This script only appeared in conjunction with Core Update 75, released
January 2014. Although it is still being executed while restoring a
backup, it would only be effective if anyone tried to restore a backup
created before C75.
I don't think there is a realistic need to carry this script along any
further. In doubt, it might be better to start from scratch again rather
than trying to restore an 8 year old backup, expecting everything to be
peachy and vanilla with it.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
This reverts commit 77e3829dc1.
For the time being, shipping this was found to be too difficult, since
we cannot get linux-firmware down to an acceptable size limit.
Compressing the firmware on installations would work, but takes about 4
minutes on an Intel Xenon CPU alone, hence it is an unacceptable
workload to do for IPFire installation running on weaker hardware.
Therefore, we do not proceed with this at the moment.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Full changelog, as retrieved from https://www.zlib.net/ChangeLog.txt :
Changes in 1.2.12 (27 Mar 2022)
- Cygwin does not have _wopen(), so do not create gzopen_w() there
- Permit a deflateParams() parameter change as soon as possible
- Limit hash table inserts after switch from stored deflate
- Fix bug when window full in deflate_stored()
- Fix CLEAR_HASH macro to be usable as a single statement
- Avoid a conversion error in gzseek when off_t type too small
- Have Makefile return non-zero error code on test failure
- Avoid some conversion warnings in gzread.c and gzwrite.c
- Update use of errno for newer Windows CE versions
- Small speedup to inflate [psumbera]
- Return an error if the gzputs string length can't fit in an int
- Add address checking in clang to -w option of configure
- Don't compute check value for raw inflate if asked to validate
- Handle case where inflateSync used when header never processed
- Avoid the use of ptrdiff_t
- Avoid an undefined behavior of memcpy() in gzappend()
- Avoid undefined behaviors of memcpy() in gz*printf()
- Avoid an undefined behavior of memcpy() in _tr_stored_block()
- Make the names in functions declarations identical to definitions
- Remove old assembler code in which bugs have manifested
- Fix deflateEnd() to not report an error at start of raw deflate
- Add legal disclaimer to README
- Emphasize the need to continue decompressing gzip members
- Correct the initialization requirements for deflateInit2()
- Fix a bug that can crash deflate on some input when using Z_FIXED
- Assure that the number of bits for deflatePrime() is valid
- Use a structure to make globals in enough.c evident
- Use a macro for the printf format of big_t in enough.c
- Clean up code style in enough.c, update version
- Use inline function instead of macro for index in enough.c
- Clarify that prefix codes are counted in enough.c
- Show all the codes for the maximum tables size in enough.c
- Add gznorm.c example, which normalizes gzip files
- Fix the zran.c example to work on a multiple-member gzip file
- Add tables for crc32_combine(), to speed it up by a factor of 200
- Add crc32_combine_gen() and crc32_combine_op() for fast combines
- Speed up software CRC-32 computation by a factor of 1.5 to 3
- Use atomic test and set, if available, for dynamic CRC tables
- Don't bother computing check value after successful inflateSync()
- Correct comment in crc32.c
- Add use of the ARMv8 crc32 instructions when requested
- Use ARM crc32 instructions if the ARM architecture has them
- Explicitly note that the 32-bit check values are 32 bits
- Avoid adding empty gzip member after gzflush with Z_FINISH
- Fix memory leak on error in gzlog.c
- Fix error in comment on the polynomial representation of a byte
- Clarify gz* function interfaces, referring to parameter names
- Change macro name in inflate.c to avoid collision in VxWorks
- Correct typo in blast.c
- Improve portability of contrib/minizip
- Fix indentation in minizip's zip.c
- Replace black/white with allow/block. (theresa-m)
- minizip warning fix if MAXU32 already defined. (gvollant)
- Fix unztell64() in minizip to work past 4GB. (Daniël Hörchner)
- Clean up minizip to reduce warnings for testing
- Add fallthrough comments for gcc
- Eliminate use of ULL constants
- Separate out address sanitizing from warnings in configure
- Remove destructive aspects of make distclean
- Check for cc masquerading as gcc or clang in configure
- Fix crc32.c to compile local functions only if used
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Some files are identical which is why we don't need to ship them mutiple
times. This will save about 13 MiB of disk space and presumably the same
on the compressed distro image.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This firmware is required for a switch ASIC which we build the kernel
module for, but which is probably not usable with IPFire.
This saves about 40 MiB of compressed firmware space.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://mmonit.com/monit/changes/
"Fixed: Issue #1028: If the Monit statefile was removed, the monit
start <service> action for services with onreboot nostart option
started the service, but did not enable monitoring of said service.
The same problem occurred if a new onreboot nostart service was
added, even if the statefile did exist.
Fixed: Issue #1029: The generic protocol test truncated received
data if the response contained zeros.
Fixed: PAM authentication: Users with a valid password for
a disabled account could still login to Monit. Thanks to Youssef
Rebahi-Gilbert.
