For details see:
http://www.unbound.net/download.html
"Features
configure --enable-systemd and lets unbound use systemd sockets if you enable use-systemd:
yes in unbound.conf. Also there are contrib/unbound.socket and contrib/unbound.service:
systemd files for unbound, install them in /usr/lib/systemd/system. Contributed by Sami Kerola
and Pavel Odintsov.
[bugzilla: 1185 ]
Source IP rate limiting, patch from Larissa Feng.
[bugzilla: 1184 ]
Log DNS replies. This includes the same logging information that DNS queries and response
code and response size, patch from Larissa Feng.
Include root trust anchor id 20326 in unbound-anchor.
64bit is default for windows builds.
Bug Fixes
[bugzilla: 1176 ] Fix stack size too small for Alpine Linux.
Fix unbound-control and ipv6 only.
[bugzilla: 1182 ] Fix Resource leak (socket), at startup.
[bugzilla: 1178 ] Fix attempt to fix setup error at end, pop result values at end of install.
iana portlist update
Fix inet_ntop and inet_pton warnings in windows compile.
[bugzilla: 1191 ] Fix remove comment about view deletion.
[bugzilla: 1188 ] Fix unresolved symbol 'fake_dsa' in libunbound.so when built with Nettle
[bugzilla: 1190 ] Fix to not echo back EDNS options in local-zone error response.
[bugzilla: 1194 ] Fix if cross build fails when $host isn't `uname` for getentropy.
Fix reload chdir failure when also chrooted to that directory.
Fix to return formerr for queries for meta-types, to avoid packet amplification if this meta-type
is sent on to upstream.
[bugzilla: 1201 ] Fix missing unlock in answer_from_cache error condition.
[bugzilla: 1202 ] Fix code comment that packed_rrset_data is not always 'packed'.
Fix to also block meta types 128 through to 248 with formerr.
[bugzilla: 1206 ] Fix that some view-related commands are missing from 'unbound-control -h'
Fix to rename ub_callback_t to ub_callback_type, because POSIX reserves _t typedefs.
Fix to rename internally used types from _t to _type, because _t type names are reserved by
POSIX.
Increase MAX_MODULE to 16.
[bugzilla: 1211 ] Fix can't enable interface-automatic if no IPv6 with more helpful error message.
fix root_anchor test for updated icannbundle.pem lower certificates.
Fix compile on solaris of the fix to use $host detect.
Fix for type name change and fix warning on windows compile.
Fix pythonmod for typedef changes.
Fix dnstap for warning of set but not used.
Fix autoconf of systemd check for lack of pkg-config."
Best, Matthias
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Allows CUPS to process input data (e.g. PDF documents and/or images)
and convert them into the correct format to be printed
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This will create IPsec VPN connections with auto=route set
instead of auto=start which will cause the connection being
created, but not brought up yet.
As soon as the first packet is received, the connection will
be established and data will be passed through it.
This allows IPFire to handle more VPN connections on weaker
systems and avoids negotiating many connections which are
rarely used.
Suggested-by: Tom Rymes <tomvend@rymes.com>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Fixes: #10733
For details see:
https://ftp.isc.org/isc/bind9/9.11.0-P3/RELEASE-NOTES-bind-9.11.0-P3.html
"BIND 9.11.0-P3 addresses the security issue described in CVE-2017-3135,
and fixes a regression introduced in a prior security release.
BIND 9.11.0-P2 addresses the security issues described in CVE-2016-9131,
CVE-2016-9147, CVE-2016-9444 and CVE-2016-9778.
BIND 9.11.0-P1 addresses the security issue described in CVE-2016-8864.
...
Security Fixes
If a server is configured with a response policy zone (RPZ) that rewrites an
answer with local data, and is also configured for DNS64 address mapping, a
NULL pointer can be read triggering a server crash. This flaw is disclosed in
CVE-2017-3135. [RT #44434]
A coding error in the nxdomain-redirect feature could lead to an assertion
failure if the redirection namespace was served from a local authoritative
data source such as a local zone or a DLZ instead of via recursive lookup.
