- OpenSSL was updated to 3.1.4 in CU181 and to 3.2.1 in CU183 but in both cases freeradius
was not incremented to cause it to be shipped.
- This patch increments the freeradius PAK_VER to ensure it will be shipped.
Fixes: Bug#13590
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- If a fresh install is done then only the DROP_HOSTILE_IN & DROP_HOSTILE_OUT
rrd directories are created.
- With the DROP_HOSTILE directory missing then when the fwhits graph is updated an error
message is caused by the inability to open the required files.
- This patch adds an if/else loop into the fwhits graph code to deal with the two cases
of the DROP_HOSTILE being present or not depending on the history and if a backup with
logs has been restored from when DROP_HOSTILE was in use.
- Tested on vm testbed and created a historical line for the hostile data when it was not
split
- There might be a simpler or better approach than this but it was the only option I
could identify. I couldn't find anything about being able to use if loops within the
RRD::Graph loop
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
In IPFire 2, we don't make any use out of the debug information.
Therefore we can tell the compiler to generate as minimal debug
information as possible in order to have a faster compilation process.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
we had discussed this on december telco but it is not so
easy because our menusystem only shows entry's existing cgi's.
so i add a cgi redirect to http://$ENV{SERVER_ADDR}:3000
this add the entry under pakfire and also to service page.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 6.0.15 to 7.0.2
- Update of rootfile
- suricata 7.0.2 requires libhtp >= 0.5.45
it also requires libelf.so.1 for execution. Previous suricata versions only required
libelf for building. libelf or elfutils are not mentioned anywhere in the changelog
- Without elfutils available during starting then suricata fails to start due to
libelf.so.1 not being available.
- Tested out suricata7 with elfutils on my vm testbed and it successfully started.
- The suricata-5.0.8 patch has been removed as it got applied to configure.ac but this
is not available in suricata-7.0.2. It looks like that patch was never actually used in
suricata as all the builds I checked used the configure file from the source tarball
and the configure was never created by running autoconf on the configure.ac
- Changelog is too large to include here. Details can be found in the ChangeLog file in
the source tarball
Fixes: Bug#13516
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://blog.clamav.net/2023/11/clamav-130-122-105-released.html
Excerpts from changelog:
"Major changes
Added support for extracting and scanning attachments found in
Microsoft OneNote section files. OneNote parsing will be enabled by
default, but may be optionally disabled using one of the following
options:
a. The clamscan command line option: --scan-onenote=no,
b. The clamd.conf config option: ScanOneNote no,
c. The libclamav scan option options.parse &= ~CL_SCAN_PARSE_ONENOTE;,
d. A signature change to the daily.cfg dynamic configuration (DCONF).
Other improvements
Fixed issue when building ClamAV on the Haiku (BeOS-like) operating
system. Patch courtesy of Luca D'Amico
ClamD: When starting, ClamD will now check if the directory specified
by TemporaryDirectory in clamd.conf exists. If it doesn't, ClamD will
print an error message and will exit with exit code 1. Patch courtesy
of Andrew Kiggins.
CMake: If configured to build static libraries, CMake will now also
install the libclamav_rust, libclammspack, libclamunrar_iface, and
libclamunrar static libraries required by libclamav.
Note: These libraries are all linked into the clamscan, clamd, sigtool,
and freshclam programs, which is why they did not need to be installed
to function. However, these libraries would be required if you wish to
build some other program that uses the libclamav static library.
Added file type recognition for compiled Python (`.pyc`) files.
The file type appears as a string parameter for these callback
functions:
- clcb_pre_cache
- clcb_pre_scan
- clcb_file_inspection
When scanning a `.pyc` file, the `type` parameter will now show
"CL_TYPE_PYTHON_COMPILED" instead of "CL_TYPE_BINARY_DATA".
Improved support for decrypting PDFs with empty passwords.
Assorted minor improvements and typo fixes.
Bug fixes
Fixed a warning when scanning some HTML files.
Fixed an issue decrypting some PDF's with an empty password.
ClamOnAcc: Fixed an infinite loop when a watched directory does not
exist.
ClamOnAcc: Fixed an infinite loop when a file has been deleted before a
scan.
Patch courtesy of gsuehiro.
Fixed a possible crash when processing VBA files on HP-UX/IA 64bit.
Patch courtesy of Albert Chin-A-Young.
ClamConf: Fixed an issue printing `MaxScanSize` introduced with the
change to allow a `MaxScanSize` greater than 4 GB.
Fix courtesy of teoberi.
Fixed an issue building a ClamAV RPM in some configurations.
The issue was caused by faulty CMake logic that intended to create an
empty database directory during the installation."
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
If GRUB could not be installed during installation, the installer
continued without reporting the error to the user.
This change will make the installer fail.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 2.5.0 to 2.6.0
- Update of rootfile
- This update fixes two CVE's. Not sure if IPFire would be vulnerable or not but safer
to update anyway.
- Changelog
2.6.0
Security fixes:
#789#814 CVE-2023-52425 -- Fix quadratic runtime issues with big tokens
that can cause denial of service, in partial where
dealing with compressed XML input. Applications
that parsed a document in one go -- a single call to
functions XML_Parse or XML_ParseBuffer -- were not affected.
