Some users assume that "check filesystem" does more than
just trigger a simple "fsck" run. This patch changes the
button label to avoid confusion.
Signed-off-by: Leo-Andres Hofmann <hofmann@leo-andres.de>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
- rootfile for iotop is significantly different with python-3.10.8 compared to 3.10.1
Many entries now missing and iotop placed in bin instead of sbin despite source tarball
setup.py having a "dirty hack to make sure iotop is installed in sbin instead of bin"
- Added lines to lfs to move iotop from /bin to /sbin
- Tested iotop out with python-3.10.8 installed vm system and it worked without any
problems, the same as the existing version running with python-3.10.1
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- With python-3.10.8 the plist.so is no longer available in the site packages.
libplist libraries are still available.
- libplist is only used as a dependency for shairport-sync
Tested by installing shairport-sync and starting/stopping it. Started and stopped
successfully without any error messages. This would suggest that the libplist
libraries are probably being picked up successfully. Cannot test properly as I have
no Apple/iOS or related products.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- The change to python-3.10.8 caused the rootfile to have temp build files from /root/.cache
to be included in it. Added commands to remove these temp build files so they were not
included to the rootfile.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 1.26.9 to 1.26.12
- Update of rootfile
- Changelog
1.26.12 (2022-08-22)
* Deprecated the `urllib3[secure]` extra and the `urllib3.contrib.pyopenssl` module.
Both will be removed in v2.x. See this `GitHub issue <https://github.com/urllib3/urllib3/issues/2680>`_
for justification and info on how to migrate.
1.26.11 (2022-07-25)
* Fixed an issue where reading more than 2 GiB in a call to ``HTTPResponse.read`` would
raise an ``OverflowError`` on Python 3.9 and earlier.
1.26.10 (2022-07-07)
* Removed support for Python 3.5
* Fixed an issue where a ``ProxyError`` recommending configuring the proxy as HTTP
instead of HTTPS could appear even when an HTTPS proxy wasn't configured.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 4.1.1 to 4.4.0
- Update of rootfile
- Changelog
# Release 4.4.0 (October 6, 2022)
- Add `typing_extensions.Any` a backport of python 3.11's Any class which is
subclassable at runtime. (backport from python/cpython#31841, by Shantanu
and Jelle Zijlstra). Patch by James Hilton-Balfe (@Gobot1234).
- Add initial support for TypeVarLike `default` parameter, PEP 696.
Patch by Marc Mueller (@cdce8p).
- Runtime support for PEP 698, adding `typing_extensions.override`. Patch by
Jelle Zijlstra.
- Add the `infer_variance` parameter to `TypeVar`, as specified in PEP 695.
Patch by Jelle Zijlstra.
# Release 4.3.0 (July 1, 2022)
- Add `typing_extensions.NamedTuple`, allowing for generic `NamedTuple`s on
Python <3.11 (backport from python/cpython#92027, by Serhiy Storchaka). Patch
by Alex Waygood (@AlexWaygood).
- Adjust `typing_extensions.TypedDict` to allow for generic `TypedDict`s on
Python <3.11 (backport from python/cpython#27663, by Samodya Abey). Patch by
Alex Waygood (@AlexWaygood).
# Release 4.2.0 (April 17, 2022)
- Re-export `typing.Unpack` and `typing.TypeVarTuple` on Python 3.11.
- Add `ParamSpecArgs` and `ParamSpecKwargs` to `__all__`.
- Improve "accepts only single type" error messages.
- Improve the distributed package. Patch by Marc Mueller (@cdce8p).
- Update `typing_extensions.dataclass_transform` to rename the
`field_descriptors` parameter to `field_specifiers` and accept
arbitrary keyword arguments.
- Add `typing_extensions.get_overloads` and
`typing_extensions.clear_overloads`, and add registry support to
`typing_extensions.overload`. Backport from python/cpython#89263.
- Add `typing_extensions.assert_type`. Backport from bpo-46480.
- Drop support for Python 3.6. Original patch by Adam Turner (@AA-Turner).