Fixed: The Monit HTTP interface could be blocked by sending
a request with an infinite stream of HTTP headers. Thanks to Youssef
Rebahi-Gilbert for report."
For more details see:
https://bitbucket.org/tildeslash/monit/commits/tag/release-5-32-0
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This package installs some firmware files. Since linux-firmware is now
compressed, files will no longer be overwritten, but this package will
put the uncompressed files next to the compressed ones.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The former used hash value only contains the country code when
a rule for a single country should be created.
In case a location group is used the hash value refers to the group name,
which does not work here.
The required country code is part of the processed string and can be omitted
from here. This works well for single codes and location groups, because those
are processed in a loop.
Fixes#12809.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Acked-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The former used hash value only contains the country code when
a rule for a single country should be created.
In case a location group is used the hash value refers to the group name,
which does not work here.
The required country code is part of the processed string and can be omitted
from here. This works well for single codes and location groups, because those
are processed in a loop.
Fixes#12809.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Acked-by: Peter Müller <peter.mueller@ipfire.org>
This patch enabled that we can compress any firmware files on disk. This
will save some space since /lib/firmware is becoming larger with every
release.
From formerly 828MiB, this is now using ~349MiB which is a saving of
about 480MiB on disk. This is helping us a lot fighting to contain the
distribution to 2GB on /.
Some other firmware that is installed in other packages is not
compressed with this patch which is a bit sad, but potentially not worth
the effort.
In order to ship this change with a Core Update, it might be intuitive
to remove /lib/firmware first and then extract the new update with all
new files. However, I do not know if this all will compress as well as
before since now the files are already individually compressed. It might
be a challenge to ship this.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
They were mistakenly placed after the IPS chains in commit
7b529f5417, but should be placed after the
connection tracking and before the IPS.
Fixes: #12815
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.16.27/doc/arm/html/notes.html#notes-for-bind-9-16-27
"Security Fixes
The rules for acceptance of records into the cache have been
tightened to prevent the possibility of poisoning if forwarders send
records outside the configured bailiwick. (CVE-2021-25220)
ISC would like to thank Xiang Li, Baojun Liu, and Chaoyi Lu from
Network and Information Security Lab, Tsinghua University, and
Changgen Zou from Qi An Xin Group Corp. for bringing this
vulnerability to our attention. [GL #2950]
TCP connections with keep-response-order enabled could leave the TCP
sockets in the CLOSE_WAIT state when the client did not properly
shut down the connection. (CVE-2022-0396) [GL #3112]
Feature Changes
DEBUG(1)-level messages were added when starting and ending the BIND
9 task-exclusive mode that stops normal DNS operation (e.g. for
reconfiguration, interface scans, and other events that require
exclusive access to a shared resource). [GL #3137]
Bug Fixes
The max-transfer-time-out and max-transfer-idle-out options were not
implemented when the BIND 9 networking stack was refactored in 9.16.
The missing functionality has been re-implemented and outgoing zone
transfers now time out properly when not progressing. [GL #1897]
TCP connections could hang indefinitely if the other party did not
read sent data, causing the TCP write buffers to fill. This has been
fixed by adding a “write” timer. Connections that are hung while
writing now time out after the tcp-idle-timeout period has elapsed.
[GL #3132]
The statistics counter representing the current number of clients
awaiting recursive resolution results (RecursClients) could
be miscalculated in certain resolution scenarios, potentially
causing the value of the counter to drop below zero. This has been
fixed. [GL #3147]"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://github.com/oetiker/rrdtool-1.x/releases/tag/v1.8.0
"Bugfixes
python bindings: properly convert double values of rrd info
failed to expand 'Py_UNUSED', Invalid usage when expanding 'Py_UNUSED'
document --showtime in xport help output
fix --use-nan-for-all-missing-data
update rrdruby.pod
add missing rrdruby.pod and rrdpython.pod to dist
Set first_weekday to 0 (Sunday), when HAVE__NL_TIME_WEEK_1STDAY is not defined
fix median calculation for all NaN inputs
fix potential leak in xport during failure
fix many warnings raised by Cppcheck
fix many compiler warnings from latest gcc
ensure proper initialization in rrd_daemon
cleanup testsuite
better testing
avoid invalid read in rrd_client
add symbols from rrdc to librrd
Fix duplicate write_changes_to_disk() calls when HAVE_LIBRADOS is true and HAVE_MMAP is false
documentation updates
for SMIN example in docs
fix for pyton3 compatibility
freemem only for valid status <Christian Kr"oger>
fix double meaning of time 0 as uninitialized value
fix for zfs not supporting fallocate. this makes resize work on zfs
add rrdrados.pod to dist
fetch - do not call rrd_freemem on uninitialized pointers
use separate pango fontmap per thread
switch to python 3
do not leak filename when opening a broken file
fix leaks in rrdcached
avoid segfault when flushing cache
escape json in legend entries
fix leak in xport
make rrdcgi param parsing more robust
fix race in journal_write"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
