* If a cgi file exists with the same name as an addon, the
displayed service will be a link to that cgi file.
Signed-off-by: Robin Roevens <robin.roevens@disroot.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
* Add restart action to services.
* Only display available actions for a service:
Start when service is stopped or Stop and Restart when a service
is running.
Signed-off-by: Robin Roevens <robin.roevens@disroot.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
* Singular 'Service' instead of plural 'Services' as column header of
services table
* Sort list of services
Signed-off-by: Robin Roevens <robin.roevens@disroot.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
* addonctrl's new functionality to control explicit addon services was
implemented.
* Change 'Addon' column header to 'Addon Service' to be clear that
it's not addons but services listed here.
* Services not matching the name of the addon now display the addon
name between parentheses, so the user knows where the service comes
from.
* When no valid runlevel symlink is found by addonctrl for a service,
the 'enable on boot' checkbox is replaced by a small exclamation point
with alt-text "No valid runlevel symlink was found for the initscript of
this service." to inform user why a service can't be enabled.
* Added German and Dutch translation for above message.
Fixes: Bug#12935
Signed-off-by: Robin Roevens <robin.roevens@disroot.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
* Addonctrl will now check in addon metadata for the exact initscript
names (Services). If more than one initscript is defined for an addon,
the requested action will be performed on all listed initscripts.
* Added posibility to perform action on a specific initscript of an
addon instead of on all initscripts of the addon.
* New action 'list-services' to display a list of services related to
an addon.
* New action 'boot-status' to display wether service(s) are enabled
to start on boot or not.
* More error checking and cleaner error reporting to user
* General cleanup and code restructuring to avoid code duplication
* Updated and made usage instructions more verbose.
Fixes: Bug#12935
Signed-off-by: Robin Roevens <robin.roevens@disroot.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
If the CRL is outdated for some reason (e.g. a backup restored from ISO
where we don't run the migration scripts), this will update it on
reboot/restart of the service.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
After a backup is restored, the CRL might be out of data and client
won't be able to connect to the server any more.
This will immediately update the CRL should it require an update.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://nlnetlabs.nl/projects/unbound/download/#unbound-1-17-0
"Features
Merge #753: ACL per interface. (New interface-* configuration options).
Merge #760: PROXYv2 downstream support. (New proxy-protocol-port configuration option).
Bug Fixes
Fix#728: alloc_reg_obtain() core dump. Stop double alloc_reg_release
when serviced_create fails.
Fix edns subnet so that scope 0 answers only match sourcemask 0 queries
for answers from cache if from a query with sourcemask 0.
Fix unittest for edns subnet change.
Merge #730 from luisdallos: Fix startup failure on Windows 8.1 due to
unsupported IPV6_USER_MTU socket option being set.
Fix ratelimit inconsistency, for ip-ratelimits the value is the amount
allowed, like for ratelimits.
Fix#734 [FR] enable unbound-checkconf to detect more (basic) errors.
Fix to log accept error ENFILE and EMFILE errno, but slowly, once per
10 seconds. Also log accept failures when no slow down is used.
Fix to avoid process wide fcntl calls mixed with nonblocking operations
after a blocked write.
Patch from Vadim Fedorenko that adds MSG_DONTWAIT to receive
operations, so that instruction reordering does not cause mistakenly
blocking socket operations.
Fix to wait for blocked write on UDP sockets, with a timeout if it
takes too long the packet is dropped.
Fix for wait for udp send to stop when packet is successfully sent.
Fix#741: systemd socket activation fails on IPv6.
Fix to update config tests to fix checking if nonblocking sockets work
on OpenBSD.
Slow down log frequency of write wait failures.
Fix to set out of file descriptor warning to operational verbosity.
Fix to log a verbose message at operational notice level if a thread is
not responding, to stats requests. It is logged with thread
identifiers.
Remove include that was there for debug purposes.
Fix to check pthread_t size after pthread has been detected.
Convert tdir tests to use the new skip_test functionality.
Remove unused testcode/mini_tpkg.sh file.