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.21.0 to 0.22.0
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 1.2.0 to 1.3.0
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 62.0.0 to 65.4.1
- Update of rootfile
- Changelog is too large to include here. Details can be found in the CHANGES.rst file
in the source tarball. Most of the changes are bug fixes
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.5.2 to 0.6.0
- Update of rootfile- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 2.27.1 to 2.28.1
- Update of rootfile
- Changelog
2.28.1 (2022-06-29)
**Improvements**
- Speed optimization in `iter_content` with transition to `yield from`. (#6170)
**Dependencies**
- Added support for chardet 5.0.0 (#6179)
- Added support for charset-normalizer 2.1.0 (#6169)
2.28.0 (2022-06-09)
**Deprecations**
- ⚠️ Requests has officially dropped support for Python 2.7. ⚠️ (#6091)
- Requests has officially dropped support for Python 3.6 (including pypy3.6). (#6091)
**Improvements**
- Wrap JSON parsing issues in Request's JSONDecodeError for payloads without
an encoding to make `json()` API consistent. (#6097)
- Parse header components consistently, raising an InvalidHeader error in
all invalid cases. (#6154)
- Added provisional 3.11 support with current beta build. (#6155)
- Requests got a makeover and we decided to paint it black. (#6095)
**Bugfixes**
- Fixed bug where setting `CURL_CA_BUNDLE` to an empty string would disable
cert verification. All Requests 2.x versions before 2.28.0 are affected. (#6074)
- Fixed urllib3 exception leak, wrapping `urllib3.exceptions.SSLError` with
`requests.exceptions.SSLError` for `content` and `iter_content`. (#6057)
- Fixed issue where invalid Windows registry entires caused proxy resolution
to raise an exception rather than ignoring the entry. (#6149)
- Fixed issue where entire payload could be included in the error message for
JSONDecodeError. (#6036)
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 2022.1 to 2022.4
- Update of rootfile
- Changelog
2022.4
An update to pytz has been released, containing the IANA 2022d timezone database.
There are no code changes.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 3.0.7 to 3.0.9
- Update of rootfile
- Changelog
Version 3.0.9 -
- Added Unicode set `BasicMultilingualPlane` (may also be referenced
as `BMP`) representing the Basic Multilingual Plane (Unicode
characters up to code point 65535). Can be used to parse
most language characters, but omits emojis, wingdings, etc.
Raised in discussion with Dave Tapley (issue #392).
- To address mypy confusion of `pyparsing.Optional` and `typing.Optional`
resulting in `error: "_SpecialForm" not callable` message
reported in issue #365, fixed the import in exceptions.py. Nice
sleuthing by Iwan Aucamp and Dominic Davis-Foster, thank you!
(Removed definitions of `OptionalType`, `DictType`, and `IterableType`
and replaced them with `typing.Optional`, `typing.Dict`, and
`typing.Iterable` throughout.)
- Fixed typo in jinja2 template for railroad diagrams, thanks for the
catch Nioub (issue #388).
- Removed use of deprecated `pkg_resources` package in
railroad diagramming code (issue #391).
- Updated bigquery_view_parser.py example to parse examples at
https://cloud.google.com/bigquery/docs/reference/legacy-sql
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 3.2.1 to 3.2.2
- Version 3.2.2 is a cythonised version of 3.2.1 resulting in no longer requiring Cython
- Update of rootfile
- Changelog
Release 3.2.2 (2022-09-28)
* remove support for python 3.5 (broken, out of support by python devs)
* cythonize with latest Cython 0.29.x (brings Python 3.11 support)
* use github actions for CI, remove travis-ci
* update README: minimal maintenance, not developed
* update setup.py with tested python versions
* examples/tmpfs.py: work around strange kernel behaviour (calling SETATTR after
UNLINK of a (not open) file): respond with ENOENT instead of crashing.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 1.0.3 to 1.0.4
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 1.0.0 to 1.0.1
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 3.3 to 3.4
- Update of rootfile
- Changelog
3.4 (2022-09-14)
- Update to Unicode 15.0.0
- Migrate to pyproject.toml for build information (PEP 621)
- Correct another instance where generic exception was raised instead of
IDNAError for malformed input
- Source distribution uses zeroized file ownership for improved
reproducibility
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.18.1 to 0.19
- Update of rootfile
- Changelog
Release 0.19 (2022-07-05)
* General
- Dropped support for Python 2.7, 3.5, and 3.6. and removed compatibility
hacks from code and tests.
- Code cleanup,
check PEP 8 conformity with `flake8` (exceptions in file tox.ini).
* docutils/__main__.py
- New module. Support for ``python -m docutils``.
Also used for the ``docutils`` console script `entry point`.
* docutils/core.py:
- Let `Publisher.publish()` print info and prompt when waiting for input
from a terminal (cf. https://clig.dev/#interactivity).
