- add help links for two new ipblocklist WebGUI pages
- update help links to proxy accounting
- add links to OpenVPN Net-to-Net Statistics,
MD Raid State, Update Accelerator,
OpenVPN Roadwarrior Connections Log
Signed-off-by: Jon Murphy <jon.murphy@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
When the bridge cannot detect a domain name for any of the leases, it
uses localdomain which is not always the best choice. So instead, this
patches changes the behaviour that we read the default domain of the
firewall.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
For reasons I have not been able to determine, the RTC
module for the Ten64 board (rtc-rx8025) is not automatically
loaded at startup, despite every other relevant modules being
loaded.
modprobe it manually if we are on a Ten64 board.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
The Ten64 board runs a U-Boot which works best directly
booting EFI. Attempting to load your own DTB or other steps
will cause issues.
(see https://ten64doc.traverse.com.au/faq/#common-issues)
The current stable Ten64 firmware unfortunately searches for
boot.scr before bootaa64.efi. So redirect it back to the EFI path.
A future Ten64 firmware package will prefer EFI first before
any boot script avoiding this issue. I will provide a patch
reversing this when that day comes.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
These two patches are needed to support SFP's on NXP DPAA2 platforms
(e.g Traverse Ten64).
The deadlock issue patch was submitted upstream a while ago and
rejected, however I am not aware of any better solutions at present.
The 10G mode additions are part of mainline since 5.16.
These two .patches were sourced from our patchset over here:
https://gitlab.com/traversetech/traverse-kernel-patches/-/tree/lts-5-15/patches
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
This change enables support for NXP's QorIQ/Layerscape platforms,
specifically the Traverse Technologies Ten64 (LS1088A).
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.2.4 plus CVE-2022-29154 patch to 3.2.6
- Patch for CVE-2022-29154 applied in CU170 turned out to have a bug within it causing
rsync to fail with an error. Four additional commits were done to fix this bug and
its consequences but these were all applied in the rsync git repo after the patch had
been merged into CU170.
- Version 3.2.5 onwards contains the CVE-2022-29154 fix and associated commits.
- No update of rootfile required.
- Changelog
NEWS for rsync 3.2.6 (9 Sep 2022)
BUG FIXES:
More path-cleaning improvements in the file-list validation code to avoid
rejecting of valid args.
A file-list validation fix for a --files-from file that ends without a
line-terminating character.
Added a safety check that prevents the sender from removing destination
files when a local copy using --remove-source-files has some files that are
shared between the sending & receiving hierarchies, including the case
where the source dir & destination dir are identical.
Fixed a bug in the internal MD4 checksum code that could cause the digest to
be sporadically incorrect (the openssl version was/is fine).
A minor tweak to rrsync added "copy-devices" to the list of known args, but
left it disabled by default.
ENHANCEMENTS:
Rename --protect-args to --secluded-args to make it clearer how it differs
from the default backslash-escaped arg-protecting behavior of rsync. The
old option names are still accepted. The environment-variable override did
not change its name.
PACKAGING RELATED:
The configure option --with-protected-args was renamed to
--with-secluded-args. This option makes --secluded-args the default rsync
behavior instead of using backslash escaping for protecting args.
The mkgitver script now makes sure that a .git dir/file is in the top-level
source dir before calling git describe. It also runs a basic check on the
version value. This should avoid using an unrelated git description for
rsync's version.
DEVELOPER RELATED:
The configure script no longer sets the -pedantic-errors CFLAG (which it
used to try to do only for gcc).
The name_num_obj struct was modified to allow its dynamic name_num_item list
to be initialized in a better way.
NEWS for rsync 3.2.5 (14 Aug 2022)
SECURITY FIXES:
Added some file-list safety checking that helps to ensure that a rogue
sending rsync can't add unrequested top-level names and/or include
recursive names that should have been excluded by the sender. These extra
safety checks only require the receiver rsync to be updated. When dealing
with an untrusted sending host, it is safest to copy into a dedicated
destination directory for the remote content (i.e. don't copy into a
destination directory that contains files that aren't from the remote host
unless you trust the remote host). Fixes CVE-2022-29154.