This flaw is disclosed in CVE-2016-9778. [RT #43837]
named could mishandle authority sections with missing RRSIGs, triggering an
assertion failure. This flaw is disclosed in CVE-2016-9444. [RT #43632]
named mishandled some responses where covering RRSIG records were returned
without the requested data, resulting in an assertion failure. This flaw is
disclosed in CVE-2016-9147.
[RT #43548]
named incorrectly tried to cache TKEY records which could trigger an assertion
failure when there was a class mismatch. This flaw is disclosed in CVE-2016-9131.
[RT #43522]
It was possible to trigger assertions when processing responses containing answers
of type DNAME. This flaw is disclosed in CVE-2016-8864. [RT #43465]"
Best,
Matthias
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
"On line 2380
'urlfilter configuration' => 'Configurazione filttri per URL'
must be corrected in
'urlfilter configuration' => 'Configurazione filtri per URL'"
Best,
Matthias
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
...and now to something completely different... ;-)
Changelog:
- Bugfix against invalid PRI values (CVE-2014-3634)
CVE-2014-3634:
"...sysklogd 1.5 and earlier allows remote attackers to cause a
denial of service (crash), possibly execute arbitrary code,
or have other unspecified impact via a crafted priority (PRI)
value that triggers an out-of-bounds array access."
Nothing good for a firewall...and besides, 'sysklogd' wasn't updated since 2010.
Best,
Matthias
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Change log:
Tuesday October 25, 2016 mcr@sandelman.ca
Summary for 4.8.1 tcpdump release
Fix "-x" for Apple PKTAP and PPI packets
Use PRIx64 to print a 64-bit number in hex.
Printer for HNCP (RFCs 7787 and 7788).
dagid is always an IPv6 address, not an opaque 128-bit string, and other fixes to RPL printer.
RSVP: Add bounds and length checks
OSPF: Do more bounds checking
Handle OpenSSL 1.1.x.
Initial support for the REdis Serialization Protocol known as RESP.
Add printing function for Generic Protocol Extension for VXLAN
draft-ietf-nvo3-vxlan-gpe-01
Network Service Header: draft-ietf-sfc-nsh-01
Don't recompile the filter if the new file has the same DLT.
Pass an adjusted struct pcap_pkthdr to the sub-printer.
Add three test cases for already fixed CVEs
CVE-2014-8767: OLSR
CVE-2014-8768: Geonet
CVE-2014-8769: AODV
Don't do the DDP-over-UDP heuristic first: GitHub issue #499.
Use the new debugging routines in libpcap.
Harmonize TCP source or destination ports tests with UDP ones
Introduce data types to use for integral values in packet structures.
RSVP: Fix an infinite loop
Support of Type 3 and Type 4 LISP packets.
Don't require IPv6 library support in order to support IPv6 addresses.
Many many changes to support libnetdissect usage.
Add a test that makes unaligned accesses: GitHub issue #478.
add a DNSSEC test case: GH #445 and GH #467.
BGP: add decoding of ADD-PATH capability
fixes to LLC header printing, and RFC948-style IP packets
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Change log:
Tuesday, Oct. 25, 2016 mcr@sandelman.ca
Summary for 1.8.1 libpcap release
Add a target in Makefile.in for Exuberant Ctags use: 'extags'.
Rename configure.in to configure.ac: autoconf 2.59
Clean up the name-to-DLT mapping table.
Add some newer DLT_ values: IPMI_HPM_2,ZWAVE_R1_R2,ZWAVE_R3,WATTSTOPPER_DLM,ISO_14443,RDS
Clarify what the return values are for both success and failure.
Many changes to build on windows
Check for the "break the loop" condition in the inner loop for TPACKET_V3.
Fix handling of packet count in the TPACKET_V3 inner loop: GitHub issue #493.
Filter out duplicate looped back CAN frames.
Fix the handling of loopback filters for IPv6 packets.
Add a link-layer header type for RDS (IEC 62106) groups.
Use different intermediate folders for x86 and x64 builds on Windows.
On Linux, handle all CAN captures with pcap-linux.c, in cooked mode.
Removes the need for the "host-endian" link-layer header type.
