space from examples [198]
o managen: wordwrap long example lines in ASCII output [143]
o manpage: ensure a maximum width for the text version [75]
o max-filesize.md: mention zero disables the limit [93]
o mbedtls: add more informative logging [162]
o mbedtls: fix setting tls version [200]
o mbedtls: no longer use MBEDTLS_SSL_VERIFY_OPTIONAL [181]
o mime: avoid inifite loop in client reader [155]
o mk-ca-bundle.pl: include a link to the caextract webpage [68]
o multi: make the "general" list of easy handles a Curl_llist [97]
o multi: on socket callback error, remove socket hash entry nonetheless [149]
o ngtcp2/osslq: remove NULL pointer dereferences [213]
o ngtcp2: use NGHTTP3 prefix instead of NGTCP2 for errors in h3 callbacks [79]
o openssl quic: fix memory leak [229]
o openssl: certinfo errors now fail correctly [250]
o openssl: fix the data race when sharing an SSL session between threads [221]
o openssl: improve shutdown handling [44]
o pingpong: drain the input buffer when reading responses [193]
o POP3: fix multi-line responses [168]
o pop3: use the protocol handler ->write_resp [220]
o printf: fix mingw-w64 format checks [228]
o progress: ratelimit/progress tweaks [32]
o pytests: add tests for HEAD requests in all HTTP versions [42]
o rand: only provide weak random when needed [233]
o runtests: if DISABLED cannot be read, error out [56]
o runtests: log ignored but passed tests [130]
o runtests: remove "has_textaware" [217]
o rustls: fix setting tls version [202]
o rustls: make all tests pass [1]
o schannel: avoid malloc for CAinfo_blob_digest [247]
o scorecard: tweak request measurements [139]
o sectransp: fix setting tls version [204]
o SECURITY: mention OpenSSF best practices gold badge [161]
o setopt: allow CURLOPT_INTERFACE to be set to NULL [165]
o setopt: let CURLOPT_ECH set to NULL reset to default [187]
o setopt: make CURLOPT_TFTP_BLKSIZE accept bad values [184]
o sha256: fix symbol collision between nettle (GnuTLS) and OpenSSL [135]
o share: don't reinitialize conncache [214]
o sigpipe: init the struct so that first apply ignores [49]
o smb: convert superflous assign into assert [246]
o smtp: add tracing feature [120]
o splay: use access functions, add asserts, use Curl_timediff [121]
o spnego_gssapi: implement TLS channel bindings for openssl [146]
o src: delete `curlx_m*printf()` aliases [197]
o src: fix potential macro confusion in cmake unity builds [208]
o src: namespace symbols clashing with lib [248]
o src: replace copy of printf mappings with an include [190]
o ssh: deduplicate SSH backend includes (and fix libssh cmake unity build) [177]
o system_win32: fix typo
o test httpd: tweak cipher list [124]
o test1521: verify setting options to NULL better [182]
o test1707: output diff more for debugging differences in CI outputs
o test556: improve robustness [64]
o test579: improve robustness [60]
o test587: improve robustness [123]
o test649: improve robustness [122]
o test677: improve robustness [47]
o tests/runner: only allow [!A-Za-z0-9_-] in %if feature names [55]
o tests: constrain http pytest to tests/http directory [205]
o tests: don't mangle output if hostname or type unknown
o tests: ignore QUIT from FTP protocol comparisons [108]
o tests: provide docs as curldown, not nroff [12]
o tidy-up: misc build, tests, `lib/macos.c` [172]
o tidy-up: OS names [57]
o tool_operhlp: fix "potentially uninitialized local variable 'pc' used" [48]
o tool_paramhlp: bump maximum post data size in memory to 16GB [128]
o transfer: Curl_sendrecv() and event related improvements [164]
o transfer: remove comments, add asserts [218]
o transfer: skip EOS read when download done [196]
o url: dns_entry related improvements [16]
o url: fix connection reuse for HTTP/2 upgrades [236]
o urlapi: verify URL *decoded* hostname when set [160]
o urldata: introduce `data->mid`, a unique identifier inside a multi [127]
o urldata: remove 'scratch' from the UrlState struct [86]
o urldata: remove crlf_conversions counter [232]
o urldata: remove proxy_connect_closed bit [178]
o verify-release: shell script that verifies a release tarball [29]
o version: fix shadowing a `libssh.h` symbol [176]
o vtls: add SSLSUPP_CIPHER_LIST [107]
o vtls: fix MSVC 'cast truncates constant value' warning [23]
o vtls: fix static function name collisions between TLS backends [136]
o vtls: init ssl peer only once [15]
o websocket: introduce blocking sends [145]
o wolfssl: avoid taking cached x509 store ref if sslctx already using it [88]
o wolfssl: fix CURLOPT_SSLVERSION [144]
o wolfssl: fix setting tls version [201]
o wolfssl: improve shutdown handling [43]
o ws: flags to opcodes should ignore CURLWS_CONT flag [104]
o x509asn1: raise size limit for x509 certification information [28]
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
with some kernel build changes KVER also contains the -ipfire string
so this has to be removed in u-boot.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
If we set up our /dev manually, we fail to deal with dynmically allocated loop
devices which are more common on modern distributions.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This reverts commit 7ad12edfb0.
This patch does not fix the original problem and still leaves the build
environment without usable loop devices.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 20240813 to 20240910
- Update of rootfile not required
- Changelog
20240910
Security updates for INTEL-SA-01103
Security updates for INTEL-SA-01097
Update for functional issues. Refer to Intel® Core™ Ultra Processor for details.
Update for functional issues. Refer to 13th Generation Intel® Core™ Processor
Specification Update for details.
Update for functional issues. Refer to 12th Generation Intel® Core™ Processor
Family for details.
Update for functional issues. Refer to Intel® Processors and Intel® Core™ i3
N-Series for details.
For information on New Platforms and Updated Platforms see
https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/releases/tag/microcode-20240910
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