- Respect "input_encoding_error_handler" setting when opening a source.
* docutils/io.py
- New function `error_string()`
obsoletes `utils.error_reporting.ErrorString`.
- Class `ErrorOutput` moved here from `utils/error_reporting`.
- Use "utf-8-sig" instead of Python's default encoding if the
"input_encoding" setting is None.
- Fix error when reading of UTF-16 encoded source without trailing newline.
* docutils/parsers/__init__.py
- Aliases "markdown" and "commonmark" point to "commonmark_wrapper".
- Alias for the "myst" parser (https://pypi.org/project/myst-docutils).
- Use absolute module names in `_parser_aliases` instead of two
import attempts. (Keeps details if the `recommonmark_wrapper.py` module
raises an ImportError.)
- Prepend parser name to ImportError if importing a parser class fails.
* docutils/parsers/commonmark_wrapper.py
- New module for parsing CommonMark input. Selects a locally installed
3rd-party parser (pycmark, myst, or recommonmark).
* docutils/parsers/recommonmark_wrapper.py
- Raise ImportError, if import of the upstream parser module fails.
If called from an `"include" directive`_,
the system-message now has source/line info.
- Adapt to and test with "recommonmark" versions 0.6.0 and 0.7.1.
.. _"include" directive: docs/ref/rst/directives.html#include
* docutils/parsers/rst/__init__.py
- Update PEP base URL (fixes bug #445),
use "https:" scheme in RFC base URL.
- Add `reporter` to `Directive` class attributes.
* docutils/parsers/rst/directives/__init__.py
- `parser_name()` keeps details if converting ImportError to ValueError.
* docutils/parsers/rst/roles.py
- Don't use mutable default values for function arguments. Fixes bug #430.
* docutils/transforms/universal.py
- Fix bug #435: invalid references in `problematic` nodes
with report_level=4.
* docutils/utils/__init__.py
- `decode_path()` returns `str` instance instead of `nodes.reprunicode`.
* docutils/utils/error_reporting.py
- Add deprecation warning.
* docutils/writers/_html_base.py
- Add "html writers" to `config_section_dependencies`. Fixes bug #443.
- Write table column widths with 3 digits precision. Fixes bug #444.
* docutils/writers/html5_polyglot/__init__.py
- Add space before "charset" meta tag closing sequence.
- Remove class value "controls" from an `image` node with video content
after converting it to a "control" attribute of the <video> tag.
- Wrap groups of footnotes in an ``<aside>`` for easier styling.
* docutils/writers/pep_html/
- Use "https:" scheme in "python_home" URL default.
- Fix links in template.txt.
* setup.py:
- New "docutils" console script `entry point`__. Fixes bug #447.
__ https://packaging.python.org/en/latest/specifications/entry-points/
* test/alltests.py
- Always encode the log file "alltests.out" using 'utf-8'.
* test/DocutilsTestSupport.py
- `exception_data()` now returns None if no exception was raised.
- `recommonmark_wrapper` only imported if upstream parser is present.
* test/test_parsers/test_rst/test_directives/test_tables.py
- Fix bug #436: Null char valid in CSV since Python 3.11.
* tools/docutils-cli.py
- Allow 3rd-party drop-in components for reader and parser, too.
- Fix help output.
- Actual code moved to docutils.__main__.py.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.4.4 to 0.4.5
- Update of rootfile
- Changelog
0.4.5
* Catch a racy ValueError that could occur on exit.
* Create README-hacking.md, for Colorama contributors.
* Tweak some README unicode characters that don't render correctly on PyPI.
* Fix some tests that were failing on some operating systems.
* Add support for Python 3.9.
* Add support for PyPy3.
* Add support for pickling with the ``dill`` module.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 8.1.2 to 8.1.3
- Update of rootfile
- Changelog
Version 8.1.3
- Use verbose form of ``typing.Callable`` for ``@command`` and
``@group``. :issue:`2255`
- Show error when attempting to create an option with
``multiple=True, is_flag=True``. Use ``count`` instead.
:issue:`2246`
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 1.3.2 to 1.4.0
- Update of rootfile
- Changelog
1.4.0 Latest
The circuitbreaker project has been classified as "Critical Project" on PyPI, meaning it belongs to the top 1% of all projects on PyPI based on the downloads over the last 6 months. We're working an important peace here 🙂
Fallback Function
By default, the circuit breaker will raise a CircuitBreaker exception when the circuit is opened. You can instead specify a function to be called when the circuit is opened. This function can be specified with the fallback_function parameter and will be called with the same parameters as the decorated function would be.