Compile with '-Wused-but-marked-unused' in devel mode if supported
Have separate DLTs for big-endian and host-endian SocketCAN headers.
Reflect version.h being renamed to pcap_version.h.
Require that version.h be generated: all build procedures we support generate version.h (autoconf, CMake, MSVC)!
Properly check for sock_recv() errors.
Re-impose some of Winsock's limitations on sock_recv().
Replace sprintf() with pcap_snprintf().
Fix signature of pcap_stats_ex_remote().
Initial cmake support for remote packet capture.
Have rpcap_remoteact_getsock() return a SOCKET and supply an "is active" flag.
Clean up {DAG, Septel, Myricom SNF}-only builds.
Do UTF-16-to-ASCII conversion into the right place.
pcap_create_interface() needs the interface name on Linux.
Clean up hardware time stamp support: the "any" device does not support any time stamp types.
Add support for capturing on FreeBSD usbusN interfaces.
Add a LINKTYPE/DLT_ value for FreeBSD USB.
Go back to using PCAP_API on Windows.
CMake support
Add TurboCap support from WinPcap.
Recognize 802.1ad nested VLAN tag in vlan filter.
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
https://www.openssl.org/news/secadv/20170126.txt
Truncated packet could crash via OOB read (CVE-2017-3731)
=========================================================
Severity: Moderate
If an SSL/TLS server or client is running on a 32-bit host, and a specific
cipher is being used, then a truncated packet can cause that server or client
to perform an out-of-bounds read, usually resulting in a crash.
For OpenSSL 1.1.0, the crash can be triggered when using CHACHA20/POLY1305;
users should upgrade to 1.1.0d
For Openssl 1.0.2, the crash can be triggered when using RC4-MD5; users who have
not disabled that algorithm should update to 1.0.2k
This issue was reported to OpenSSL on 13th November 2016 by Robert Święcki of
Google. The fix was developed by Andy Polyakov of the OpenSSL development team.
Bad (EC)DHE parameters cause a client crash (CVE-2017-3730)
===========================================================
Severity: Moderate
If a malicious server supplies bad parameters for a DHE or ECDHE key exchange
then this can result in the client attempting to dereference a NULL pointer
leading to a client crash. This could be exploited in a Denial of Service
attack.
OpenSSL 1.1.0 users should upgrade to 1.1.0d
This issue does not affect OpenSSL version 1.0.2.
Note that this issue was fixed prior to it being recognised as a security
concern. This means the git commit with the fix does not contain the CVE
identifier. The relevant fix commit can be identified by commit hash efbe126e3.
This issue was reported to OpenSSL on 14th January 2017 by Guido Vranken. The
fix was developed by Matt Caswell of the OpenSSL development team.
BN_mod_exp may produce incorrect results on x86_64 (CVE-2017-3732)
==================================================================
Severity: Moderate
There is a carry propagating bug in the x86_64 Montgomery squaring procedure. No
EC algorithms are affected. Analysis suggests that attacks against RSA and DSA
as a result of this defect would be very difficult to perform and are not
believed likely. Attacks against DH are considered just feasible (although very
difficult) because most of the work necessary to deduce information
about a private key may be performed offline. The amount of resources
required for such an attack would be very significant and likely only
accessible to a limited number of attackers. An attacker would
additionally need online access to an unpatched system using the target
private key in a scenario with persistent DH parameters and a private
key that is shared between multiple clients. For example this can occur by
default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very
similar to CVE-2015-3193 but must be treated as a separate problem.
OpenSSL 1.1.0 users should upgrade to 1.1.0d
OpenSSL 1.0.2 users should upgrade to 1.0.2k
This issue was reported to OpenSSL on 15th January 2017 by the OSS-Fuzz project.
The fix was developed by Andy Polyakov of the OpenSSL development team.
Montgomery multiplication may produce incorrect results (CVE-2016-7055)
=======================================================================
Severity: Low
This issue was previously fixed in 1.1.0c and covered in security advisory
https://www.openssl.org/news/secadv/20161110.txt
OpenSSL 1.0.2 users should upgrade to 1.0.2k
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