A fix for CVE-2022-37434 in the bundled zlib (buffer overflow issue).
BUG FIXES:
Fixed the handling of filenames specified with backslash-quoted wildcards
when the default remote-arg-escaping is enabled.
Fixed the configure check for signed char that was causing a host that
defaults to unsigned characters to generate bogus rolling checksums. This
made rsync send mostly literal data for a copy instead of finding matching
data in the receiver's basis file (for a file that contains high-bit
characters).
Lots of manpage improvements, including an attempt to better describe how
include/exclude filters work.
If rsync is compiled with an xxhash 0.8 library and then moved to a system
with a dynamically linked xxhash 0.7 library, we now detect this and
disable the XX3 hashes (since these routines didn't stabilize until 0.8).
ENHANCEMENTS:
The --trust-sender option was added as a way to bypass the extra file-list
safety checking (should that be required).
PACKAGING RELATED:
A note to those wanting to patch older rsync versions: the changes in this
release requires the quoted argument change from 3.2.4. Then, you'll want
every single code change from 3.2.5 since there is no fluff in this release.
The build date that goes into the manpages is now based on the developer's
release date, not on the build's local-timezone interpretation of the date.
DEVELOPER RELATED:
Configure now defaults GETGROUPS_T to gid_t when cross compiling.
Configure now looks for the bsd/string.h include file in order to fix the
build on a host that has strlcpy() in the main libc but not defined in the
main string.h file.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Since last time we checked, the kernel's security features on ARM have
improved notably (see CONFIG_RANDOMIZE_BASE discussion). This patch
therefore proposes to give the seccomp filter on both 32- and 64-bit ARM
another try, since it provides significant security benefit to
applications using it.
Due to operational constraints, rootfile changes have been omitted, and
will be conducted, should this patch be approved.
Note to future self: Once this patch is approved, applications using
seccomp (OpenSSH, Tor) need to be updated/shipped on ARM.
Fixes: #12366Fixes: #12370
Cc: Arne Fitzenreiter <arne.fitzenreiter@ipfire.org>
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
From the kernels' documentation:
> Uprobes is the user-space counterpart to kprobes: they
> enable instrumentation applications (such as 'perf probe')
> to establish unintrusive probes in user-space binaries and
> libraries, by executing handler functions when the probes
> are hit by user-space applications.
>
> ( These probes come in the form of single-byte breakpoints,
> managed by the kernel and kept transparent to the probed
> application. )
To the best of the authors' understanding, no application on IPFire
needs this functionality, and given its abuse potential, we should
probably not enable it.
As expected, strace functionality is not impaired by this.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Changelog:
"6.0.8 -- 2022-09-27
Task #5552: libhtp 0.5.41
6.0.7 -- 2022-09-27
Security #5430: mqtt: DOS by quadratic with too many transactions in one parse (6.0.x backport)
Bug #5559: BUG_ON triggered from TmThreadsInjectFlowById (6.0.x backport)
Bug #5549: Failed assert DeStateSearchState (6.0.x)
Bug #5548: tcp: assertion failed in DoInsertSegment (BUG_ON) (6.0.x)
Bug #5547: rules: less strict parsing of unexpected flowbit options
Bug #5546: rules: don't error on bad hex in content
Bug #5540: detect: transform strip whitespace creates a 0-sized variable-length array: backport6
Bug #5505: http2: slow http2_frames_get_header_value_vec because of allocation [backport6]
Bug #5471: Reject action is no longer working (6.0.x backport)
Bug #5467: rules: more graceful handling of anomalies for stable versions
