- Update from version 9.6p1 to 9.7p1
- Update of rootfile not required
- Changelog
9.7p1
Future deprecation notice
OpenSSH plans to remove support for the DSA signature algorithm in
early 2025 and compile-time disable it later this year.
DSA, as specified in the SSHv2 protocol, is inherently weak - being
limited to a 160 bit private key and use of the SHA1 digest. Its
estimated security level is only 80 bits symmetric equivalent.
OpenSSH has disabled DSA keys by default since 2015 but has retained
run-time optional support for them. DSA was the only mandatory-to-
implement algorithm in the SSHv2 RFCs[3], mostly because alternative
algorithms were encumbered by patents when the SSHv2 protocol was
specified.
This has not been the case for decades at this point and better
algorithms are well supported by all actively-maintained SSH
implementations. We do not consider the costs of maintaining DSA in
OpenSSH to be justified and hope that removing it from OpenSSH can
accelerate its wider deprecation in supporting cryptography
libraries.
This release makes DSA support in OpenSSH compile-time optional,
defaulting to on. We intend the next release to change the default
to disable DSA at compile time. The first OpenSSH release of 2025
will remove DSA support entirely.
This release contains mostly bugfixes.
New features
* ssh(1), sshd(8): add a "global" ChannelTimeout type that watches
all open channels and will close all open channels if there is no
traffic on any of them for the specified interval. This is in
addition to the existing per-channel timeouts added recently.
This supports situations like having both session and x11
forwarding channels open where one may be idle for an extended
period but the other is actively used. The global timeout could
close both channels when both have been idle for too long.
* All: make DSA key support compile-time optional, defaulting to on.
Bugfixes
* sshd(8): don't append an unnecessary space to the end of subsystem
arguments (bz3667)
* ssh(1): fix the multiplexing "channel proxy" mode, broken when
keystroke timing obfuscation was added. (GHPR#463)
* ssh(1), sshd(8): fix spurious configuration parsing errors when
options that accept array arguments are overridden (bz3657).
* ssh-agent(1): fix potential spin in signal handler (bz3670)
* Many fixes to manual pages and other documentation, including
GHPR#462, GHPR#454, GHPR#442 and GHPR#441.
* Greatly improve interop testing against PuTTY.
Portability
* Improve the error message when the autoconf OpenSSL header check
fails (bz#3668)
* Improve detection of broken toolchain -fzero-call-used-regs support
(bz3645).
* Fix regress/misc/fuzz-harness fuzzers and make them compile without
warnings when using clang16
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- If Freifunk München e.V. is entered as a remark it gets converted to
Freifunk München e.V.
- This is because cleanhtml is used on the UTF-8 remark text before saving it to the file
and the HTML::Entities::encode_entities command that is run on that remark text does
not work with UTF-8 text.
- If the UTF-8 text in the remark is decoded before running through the cleanhtml command
then the characters with diacritical marks are correctly shown.
- Have tested out the fix on a remark with a range of different characters with
diacritical marks and all of the ones tested were displayed correctly with the fix while
in the original form they were mangled.
Fixes: Bug#12395
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- This reverts commit 7c6ff5ff12
- That commit removed the cleanhtml command which is not advised, based on feedback from
Michael Tremer from other patch submissions as it creates a potential security problem.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 5.4.6 to 5.6.0
- Update of rootfile
- Changelog
5.6.0 (2024-02-24)
This bumps the minor version of liblzma because new features were
added. The API and ABI are still backward compatible with liblzma
5.4.x and 5.2.x and 5.0.x.
NOTE: As described in the NEWS for 5.5.2beta, the core components
are now under the BSD Zero Clause License (0BSD).
Since 5.5.2beta:
* liblzma:
- Disabled the branchless C variant in the LZMA decoder based
on the benchmark results from the community.
- Disabled x86-64 inline assembly on x32 to fix the build.
* Sandboxing support in xz:
- Landlock is now used even when xz needs to create files.
In this case the sandbox is has to be more permissive than
when no files need to be created. A similar thing was
already in use with pledge(2) since 5.3.4alpha.
- Landlock and pledge(2) are now stricter when reading from
more than one input file and only writing to standard output.