Custom callable for handling exceptions
The logic for handling thrown exceptions as failures can now be customized by passing a callable. The callable will be passed the exception type and value, and should return True if the exception should be treated as a failure.
Monotonic clock
Using the wall clock to measure durations is vulnerable to changes in the system clock causing misbehavior - a clock accidentally set far in the future and later reset could result in the circuit breaker remaining open for a great deal longer than expected. To solve this, a monotonic clock is now used for timing open states.
Circuitbreaker default name
The circuitbreaker default names are now taken from __qualname__ if available for more precise default naming.
Fixes and tooling
the project is now built on Github Action instead of Travis CI
building for python 3.10
applied smaller flake8 fixes
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 2.0.12 to 2.1.1
- Update of rootfile
- Changelog
## [2.1.1](https://github.com/Ousret/charset_normalizer/compare/2.1.0...2.1.1) (2022-08-19)
### Deprecated
- Function `normalize` scheduled for removal in 3.0
### Changed
- Removed useless call to decode in fn is_unprintable (#206)
### Fixed
- Third-party library (i18n xgettext) crashing not recognizing utf_8 (PEP 263) with underscore from [@aleksandernovikov](https://github.com/aleksandernovikov) (#204)
## [2.1.0](https://github.com/Ousret/charset_normalizer/compare/2.0.12...2.1.0) (2022-06-19)
### Added
- Output the Unicode table version when running the CLI with `--version` (PR #194)
### Changed
- Re-use decoded buffer for single byte character sets from [@nijel](https://github.com/nijel) (PR #175)
- Fixing some performance bottlenecks from [@deedy5](https://github.com/deedy5) (PR #183)
### Fixed
- Workaround potential bug in cpython with Zero Width No-Break Space located in Arabic Presentation Forms-B, Unicode 1.1 not acknowledged as space (PR #175)
- CLI default threshold aligned with the API threshold from [@oleksandr-kuzmenko](https://github.com/oleksandr-kuzmenko) (PR #181)
### Removed
- Support for Python 3.5 (PR #192)
### Deprecated
- Use of backport unicodedata from `unicodedata2` as Python is quickly catching up, scheduled for removal in 3.0 (PR #194)
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 1.15.0 to 1.15.1
- Update of rootfile
- Changelog
v1.15.1
If you call ffi.embedding_api() but don’t write any extern “Python” function there, then the resulting C code would fail an assert. Fixed.
Updated Windows/arm64 embedded libffi static lib to v3.4.2, and scripted to ease future updates (thanks Niyas Sait!)
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 2021.10.8 to 2022.9.4
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 1.25.12 to 1.27.89
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 1.2.2 to 1.2.3
- Update of rootfile
- Changelog
1.2.3 (2022-06-25)
- [NEW] Added Amharic, Armenian, Georgian, Laotian and Uzbek locales.
- [FIX] Updated Danish locale and associated tests.
- [INTERNAl] Small fixes to CI.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.15.1 to 0.15.2
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.15.1 to 0.15.2
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.15.1 to 0.15.2
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 1.0.2 to 1.1.0
- Update of rootfile
- Changelog found in source tarball stops at version 1.0.1 No changelog found elsewhere
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.13.0 to 0.15.5
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.13.0 to 0.15.5
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.8.7 to 0.12.2
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.8.7 to 0.12.2
- Update of rootfile
- No changelog found in source tarball or other location
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Install of version 0.1.51
- Definition of rootfile
- Creation of metadata patch to eliminate windows options
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 0.4.19 to 0.4.22
- Update of rootfile
- Update of metadata patch as more windows related entries in Cargo.toml to be excluded
- Changelog
## 0.4.22
* Allow wasmbindgen to be optional on `wasm32-unknown-unknown` target [(#771)](https://github.com/chronotope/chrono/pull/771)
* Fix compile error for `x86_64-fortanix-unknown-sgx` [(#767)](https://github.com/chronotope/chrono/pull/767)
* Update `iana-time-zone` version to 1.44 [(#773)](https://github.com/chronotope/chrono/pull/773)
## 0.4.21
* Fall back to UTC timezone in cases where no timezone is found [(#756)](https://github.com/chronotope/chrono/pull/756)
* Correctly detect timezone on Android [(#756)](https://github.com/chronotope/chrono/pull/756)
* Improve documentation for strftime `%Y` specifier [(#760)](https://github.com/chronotope/chrono/pull/760)
## 0.4.20
* Add more formatting documentation and examples.