Bug #5459: Counters are not initialized in all places. (6.0.x backport)
Bug #5448: nfs: add maximum number of operations per compound (6.0.x backport)
Bug #5436: Infinite loop if the sniffing interface temporarily goes down (6.0.x backports)
Bug #5335: flow: vlan.use-for-tracking is not used for ICMPv4 (6.0.x backport)
Bug #4421: flow manager: using too much CPU during idle (6.0.x backport)
Feature #5535: ips: add "reject" action to exception policies (6.0.x backport)
Feature #5500: ips: midstream: add "exception policy" for midstream (6.0.x backport)
Task #5551: doc: add exception policy documentation (6.0.x)
Task #5533: detect/parse: add tests for parsing signatures with reject and drop action (6.0.x backport)
Task #5525: exceptions: error out when invalid configuration value is passed (6.0.x backport)
Task #5381: add `alert-queue-expand-fails` command-line option (6.0.x backport)
Task #5328: python: distutils deprecation warning (6.0.x backport)"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Since these files are static, there is no legitimate reason why they
should be owned (hence writable) by "nobody". Also, according to
configroot's LFS file, this is the intended behaviour for the *.user
files, which is then overwritten by the backup LFS file. Therefore, set
the file mode of these statically - configroot does not feature other
files in /var/ipfire/backup/ anyway.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 2.4.8 to 2.4.9
- Update of rootfile
- Changelog
Release 2.4.9 Tue September 20 2022
Security fixes:
#629#640 CVE-2022-40674 -- Heap use-after-free vulnerability in
function doContent. Expected impact is denial of service
or potentially arbitrary code execution.
Bug fixes:
#634 MinGW: Fix mis-compilation for -D__USE_MINGW_ANSI_STDIO=0
#614 docs: Fix documentation on effect of switch XML_DTD on
symbol visibility in doc/reference.html
Other changes:
#638 MinGW: Make fix-xmltest-log.sh drop more Wine bug output
#596#625 Autotools: Sync CMake templates with CMake 3.22
#608 CMake: Migrate from use of CMAKE_*_POSTFIX to
dedicated variables EXPAT_*_POSTFIX to stop affecting
other projects
#597#599 Windows|CMake: Add missing -DXML_STATIC to test runners
and fuzzers
#512#621 Windows|CMake: Render .def file from a template to fix
linking with -DEXPAT_DTD=OFF and/or -DEXPAT_ATTR_INFO=ON
#611#621 MinGW|CMake: Apply MSVC .def file when linking
#622#624 MinGW|CMake: Sync library name with GNU Autotools,
i.e. produce libexpat-1.dll rather than libexpat.dll
by default. Filename libexpat.dll.a is unaffected.
#632 MinGW|CMake: Set missing variable CMAKE_RC_COMPILER in
toolchain file "cmake/mingw-toolchain.cmake" to avoid
error "windres: Command not found" on e.g. Ubuntu 20.04
#597#627 CMake: Unify inconsistent use of set() and option() in
context of public build time options to take need for
set(.. FORCE) in projects using Expat by means of
add_subdirectory(..) off Expat's users' shoulders
#626#641 Stop exporting API symbols when building a static library
#644 Resolve use of deprecated "fgrep" by "grep -F"
#620 CMake: Make documentation on variables a bit more consistent
#636 CMake: Drop leading whitespace from a #cmakedefine line in
file expat_config.h.cmake
#594 xmlwf: Fix harmless variable mix-up in function nsattcmp
#592#593#610 Address Cppcheck warnings
#643 Address Clang 15 compiler warnings
#642#644 Version info bumped from 9:8:8 to 9:9:8;
see https://verbump.de/ for what these numbers do
Infrastructure:
#597#598 CI: Windows: Start covering MSVC 2022
#619 CI: macOS: Migrate off deprecated macOS 10.15
#632 CI: Linux: Make migration off deprecated Ubuntu 18.04 work
#643 CI: Upgrade Clang from 14 to 15
#637 apply-clang-format.sh: Add support for BSD find
#633 coverage.sh: Exclude MinGW headers
#635 coverage.sh: Fix name collision for -funsigned-char
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