- Added support for Landlock ABI version 4.
* CMake:
- Default to -O2 instead of -O3 with CMAKE_BUILD_TYPE=Release.
-O3 is not useful for speed and makes the code larger.
- Now builds lzmainfo and lzmadec.
- xzdiff, xzgrep, xzless, xzmore, and their symlinks are now
installed. The scripts are also tested during "make test".
- Added translation support for xz, lzmainfo, and the
man pages.
- Applied the symbol versioning workaround for MicroBlaze that
is used in the Autotools build.
- The general XZ Utils and liblzma API documentation is now
installed.
- The CMake component names were changed a little and several
were added. liblzma_Runtime and liblzma_Development are
unchanged.
- Minimum required CMake version is now 3.14. However,
translation support is disabled with CMake versions
older than 3.20.
- The CMake-based build is now close to feature parity with the
Autotools-based build. Most importantly a few tests aren't
run yet. Testing the CMake-based build on different operating
systems would be welcome now. See the comment at the top of
CMakeLists.txt.
* Fixed a bug in the Autotools feature test for ARM64 CRC32
instruction support for old versions of Clang. This did not
affect the CMake build.
* Windows:
- The build instructions in INSTALL and windows/INSTALL*.txt
were revised completely.
- windows/build-with-cmake.bat along with the instructions
in windows/INSTALL-MinGW-w64_with_CMake.txt should make
it very easy to build liblzma.dll and xz.exe on Windows
using CMake and MinGW-w64 with either GCC or Clang/LLVM.
- windows/build.bash was updated. It now works on MSYS2 and
on GNU/Linux (cross-compiling) to create a .zip and .7z
package for 32-bit and 64-bit x86 using GCC + MinGW-w64.
* The TODO file is no longer installed as part of the
documentation. The file is out of date and does not reflect
the actual tasks that will be completed in the future.
* Translations:
- Translated lzmainfo man pages are now installed. These
had been forgotten in earlier versions.
- Updated Croatian, Esperanto, German, Hungarian, Korean,
Polish, Romanian, Spanish, Swedish, Vietnamese, and Ukrainian
translations.
- Updated German, Korean, Romanian, and Ukrainian man page
translations.
* Added a few tests.
Summary of new features added in the 5.5.x development releases:
* liblzma:
- LZMA decoder: Speed optimizations to the C code and
added GCC & Clang compatible inline assembly for x86-64.
- Added lzma_mt_block_size() to recommend a Block size for
multithreaded encoding.
- Added CLMUL-based CRC32 on x86-64 and E2K with runtime
processor detection. Similar to CRC64, on 32-bit x86 it
isn't available unless --disable-assembler is used.
- Optimized the CRC32 calculation on ARM64 platforms using the
CRC32 instructions. Runtime detection for the instruction is
used on GNU/Linux, FreeBSD, Windows, and macOS. If the
compiler flags indicate unconditional CRC32 instruction
support (+crc) then the generic version is not built.
- Added definitions of mask values like
LZMA_INDEX_CHECK_MASK_CRC32 to <lzma/index.h>.
* xz:
- Multithreaded mode is now the default. This improves
compression speed and creates .xz files that can be
decompressed in multithreaded mode. The downsides are
increased memory usage and slightly worse compression ratio.
- Added a new command line option --filters to set the filter
chain using the liblzma filter string syntax.
- Added new command line options --filters1 ... --filters9 to
set additional filter chains using the liblzma filter string
syntax. The --block-list option now allows specifying filter
chains that were set using these new options.
- Ported the command line tools to Windows MSVC.
Visual Studio 2015 or later is required.
* Added lz4 support to xzdiff/xzcmp and xzgrep.
5.5.2beta (2024-02-14)
* Licensing change: The core components are now under the
BSD Zero Clause License (0BSD). In XZ Utils 5.4.6 and older
and 5.5.1alpha these components are in the public domain and
obviously remain so; the change affects the new releases only.
0BSD is an extremely permissive license which doesn't require
retaining or reproducing copyright or license notices when
distributing the code, thus in practice there is extremely
little difference to public domain.