Better output for skipped tdir tests.
Fix doxygen warning in respip.h.
Fix to remove erroneous TC flag from TCP upstream.
Fix test tdir skip report printout.
Fix windows compile, the identifier interface is defined in headers.
Fix to close errno block in comm_point_tcp_handle_read outside of ifdef.
Fix static analysis report to remove dead code from the
rpz_callback_from_iterator_module function.
Fix to clean up after the acl_interface unit test.
Merge #764: Leniency for target discovery when under load (for
NRDelegation changes).
Use DEBUG_TDIR from environment in mini_tdir.sh for debugging.
Fix string comparison in mini_tdir.sh.
Make ede.tdir test more predictable by using static data.
Fix checkconf test for dnscrypt and proxy port.
Fix dnscrypt compile for proxy protocol code changes.
Fix to stop responses with TC flag from resulting in partial responses.
It retries to fetch the data elsewhere, or fails the query and in depth
fix removes the TC flag from the cached item.
Fix proxy length debug output printout typecasts.
Fix to stop possible loops in the tcp reuse code (write_wait list and
tcp_wait list). Based on analysis and patch from Prad Seniappan and
Karthik Umashankar.
Fix PROXYv2 header read for TCP connections when no proxied addresses
are provided."
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
- add help links for two new ipblocklist WebGUI pages
- update help links to proxy accounting
- add links to OpenVPN Net-to-Net Statistics,
MD Raid State, Update Accelerator,
OpenVPN Roadwarrior Connections Log
Signed-off-by: Jon Murphy <jon.murphy@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
When the bridge cannot detect a domain name for any of the leases, it
uses localdomain which is not always the best choice. So instead, this
patches changes the behaviour that we read the default domain of the
firewall.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
For reasons I have not been able to determine, the RTC
module for the Ten64 board (rtc-rx8025) is not automatically
loaded at startup, despite every other relevant modules being
loaded.
modprobe it manually if we are on a Ten64 board.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
The Ten64 board runs a U-Boot which works best directly
booting EFI. Attempting to load your own DTB or other steps
will cause issues.
(see https://ten64doc.traverse.com.au/faq/#common-issues)
The current stable Ten64 firmware unfortunately searches for
boot.scr before bootaa64.efi. So redirect it back to the EFI path.
A future Ten64 firmware package will prefer EFI first before
any boot script avoiding this issue. I will provide a patch
reversing this when that day comes.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
These two patches are needed to support SFP's on NXP DPAA2 platforms
(e.g Traverse Ten64).
The deadlock issue patch was submitted upstream a while ago and
rejected, however I am not aware of any better solutions at present.
The 10G mode additions are part of mainline since 5.16.
These two .patches were sourced from our patchset over here:
https://gitlab.com/traversetech/traverse-kernel-patches/-/tree/lts-5-15/patches
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
This change enables support for NXP's QorIQ/Layerscape platforms,
specifically the Traverse Technologies Ten64 (LS1088A).
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.2.4 plus CVE-2022-29154 patch to 3.2.6
- Patch for CVE-2022-29154 applied in CU170 turned out to have a bug within it causing
rsync to fail with an error. Four additional commits were done to fix this bug and
its consequences but these were all applied in the rsync git repo after the patch had
been merged into CU170.
- Version 3.2.5 onwards contains the CVE-2022-29154 fix and associated commits.
- No update of rootfile required.
- Changelog
NEWS for rsync 3.2.6 (9 Sep 2022)
BUG FIXES:
More path-cleaning improvements in the file-list validation code to avoid
rejecting of valid args.
A file-list validation fix for a --files-from file that ends without a
line-terminating character.
Added a safety check that prevents the sender from removing destination
files when a local copy using --remove-source-files has some files that are
shared between the sending & receiving hierarchies, including the case
where the source dir & destination dir are identical.
Fixed a bug in the internal MD4 checksum code that could cause the digest to
be sporadically incorrect (the openssl version was/is fine).