The smaller the chunks/buffers you use for parsing
previously, the bigger the problem prior to the fix.
Backporters should be careful to no omit parts of
pull request #789 and to include earlier pull request #771,
in order to not break the fix.
#777 CVE-2023-52426 -- Fix billion laughs attacks for users
compiling *without* XML_DTD defined (which is not common).
Users with XML_DTD defined have been protected since
Expat >=2.4.0 (and that was CVE-2013-0340 back then).
Bug fixes:
#753 Fix parse-size-dependent "invalid token" error for
external entities that start with a byte order mark
#780 Fix NULL pointer dereference in setContext via
XML_ExternalEntityParserCreate for compilation with
XML_DTD undefined
#812#813 Protect against closing entities out of order
Other changes:
#723 Improve support for arc4random/arc4random_buf
#771#788 Improve buffer growth in XML_GetBuffer and XML_Parse
#761#770 xmlwf: Support --help and --version
#759#770 xmlwf: Support custom buffer size for XML_GetBuffer and read
#744 xmlwf: Improve language and URL clickability in help output
#673 examples: Add new example "element_declarations.c"
#764 Be stricter about macro XML_CONTEXT_BYTES at build time
#765 Make inclusion to expat_config.h consistent
#726#727 Autotools: configure.ac: Support --disable-maintainer-mode
#678#705 ..
#706#733#792 Autotools: Sync CMake templates with CMake 3.26
#795 Autotools: Make installation of shipped man page doc/xmlwf.1
independent of docbook2man availability
#815 Autotools|CMake: Add missing -DXML_STATIC to pkg-config file
section "Cflags.private" in order to fix compilation
against static libexpat using pkg-config on Windows
#724#751 Autotools|CMake: Require a C99 compiler
(a de-facto requirement already since Expat 2.2.2 of 2017)
#793 Autotools|CMake: Fix PACKAGE_BUGREPORT variable
#750#786 Autotools|CMake: Make test suite require a C++11 compiler
#749 CMake: Require CMake >=3.5.0
#672 CMake: Lowercase off_t and size_t to help a bug in Meson
#746 CMake: Sort xmlwf sources alphabetically
#785 CMake|Windows: Fix generation of DLL file version info
#790 CMake: Build tests/benchmark/benchmark.c as well for
a build with -DEXPAT_BUILD_TESTS=ON
#745#757 docs: Document the importance of isFinal + adjust tests
accordingly
#736 docs: Improve use of "NULL" and "null"
#713 docs: Be specific about version of XML (XML 1.0r4)
and version of C (C99); (XML 1.0r5 will need a sponsor.)
#762 docs: reference.html: Promote function XML_ParseBuffer more
#779 docs: reference.html: Add HTML anchors to XML_* macros
#760 docs: reference.html: Upgrade to OK.css 1.2.0
#763#739 docs: Fix typos
#696 docs|CI: Use HTTPS URLs instead of HTTP at various places
#669#670 ..
#692#703 ..
#733#772 Address compiler warnings
#798#800 Address clang-tidy warnings
#775#776 Version info bumped from 9:10:8 (libexpat*.so.1.8.10)
to 10:0:9 (libexpat*.so.1.9.0); see https://verbump.de/
for what these numbers do
Infrastructure:
#700#701 docs: Document security policy in file SECURITY.md
#766 docs: Improve parse buffer variables in-code documentation
#674#738 ..
#740#747 ..
#748#781#782 Refactor coverage and conformance tests
#714#716 Refactor debug level variables to unsigned long
#671 Improve handling of empty environment variable value
in function getDebugLevel (without visible user effect)
#755#774 ..
#758#783 ..
#784#787 tests: Improve test coverage with regard to parse chunk size
#660#797#801 Fuzzing: Improve fuzzing coverage
#367#799 Fuzzing|CI: Start running OSS-Fuzz fuzzing regression tests
#698#721 CI: Resolve some Travis CI leftovers
#669 CI: Be robust towards absence of Git tags
#693#694 CI: Set permissions to "contents: read" for security
#709 CI: Pin all GitHub Actions to specific commits for security
#739 CI: Reject spelling errors using codespell
#798 CI: Enforce clang-tidy clean code
#773#808 ..
#809#810 CI: Upgrade Clang from 15 to 18
#796 CI: Start using Clang's Control Flow Integrity sanitizer
#675#720#722 CI: Adapt to breaking changes in GitHub Actions Ubuntu images
#689 CI: Adapt to breaking changes in Clang/LLVM Debian packaging
#763 CI: Adapt to breaking changes in codespell
#803 CI: Adapt to breaking changes in Cppcheck
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
There seems to be some problem that this package does not build from
source, but as we don't currently have any hardware that supports thise,
there is no point in debugging it.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is necessary since we now have a much shorter lifetime for the host
certificate. However, it is complicated to do this is which is why we
are copying the previous certificate and generate a new CSR. This is
then signed.
A caveat of this patch is that we do not rollover the key.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The function did not evaluate the return code which is why it used a
hack to figure out if some output is an error or not.
This is being fixed in this commit and the entire output is being
returned if the return code is non-zero.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