* liblzma
- Significant speed optimizations to the LZMA decoder were
made. There are now three variants that can be chosen at
build time:
* Basic C version: This is a few percent faster than
5.4.x due to some new optimizations.
* Branchless C: This is currently the default on platforms
for which there is no assembly code. This should be a few
percent faster than the basic C version.
* x86-64 inline assembly. This works with GCC and Clang.
The default choice can currently be overridden by setting
LZMA_RANGE_DECODER_CONFIG in CPPFLAGS: 0 means the basic
version and 3 means that branchless C version.
- Optimized the CRC32 calculation on ARM64 platforms using the
CRC32 instructions. The instructions are optional in ARMv8.0
and are required in ARMv8.1 and later. Runtime detection for
the instruction is used on GNU/Linux, FreeBSD, Windows, and
macOS. If the compiler flags indicate unconditional CRC32
instruction support (+crc) then the generic version is not
built.
* Added lz4 support to xzdiff/xzcmp and xzgrep.
* Man pages of xzdiff/xzcmp, xzgrep, and xzmore were rewritten
to simplify licensing of the man page translations.
* Translations:
- Updated Chinese (simplified), German, Korean, Polish,
Romanian, Spanish, Swedish, and Ukrainian translations.
- Updated German, Korean, Romanian, and Ukrainian man page
translations.
* Small improvements to the tests.
* Added doc/examples/11_file_info.c. It was added to the Git
repository in 2017 but forgotten to be added into distribution
tarballs.
* Removed doc/examples_old. These were from 2012.
* Removed the macos/build.sh script. It had not been updated
since 2013.
5.5.1alpha (2024-01-26)
* Added a new filter for RISC-V binaries. The filter can be used
for 32-bit and 64-bit binaries with either little or big
endianness. In liblzma, the Filter ID is LZMA_FILTER_RISCV (0x0B)
and the xz option is --riscv. liblzma filter string syntax
recognizes this filter as "riscv".
* liblzma:
- Added lzma_mt_block_size() to recommend a Block size for
multithreaded encoding
- Added CLMUL-based CRC32 on x86-64 and E2K with runtime
processor detection. Similar to CRC64, on 32-bit x86 it
isn't available unless --disable-assembler is used.
- Implemented GNU indirect function (IFUNC) as a runtime
function dispatching method for CRC32 and CRC64 fast
implementations on x86. Only GNU/Linux (glibc) and FreeBSD
builds will use IFUNC, unless --enable-ifunc is specified to
configure.
- Added definitions of mask values like
LZMA_INDEX_CHECK_MASK_CRC32 to <lzma/index.h>.
- The XZ logo is now included in the Doxygen generated
documentation. It is licensed under Creative Commons
Attribution-ShareAlike 4.0.
* xz:
- Multithreaded mode is now the default. This improves
compression speed and creates .xz files that can be
decompressed multithreaded at the cost of increased memory
usage and slightly worse compression ratio.
- Added new command line option --filters to set the filter
chain using liblzma filter string syntax.
- Added new command line options --filters1 ... --filters9 to
set additional filter chains using liblzma filter string
syntax. The --block-list option now allows specifying filter
chains that were set using these new options.
- Added support for Linux Landlock as a sandboxing method.
- xzdec now supports pledge(2), Capsicum, and Linux Landlock as
sandboxing methods.
- Progress indicator time stats remain accurate after pausing
xz with SIGTSTP.
- Ported xz and xzdec to Windows MSVC. Visual Studio 2015 or
later is required.
* CMake Build:
- Supports pledge(2), Capsicum, and Linux Landlock sandboxing
methods.
- Replacement functions for getopt_long() are used on platforms
that do not have it.
* Enabled unaligned access by default on PowerPC64LE and on RISC-V
targets that define __riscv_misaligned_fast.
* Tests:
- Added two new fuzz targets to OSS-Fuzz.
- Implemented Continuous Integration (CI) testing using
GitHub Actions.
* Changed quoting style from `...' to '...' in all messages,
scripts, and documentation.
* Added basic Codespell support to help catch typo errors.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 5.5.18 to 5.5.21
- Update of rootfile not required
- Changelog
5.5.21
* Updated the .cv and .sd TLD servers.