* Add support for microseconds timestamps serde serialization/deserialization (#304)
* Fix `DurationRound` is not TZ aware (#495)
* Implement `DurationRound` for `NaiveDateTime`
* Implement `std::iter::Sum` for `Duration`
* Add `DateTime::from_local()` to construct from given local date and time (#572)
* Add a function that calculates the number of years elapsed between now and a given `Date` or `DateTime` (#557)
* Correct build for wasm32-unknown-emscripten target (#568)
* Change `Local::now()` and `Utc::now()` documentation from "current date" to "current date and time" (#647)
* Fix `duration_round` panic on rounding by `Duration::zero()` (#658)
* Add optional rkyv support.
* Add support for microseconds timestamps serde serialization for `NaiveDateTime`.
* Add support for optional timestamps serde serialization for `NaiveDateTime`.
* Fix build for wasm32-unknown-emscripten (@yu-re-ka #593)
* Make `ParseErrorKind` public and available through `ParseError::kind()` (#588)
* Implement `DoubleEndedIterator` for `NaiveDateDaysIterator` and `NaiveDateWeeksIterator`
* Fix panicking when parsing a `DateTime` (@botahamec)
* Add support for getting week bounds based on a specific `NaiveDate` and a `Weekday` (#666)
* Remove libc dependency from Cargo.toml.
* Add the `and_local_timezone` method to `NaiveDateTime`
* Fix the behavior of `Duration::abs()` for negative durations with non-zero nanos
* Add compatibility with rfc2822 comments (#733)
* Make `js-sys` and `wasm-bindgen` enabled by default when target is `wasm32-unknown-unknown` for ease of API discovery
* Add the `Months` struct and associated `Add` and `Sub` impls
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 36.0.2 to 38.0.1
- Update of rootfile
- Changelog
38.0.1 - 2022-09-07
Fixed parsing TLVs in ASN.1 with length greater than 65535 bytes (typically seen in large CRLs).
38.0.0 - 2022-09-06
Final deprecation of OpenSSL 1.1.0. The next release of cryptography will drop support.
We no longer ship many linux 2010 wheels. Users should upgrade to the latest pip to ensure this doesn’t cause issues downloading wheels on their platform. We now ship manylinux_2_28 wheels for users on new enough platforms.
Updated the minimum supported Rust version (MSRV) to 1.48.0, from 1.41.0. Users with the latest pip will typically get a wheel and not need Rust installed, but check Installation for documentation on installing a newer rustc if required.
decrypt() and related methods now accept both str and bytes tokens.
Parsing CertificateSigningRequest restores the behavior of enforcing that the Extension critical field must be correctly encoded DER. See the issue for complete details.
Added two new OpenSSL functions to the bindings to support an upcoming pyOpenSSL release.
When parsing CertificateRevocationList and CertificateSigningRequest values, it is now enforced that the version value in the input must be valid according to the rules of RFC 2986 and RFC 5280.
Using MD5 or SHA1 in CertificateBuilder and other X.509 builders is deprecated and support will be removed in the next version.
Added additional APIs to SignedCertificateTimestamp, including signature_hash_algorithm, signature_algorithm, signature, and extension_bytes.
Added tbs_precertificate_bytes, allowing users to access the to-be-signed pre-certificate data needed for signed certificate timestamp verification.
KBKDFHMAC and KBKDFCMAC now support MiddleFixed counter location.
Fixed RFC 4514 name parsing to reverse the order of the RDNs according to the section 2.1 of the RFC, affecting method from_rfc4514_string().
It is now possible to customize some aspects of encryption when serializing private keys, using encryption_builder().
Removed several legacy symbols from our OpenSSL bindings. Users of pyOpenSSL versions older than 22.0 will need to upgrade.
Added AES128 and AES256 classes. These classes do not replace AES (which allows all AES key lengths), but are intended for applications where developers want to be explicit about key length.
37.0.4 - 2022-07-05
Updated Windows, macOS, and Linux wheels to be compiled with OpenSSL 3.0.5.
37.0.3 - 2022-06-21 (YANKED)¶
Attention
This release was subsequently yanked from PyPI due to a regression in OpenSSL.
Updated Windows, macOS, and Linux wheels to be compiled with OpenSSL 3.0.4.