A minor tweak to rrsync added "copy-devices" to the list of known args, but
left it disabled by default.
ENHANCEMENTS:
Rename --protect-args to --secluded-args to make it clearer how it differs
from the default backslash-escaped arg-protecting behavior of rsync. The
old option names are still accepted. The environment-variable override did
not change its name.
PACKAGING RELATED:
The configure option --with-protected-args was renamed to
--with-secluded-args. This option makes --secluded-args the default rsync
behavior instead of using backslash escaping for protecting args.
The mkgitver script now makes sure that a .git dir/file is in the top-level
source dir before calling git describe. It also runs a basic check on the
version value. This should avoid using an unrelated git description for
rsync's version.
DEVELOPER RELATED:
The configure script no longer sets the -pedantic-errors CFLAG (which it
used to try to do only for gcc).
The name_num_obj struct was modified to allow its dynamic name_num_item list
to be initialized in a better way.
NEWS for rsync 3.2.5 (14 Aug 2022)
SECURITY FIXES:
Added some file-list safety checking that helps to ensure that a rogue
sending rsync can't add unrequested top-level names and/or include
recursive names that should have been excluded by the sender. These extra
safety checks only require the receiver rsync to be updated. When dealing
with an untrusted sending host, it is safest to copy into a dedicated
destination directory for the remote content (i.e. don't copy into a
destination directory that contains files that aren't from the remote host
unless you trust the remote host). Fixes CVE-2022-29154.
A fix for CVE-2022-37434 in the bundled zlib (buffer overflow issue).
BUG FIXES:
Fixed the handling of filenames specified with backslash-quoted wildcards
when the default remote-arg-escaping is enabled.
Fixed the configure check for signed char that was causing a host that
defaults to unsigned characters to generate bogus rolling checksums. This
made rsync send mostly literal data for a copy instead of finding matching
data in the receiver's basis file (for a file that contains high-bit
characters).
Lots of manpage improvements, including an attempt to better describe how
include/exclude filters work.
If rsync is compiled with an xxhash 0.8 library and then moved to a system
with a dynamically linked xxhash 0.7 library, we now detect this and
disable the XX3 hashes (since these routines didn't stabilize until 0.8).
ENHANCEMENTS:
The --trust-sender option was added as a way to bypass the extra file-list
safety checking (should that be required).
PACKAGING RELATED:
A note to those wanting to patch older rsync versions: the changes in this
release requires the quoted argument change from 3.2.4. Then, you'll want
every single code change from 3.2.5 since there is no fluff in this release.
The build date that goes into the manpages is now based on the developer's
release date, not on the build's local-timezone interpretation of the date.
DEVELOPER RELATED:
Configure now defaults GETGROUPS_T to gid_t when cross compiling.
Configure now looks for the bsd/string.h include file in order to fix the
build on a host that has strlcpy() in the main libc but not defined in the
main string.h file.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Since last time we checked, the kernel's security features on ARM have
improved notably (see CONFIG_RANDOMIZE_BASE discussion). This patch
therefore proposes to give the seccomp filter on both 32- and 64-bit ARM
another try, since it provides significant security benefit to
applications using it.
Due to operational constraints, rootfile changes have been omitted, and
will be conducted, should this patch be approved.
Note to future self: Once this patch is approved, applications using
seccomp (OpenSSH, Tor) need to be updated/shipped on ARM.
Fixes: #12366Fixes: #12370
Cc: Arne Fitzenreiter <arne.fitzenreiter@ipfire.org>
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
From the kernels' documentation:
> Uprobes is the user-space counterpart to kprobes: they
> enable instrumentation applications (such as 'perf probe')
> to establish unintrusive probes in user-space binaries and
> libraries, by executing handler functions when the probes
> are hit by user-space applications.
>
> ( These probes come in the form of single-byte breakpoints,
> managed by the kernel and kept transparent to the probed
> application. )
To the best of the authors' understanding, no application on IPFire
needs this functionality, and given its abuse potential, we should
probably not enable it.
As expected, strace functionality is not impaired by this.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