* Remove 4 new gTLDs which are no longer active.
5.5.20
* Added the .gn TLD server.
* Removed 6 new gTLDs which are no longer active.
* Enabled getopt_long(3) support on Solaris.
5.5.19
* Fixed english support for Japanese queries to not add again the /e
argument if it had already been provided by the user. (Closes: #1050171)
* Added the .ye and .বাংলা (.xn--54b7fta0cc, Bangladesh) TLD servers.
* Updated the .ba, .bb, .dk, .es, .gt, .jo, .ml, .mo, .pa, .pn, .sv,
.uy, .ﺍﻻﺭﺪﻧ (.xn--mgbayh7gpa, Jordan) and .澳門 (.xn--mix891f, Macao)
TLD servers.
* Upgraded the TLD URLs to HTTPS whenever possible.
* Updated the charset for whois.jprs.jp.
* Removed 3 new gTLDs which are no longer active.
* Removed support for the obsolete as32 dot notation.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 11.7.0 to 11.9.0
- Update of rootfile
- Changelog
11.9.0
* Add ENABLE_COVERAGE cmake option to assist with generating
coverage reports.
* From M. Holger: add QPDFObjectHandle::writeJSON to directly
write a JSON representation to a pipeline. This is much faster
than writing the serialized result of getJSON.
* The previous fix to #1056 was incomplete. When setting a check
box value, the previous fix allowed any value other than /Off to
mean checked. Now we also set the actual value based on the
allowable non-/Off value in the normal appearance dictionary.
Fixes#1056.
* Add fuzz testing for JSON.
* Add JSON::getDictItem (from m-holger)
* Allow --overlay and --underlay to be repeated. They may appear
multiple times on the command-line and will be stacked in the
order in which they appear. In QPDFJob JSON, the overlay and
underlay keys may contain arrays. For compatibility, they may also
contain a single dictionary.
* Add new command-line arguments --file and --range which can be
used within --pages in place of positional arguments. Allow --file
to be used inside of --overlay and --underlay as well. These new
options can be freely intermixed with positional arguments. Also
add file(), range(), and password() to QPDFJob::PagesConfig as an
alternative to pageSpec.
11.8.0
* Bug fix: treat references to older generations of objects as
null.
* When recovering a file's xref table, attempt to find xref
streams if a traditional trailer dictionary is not found. Fixes
#1103.
* Add --set-page-labels command-line argument and supporting API.
Fixes#939.
- QPDFJob::Config::setPageLabels
- pdf_page_label_e enumerated type
- QPDFPageLabelDocumentHelper::pageLabelDict
* Support comma-separated numeric values with --collate to select
different group sizes from different files. Fixes#505.
* Support "x" before a group in a numeric range to exclude a group
from the previous group. Details are in the manual. Fixes#564,
#790.
* When flattening annotations, preserve annotations without any
appearance information at all, such as types /Link, /Popup, and
/Projection. Fixes#1039.
* Detect overlong UTF-8 in the UTF-8 decoder, and fix detection of
8-bit characters in erroneous UTF-8 strings.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 0.43.0 to 0.43.4
- Update of rootfile
- Changelog
0.43.4
Revert the changes to fix the problem in big-endian architectures
Allow to build pixman on clang/arm32
pixman-arm: Fix build on clang/arm32
pixman-x86: Use cpuid.h header
pixman-x86: Move #include "cpuid.h" inside conditionals
Revert "Allow to build pixman on clang/arm32"
pixman-arm: Use unified syntax
0.43.2
Note, in the past pixman used a numbering scheme with odd minor number
numbers for development versions and even minor number for stable
versions. This is no longer the case, all releases (including this one)
are stable production versions now.
Drop automatic DEBUG define
Drop ChangeLog
Drop contrib/ci.sh
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.10.0 to 3.11.1
- Update of rootfile
- Changelog
3.11.1
* Fixed wrong API version in lib/pci.h.
* Updated README.Windows.
* Fix compilation on Windows.
3.11.0
* update-pciids now supports XZ compression. If libpci is configured
with support for compression, all downloaded files are recompressed
as gzip. Otherwise they are stored as plain text.