37.0.2 - 2022-05-03
Updated Windows, macOS, and Linux wheels to be compiled with OpenSSL 3.0.3.
Added a constant needed for an upcoming pyOpenSSL release.
37.0.1 - 2022-04-27
Fixed an issue where parsing an encrypted private key with the public loader functions would hang waiting for console input on OpenSSL 3.0.x rather than raising an error.
Restored some legacy symbols for older pyOpenSSL users. These will be removed again in the future, so pyOpenSSL users should still upgrade to the latest version of that package when they upgrade cryptography.
37.0.0 - 2022-04-26
Updated Windows, macOS, and Linux wheels to be compiled with OpenSSL 3.0.2.
BACKWARDS INCOMPATIBLE: Dropped support for LibreSSL 2.9.x and 3.0.x. The new minimum LibreSSL version is 3.1+.
BACKWARDS INCOMPATIBLE: Removed signer and verifier methods from the public key and private key classes. These methods were originally deprecated in version 2.0, but had an extended deprecation timeline due to usage. Any remaining users should transition to sign and verify.
Deprecated OpenSSL 1.1.0 support. OpenSSL 1.1.0 is no longer supported by the OpenSSL project. The next release of cryptography will be the last to support compiling with OpenSSL 1.1.0.
Deprecated Python 3.6 support. Python 3.6 is no longer supported by the Python core team. Support for Python 3.6 will be removed in a future cryptography release.
Deprecated the current minimum supported Rust version (MSRV) of 1.41.0. In the next release we will raise MSRV to 1.48.0. Users with the latest pip will typically get a wheel and not need Rust installed, but check Installation for documentation on installing a newer rustc if required.
Deprecated CAST5, SEED, IDEA, and Blowfish because they are legacy algorithms with extremely low usage. These will be removed in a future version of cryptography.
Added limited support for distinguished names containing a bit string.
We now ship universal2 wheels on macOS, which contain both arm64 and x86_64 architectures. Users on macOS should upgrade to the latest pip to ensure they can use this wheel, although we will continue to ship x86_64 specific wheels for now to ease the transition.
This will be the final release for which we ship manylinux2010 wheels. Going forward the minimum supported manylinux ABI for our wheels will be manylinux2014. The vast majority of users will continue to receive manylinux wheels provided they have an up to date pip. For PyPy wheels this release already requires manylinux2014 for compatibility with binaries distributed by upstream.
Added support for multiple OCSPSingleResponse in a OCSPResponse.
Restored support for signing certificates and other structures in X.509 with SHA3 hash algorithms.
TripleDES is disabled in FIPS mode.
Added support for serialization of PKCS#12 CA friendly names/aliases in serialize_key_and_certificates()
Added support for 12-15 byte (96 to 120 bit) nonces to AESOCB3. This class previously supported only 12 byte (96 bit).
Added support for AESSIV when using OpenSSL 3.0.0+.
Added support for serializing PKCS7 structures from a list of certificates with serialize_certificates.
Added support for parsing RFC 4514 strings with from_rfc4514_string().
Added AUTO to PSS. This can be used to verify a signature where the salt length is not already known.
Added DIGEST_LENGTH to PSS. This constant will set the salt length to the same length as the PSS hash algorithm.
Added support for loading RSA-PSS key types with load_pem_private_key() and load_der_private_key(). This functionality is limited to OpenSSL 1.1.1e+ and loads the key as a normal RSA private key, discarding the PSS constraint information.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Updated from version 6.4.2 to 7.0.5
- Update of rootfile
- Changelog
v7.0.5
Merge pull request #746 from RonnyPfannschmidt/release-prep
v7.0.4
Merge pull request #739 from RonnyPfannschmidt/fix-738-protect-relative-to
v7.0.3
What's Changed
Hg / pip compatibility by @paugier in #729fix#728: remove git arguments that triggered wrong branch names by @RonnyPfannschmidt in #730fix#691 - support root in pyproject.toml even for cli by @RonnyPfannschmidt in #731fix#727: correctly handle incomplete archivals from setuptools_scm_g… by @RonnyPfannschmidt in #732
cleanup pyproject loading and allow cli relative roots to be specified by @RonnyPfannschmidt in #736
Update the README: document support for Git archives by @Changaco in #734
v7.0.2
Merge pull request #724 from RonnyPfannschmidt/fix-722-self-bootstrap
v7.0.1
Merge pull request #719 from kojiromike/missing-importlib
v7.0.0
pre-commit update
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
