|
|
|
|
@@ -0,0 +1,637 @@
|
|
|
|
|
# Rename this distribution example file to motion.conf
|
|
|
|
|
#
|
|
|
|
|
# This config file was generated by motion 3.2.11
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Daemon
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Start in daemon (background) mode and release terminal (default: off)
|
|
|
|
|
daemon on
|
|
|
|
|
|
|
|
|
|
# File to store the process ID, also called pid file. (default: not defined)
|
|
|
|
|
process_id_file /var/run/motion.pid
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Basic Setup Mode
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Start in Setup-Mode, daemon disabled. (default: off)
|
|
|
|
|
setup_mode off
|
|
|
|
|
|
|
|
|
|
###########################################################
|
|
|
|
|
# Capture device options
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Videodevice to be used for capturing (default /dev/video0)
|
|
|
|
|
# for FreeBSD default is /dev/bktr0
|
|
|
|
|
videodevice /dev/video0
|
|
|
|
|
|
|
|
|
|
# v4l2_palette allows to choose preferable palette to be use by motion
|
|
|
|
|
# to capture from those supported by your videodevice. (default: 8)
|
|
|
|
|
# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
|
|
|
|
|
# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
|
|
|
|
|
# Setting v4l2_palette to 1 forces motion to use V4L2_PIX_FMT_SBGGR8
|
|
|
|
|
# instead.
|
|
|
|
|
#
|
|
|
|
|
# Values :
|
|
|
|
|
# V4L2_PIX_FMT_SN9C10X : 0 'S910'
|
|
|
|
|
# V4L2_PIX_FMT_SBGGR8 : 1 'BA81'
|
|
|
|
|
# V4L2_PIX_FMT_MJPEG : 2 'MJPEG'
|
|
|
|
|
# V4L2_PIX_FMT_JPEG : 3 'JPEG'
|
|
|
|
|
# V4L2_PIX_FMT_RGB24 : 4 'RGB3'
|
|
|
|
|
# V4L2_PIX_FMT_UYVY : 5 'UYVY'
|
|
|
|
|
# V4L2_PIX_FMT_YUYV : 6 'YUYV'
|
|
|
|
|
# V4L2_PIX_FMT_YUV422P : 7 '422P'
|
|
|
|
|
# V4L2_PIX_FMT_YUV420 : 8 'YU12'
|
|
|
|
|
v4l2_palette 8
|
|
|
|
|
|
|
|
|
|
# Tuner device to be used for capturing using tuner as source (default /dev/tuner0)
|
|
|
|
|
# This is ONLY used for FreeBSD. Leave it commented out for Linux
|
|
|
|
|
; tunerdevice /dev/tuner0
|
|
|
|
|
|
|
|
|
|
# The video input to be used (default: 8)
|
|
|
|
|
# Should normally be set to 0 or 1 for video/TV cards, and 8 for USB cameras
|
|
|
|
|
input 8
|
|
|
|
|
|
|
|
|
|
# The video norm to use (only for video capture and TV tuner cards)
|
|
|
|
|
# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
|
|
|
|
|
norm 0
|
|
|
|
|
|
|
|
|
|
# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
|
|
|
|
|
frequency 0
|
|
|
|
|
|
|
|
|
|
# Rotate image this number of degrees. The rotation affects all saved images as
|
|
|
|
|
# well as mpeg movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
|
|
|
|
|
rotate 0
|
|
|
|
|
|
|
|
|
|
# Image width (pixels). Valid range: Camera dependent, default: 352
|
|
|
|
|
width 640
|
|
|
|
|
|
|
|
|
|
# Image height (pixels). Valid range: Camera dependent, default: 288
|
|
|
|
|
height 480
|
|
|
|
|
|
|
|
|
|
# Maximum number of frames to be captured per second.
|
|
|
|
|
# Valid range: 2-100. Default: 100 (almost no limit).
|
|
|
|
|
framerate 2
|
|
|
|
|
|
|
|
|
|
# Minimum time in seconds between capturing picture frames from the camera.
|
|
|
|
|
# Default: 0 = disabled - the capture rate is given by the camera framerate.
|
|
|
|
|
# This option is used when you want to capture images at a rate lower than 2 per second.
|
|
|
|
|
minimum_frame_time 0
|
|
|
|
|
|
|
|
|
|
# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
|
|
|
|
|
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
|
|
|
|
|
; netcam_url value
|
|
|
|
|
|
|
|
|
|
# Username and password for network camera (only if required). Default: not defined
|
|
|
|
|
# Syntax is user:password
|
|
|
|
|
; netcam_userpass value
|
|
|
|
|
|
|
|
|
|
# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
|
|
|
|
|
# 1.0: The historical implementation using HTTP/1.0, closing the socket after each http request.
|
|
|
|
|
# keep_alive: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
|
|
|
|
|
# 1.1: Use HTTP/1.1 requests that support keep alive as default.
|
|
|
|
|
# Default: 1.0
|
|
|
|
|
; netcam_http 1.0
|
|
|
|
|
|
|
|
|
|
# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
|
|
|
|
|
# If a port number other than 80 is needed, use "http://myproxy:1234".
|
|
|
|
|
# Default: not defined
|
|
|
|
|
; netcam_proxy value
|
|
|
|
|
|
|
|
|
|
# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
|
|
|
|
|
# Default: off
|
|
|
|
|
netcam_tolerant_check off
|
|
|
|
|
|
|
|
|
|