* update-pciids now sends itself as the User-Agent.
* Added a pcilmr utility for PCIe lane margining. Thanks to Nikita
Proshkin for contributing it.
* Re-factored access to i386 ports on all relevant platforms.
* Added i386 port access on OpenBSD.
* Back-ends for Windows received many bug fixes and improvements.
* ECAM back-end now scans ACPI and BIOS memory faster.
* Linux systems without pread/pwrite are no longer supported
as they are hopefully long gone. This helps avoid the tricky check
for presence of pread which was found to fail on musl libc.
* Improved decoding of PCIe control and status registers.
* Decoding of CXL capabilities now supports up to CXL 3.0.
* lspci now displays interrupt message numbers consistently across
different capabilities.
* Cache of IDs resolved via DNS, which was located in ~/.pci-ids
by default, is now stored according to the XDG base directory
specification in $XDG_CACHE_HOME/pci-ids.
* All source files now have SPDX license identifiers.
* Internal: The "aux" fields of structs pci_access and pci_dev
reserved for use by back-ends were renamed to backend_data to better
reflect their meaning.
* As usually, various minor bug fixes and updated pci.ids.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.50.13 to 1.52.0
- Update of rootfile
- Changelog
1.52.0
- Add pango_font_map_reload_font
- Improve formatting of font sizes
1.51.2
- Build improvements on Windows
- Use single fontconfig thread
- Fix problems with spaces at line ends
- Allow custom fonts on Windows
- pango-viewer: Fix hint-metrics options
- Pangofont: Add properties
1.51.0
- itemize: Improve script itemization
- build: Check for cairo DWrite dependency
- win32: Fix various issues and crashes
- layout: Add a missing switch case
1.50.14
- Fix underline thickness in scaled contexts
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 6.2.0 to 6.2.1
- Update of rootfile
- Changelog
2.6.1 Thu February 29 2024
Bug fixes:
#817 Make tests independent of CPU speed, and thus more robust
#828#836 Expose billion laughs API with XML_DTD defined and
XML_GE undefined, regression from 2.6.0
Other changes:
#829 Hide test-only code behind new internal macro
#833 Autotools: Reject expat_config.h.in defining SIZEOF_VOID_P
#819 Address compiler warnings
#832#834 Version info bumped from 10:0:9 (libexpat*.so.1.9.0)
to 10:1:9 (libexpat*.so.1.9.1); see https://verbump.de/
for what these numbers do
Infrastructure:
#818 CI: Adapt to breaking changes in clang-format
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 6.3 to 6.7
- Update of rootfile not required
- Changelog
6.7 - January 29, 2024
* Feature: support for setting TCP data split
* Fix: fix new gcc14 warning
* Fix: fix SFF-8472 transceiver module identification (-m)
* Misc: code cleanup
6.6 - November 23, 2023
* Feature: support for more CMIS transceiver modules (-m)
* Fix: fix build on systems with old kernel uapi headers
6.5 - September 12, 2023
* Feature: register dump for hns3 driver (-d)
* Fix: fix fallback to ioctl for sset (-s)
* Fix: fix empty slot search in rmgr (-N)
6.4 - July 1, 2023
* Feature: get/set Tx push buffer length (-G)
* Feature: sff-8636 and cmis: report LOL / LOS / Tx Fault (-m)
* Fix: fix duplex setting parser (-s)
* Misc: check and require C11 language standard
* Misc: clean up obsolete pre-build checks
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- The update to openssl-3.2.x introduced a bug fix which now gives an error if the
subjectKeyIdentifier (SKID) or authorityKeyIdentifier (AKID) is in the x509 extensions
for a CSR.
- See the following discssion in the openssl github issues
https://github.com/openssl/openssl/issues/22966#issuecomment-1858396738
- The SKID & AKID should never have been specified in the CSR but due to a bug they were
never flagged with an error, just ignored. Since the bug fix for that bug was put into
OpenSSL-3.2.0 the prescence of the SKID & AKID in the CSR causes an error to be flagged.
- The consequence of this is that in CU183 trying to create a new x509 root/host
certificate gives an error when the CSR is generated so only the root certificate is
created and not the host certificate.
- Tested out the removal of the SKID & AKID lines from the [ server ] section of the
ovpn.cnf file and the root/host certificate set was created without any issue.
- Then tested the creation of a RW client connection and that worked with no problems. Also
creating a fresh N2N connection worked without any problems.
- Also tested restoring from an earlier backup. The RW and N2N connections worked without
issues with the AKID and SKID missing from the [ server ] section.
- It would be good if this could be merged into CU184 for final testing.
Fixes: Bug#13595
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
If alsa has not been started on a system the upgrade script fails with
exit code 1 and prevents Pakfire from completing the update.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- This code ensures that all existing N2N connections have no-pass in key 41 in place
of disabled for some of them.
- Tested out and confirmed on my vm testbed.
Fixes: Bug#13548
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- When bug#11408 was fixed it was missed that key 41 has disabled inserted into it when
uploading into the N2N client. This replaced the no-pass entry for all N2N connections
resulting in the ovpnmain.cgi not being able to show the status correctly as the code
looks for pass or no-pass.
- The disabled entry has been present for a very long time and is not utilised anywhere
in the code.
- This fix ensures that key 41 in the uploaded N2N connection has no-pass entered
- Tested out and confirmed in my vm testbed.
Fixes: Bug#13548
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Adds Zabbix Agent userparameters `ipfire.ovpn.clientcert` and `ipfire.ovpn.cacert` for the agent to get details about openvpn client, server and ca certificates.
- Moves all `ipfire.ovpn.*` userparameters to a separate config file `userparameter_ovpn.conf` to enable users to selectively disable openvpn items when not needed
- Includes `ipfire_certificate_detail.sh` script in sudoers for Zabbix Agent as it needs root permission to read openvpn certificate details.
- Adapts lfs install script to install new script and configfile
- Adds new script and configfile to rootfiles
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Add script to parse openssl output on certificates and return it as JSON for consumption by the Zabbix agent.
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 4.14.3 to 4.14.5
- Update of rootfile not required
- Changelog
4.14.5
Build system:
Fix regression introduced in 4.14.4, due to a typo. chgpasswd had
been deleted from a Makefile variable, but it should have been
chpasswd.
4.14.4
Build system:
Link correctly with libdl.
Install pam configs for chpasswd(8) and newusers(8) when using
./configure --with-libpam --disable-account-tools-setuid.
libshadow:
Fix build error (parameter name omitted).
Fix off-by-one bug.
Remove warning.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 4.19.3 to 4.19.5
- Update of rootfile not required
- Changelog
4.19.5
* BUG 13688: Windows 2016 fails to restore previous version of a file from a
shadow_copy2 snapshot.
* BUG 15549: Symlinks on AIX are broken in 4.19 (and a few version before
that).
* BUG 12421: Fake directory create times has no effect.
* BUG 15550: ctime mixed up with mtime by smbd.
* BUG 15548: samba-gpupdate --rsop fails if machine is not in a site.
* BUG 15557: gpupdate: The root cert import when NDES is not available is
broken.
* BUG 15552: samba-gpupdate should print a useful message if cepces-submit
can't be found.
* BUG 15558: samba-gpupdate logging doesn't work.
* BUG 15555: smbpasswd reset permissions only if not 0600.
4.19.4
* BUG 13577: net changesecretpw cannot set the machine account password if
secrets.tdb is empty.
* BUG 15540: For generating doc, take, if defined, env XML_CATALOG_FILES.
* BUG 15541: Trivial C typo in nsswitch/winbind_nss_netbsd.c.
* BUG 15542: vfs_linux_xfs is incorrectly named.
* BUG 15377: systemd stumbled over copyright-message at smbd startup.
* BUG 15505: Following intermediate abolute share-local symlinks is broken.
* BUG 15523: ctdb RELEASE_IP causes a crash in release_ip if a connection to
a non-public address disconnects first.
* BUG 15544: shadow_copy2 broken when current fileset's directories are
removed.
* BUG 15377: systemd stumbled over copyright-message at smbd startup.
* BUG 15523: ctdb RELEASE_IP causes a crash in release_ip if a connection to
a non-public address disconnects first.
* BUG 15534: smbd does not detect ctdb public ipv6 addresses for multichannel
exclusion.
* BUG 15469: 'force user = localunixuser' doesn't work if 'allow trusted
domains = no' is set.
* BUG 15525: smbget debug logging doesn't work.
* BUG 15532: smget: username in the smburl and interactive password entry
doesn't work.
* BUG 15538: smbget auth function doesn't set values for password prompt
correctly.
* BUG 15523: ctdb RELEASE_IP causes a crash in release_ip if a connection to
a non-public address disconnects first.
* BUG 15440: Unable to copy and write files from clients to Ceph cluster via
SMB Linux gateway with Ceph VFS module.
* BUG 15547: Multichannel refresh network information.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.4.61 to 1.4.62
- Update of rootfile not required
- Changelog
1.6.42
Fixed the implementation of the macro function png_check_sig().
This was an API regression, introduced in libpng-1.6.41.
(Reported by Matthieu Darbois)
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.47 to 1.48
- Update of rootfile
- Changelog
1.48
* New configure option --with-libtool-modification. [T6619]
* New option parser flag to detect commands given without a double
dash. There is also the new meta command "command-mode" to set
this flag via a config file. [T6978]
* Added an es_fopen mode flag "sequential" with support on Windows.
[rE7a42ff0ec9]
* Added an es_fopen mode flag "wipe" to cleanup internal buffers at
close time. [T6954]
* New function gpgrt_wipememory. [T6964]
* Improvements to setenv on Windows. [rE89e53ad90f]
* Fixed call to estream-printf string filters. [T6737]
* Many improvements to the yat2m tool.
* Updates to the build system.
* Interface changes relative to the 1.47 release:
ARGPARSE_FLAG_COMMAND NEW.
gpgrt_wipememory NEW.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.4.4 to 3.4.6
- Update of rootfile
- Changelog
3.4.6
Fix long double regression on mips64 and alpha.
3.4.5
Add support for wasm32.
Add support for aarch64 branch target identification (bti).
Add support for ARCv3: ARC32 & ARC64.
Add support for HPPA64, and many HPPA fixes.
Add support for Haikuos on PowerPC.
Fixes for AIX, loongson, MIPS, power, sparc64, and x86 Darwin.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.0.9 to 1.0.10
- Update of rootfile not required
- Changelog
1.0.10
- Fixed problem that caused sgdisk to crash with errors about being unable
to read the disk's partition table when compiled with the latest popt
(commit 740, which is pre-release as I type; presumably version 1.19 and
later once released).
- Updated guid.cc to deal with minor change in libuuid.
- Fixed potential NULL derefernce bug in sgdisk. Thanks to Damian Kurek
for this fix.
- The partition number of "0" can now be used to reference newly-created
partitions when the --largest-new=0 option to sgdisk is used. Thanks to
David Joaquín Shourabi Porcel for this improvement.
- Make explicit casts in gptcurses.cc to eliminate compiler warnings about
mis-matched types in printw() statements.
- Minor code cleanup based on valgrind analysis.
- In previous versions, GPT fdisk accepted only integer values for partition
start points, end points, and sizes, and it interpreted decimal values
incorrectly. That is, if you typed "+9.5G" as the partition end point,
you'd end up with something just 9 sectors in size. This version now
truncates decimal numbers to their integral values, so you'd get a 9 GiB
partition instead.
- Changes to optimize disk handling, particularly on Windows, courtesy of
Frediano Ziglio.
- Added numerous new partition type codes from Discoverable Partitions
Specification
(https://uapi-group.org/specifications/specs/discoverable_partitions_specification/).
- Added new sgdisk -k/--move-backup-table and gdisk k (on the experts' menu)
option to relocate the backup partition table. This is the counterpart of
the sgdisk -j/--move-main-table and gdisk j (on the experts' menu) option
to move the main partition table. This code comes from Niklas Gollenstede.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 2.43.0 to 2.44.0
- Update of rootfile
- Changelog is too large to include here.
See the files 2.43.1.txt, 2.43.2.txt, 2.43.3.txt & 2.44.0.txt in the source tarball in
directory Documentation/RelNotes
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