# Let motion regulate the brightness of a video device (default: off).
|
|
|
|
|
# The auto_brightness feature uses the brightness option as its target value.
|
|
|
|
|
# If brightness is zero auto_brightness will adjust to average brightness value 128.
|
|
|
|
|
# Only recommended for cameras without auto brightness
|
|
|
|
|
auto_brightness off
|
|
|
|
|
|
|
|
|
|
# Set the initial brightness of a video device.
|
|
|
|
|
# If auto_brightness is enabled, this value defines the average brightness level
|
|
|
|
|
# which Motion will try and adjust to.
|
|
|
|
|
# Valid range 0-255, default 0 = disabled
|
|
|
|
|
brightness 0
|
|
|
|
|
|
|
|
|
|
# Set the contrast of a video device.
|
|
|
|
|
# Valid range 0-255, default 0 = disabled
|
|
|
|
|
contrast 0
|
|
|
|
|
|
|
|
|
|
# Set the saturation of a video device.
|
|
|
|
|
# Valid range 0-255, default 0 = disabled
|
|
|
|
|
saturation 0
|
|
|
|
|
|
|
|
|
|
# Set the hue of a video device (NTSC feature).
|
|
|
|
|
# Valid range 0-255, default 0 = disabled
|
|
|
|
|
hue 0
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Round Robin (multiple inputs on same video device name)
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Number of frames to capture in each roundrobin step (default: 1)
|
|
|
|
|
roundrobin_frames 1
|
|
|
|
|
|
|
|
|
|
# Number of frames to skip before each roundrobin step (default: 1)
|
|
|
|
|
roundrobin_skip 1
|
|
|
|
|
|
|
|
|
|
# Try to filter out noise generated by roundrobin (default: off)
|
|
|
|
|
switchfilter off
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Motion Detection Settings:
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Threshold for number of changed pixels in an image that
|
|
|
|
|
# triggers motion detection (default: 1500)
|
|
|
|
|
threshold 1500
|
|
|
|
|
|
|
|
|
|
# Automatically tune the threshold down if possible (default: off)
|
|
|
|
|
threshold_tune off
|
|
|
|
|
|
|
|
|
|
# Noise threshold for the motion detection (default: 32)
|
|
|
|
|
noise_level 32
|
|
|
|
|
|
|
|
|
|
# Automatically tune the noise threshold (default: on)
|
|
|
|
|
noise_tune on
|
|
|
|
|
|
|
|
|
|
# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
|
|
|
|
|
# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
|
|
|
|
|
# (l)abeling must only be used once and the 'l' must be the last letter.
|
|
|
|
|
# Comment out to disable
|
|
|
|
|
despeckle EedDl
|
|
|
|
|
|
|
|
|
|
# Detect motion in predefined areas (1 - 9). Areas are numbered like that: 1 2 3
|
|
|
|
|
# A script (on_area_detected) is started immediately when motion is 4 5 6
|
|
|
|
|
# detected in one of the given areas, but only once during an event. 7 8 9
|
|
|
|
|
# One or more areas can be specified with this option. (Default: not defined)
|
|
|
|
|
; area_detect value
|
|
|
|
|
|
|
|
|
|
# PGM file to use as a sensitivity mask.
|
|
|
|
|
# Full path name to. (Default: not defined)
|
|
|
|
|
; mask_file value
|
|
|
|
|
|
|
|
|
|
# Dynamically create a mask file during operation (default: 0)
|
|
|
|
|
# Adjust speed of mask changes from 0 (off) to 10 (fast)
|
|
|
|
|
smart_mask_speed 0
|
|
|
|
|
|
|
|
|
|
# Ignore sudden massive light intensity changes given as a percentage of the picture
|
|
|
|
|
# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
|
|
|
|
|
lightswitch 0
|
|
|
|
|
|
|
|
|
|
# Picture frames must contain motion at least the specified number of frames
|
|
|
|
|
# in a row before they are detected as true motion. At the default of 1, all
|
|
|
|
|
# motion is detected. Valid range: 1 to thousands, recommended 1-5
|
|
|
|
|
minimum_motion_frames 1
|
|
|
|
|
|
|
|
|
|
# Specifies the number of pre-captured (buffered) pictures from before motion
|
|
|
|
|
# was detected that will be output at motion detection.
|
|
|
|
|
# Recommended range: 0 to 5 (default: 0)
|
|
|
|
|
# Do not use large values! Large values will cause Motion to skip video frames and
|
|
|
|
|
# cause unsmooth mpegs. To smooth mpegs use larger values of post_capture instead.
|
|
|
|
|
pre_capture 0
|
|
|
|
|
|
|
|
|
|
# Number of frames to capture after motion is no longer detected (default: 0)
|
|
|
|
|
post_capture 0
|
|
|
|
|
|
|
|
|
|
# Gap is the seconds of no motion detection that triggers the end of an event
|
|
|
|
|
# An event is defined as a series of motion images taken within a short timeframe.
|
|
|
|
|
# Recommended value is 60 seconds (Default). The value 0 is allowed and disables
|
|
|
|
|
# events causing all Motion to be written to one single mpeg file and no pre_capture.
|
|
|
|
|
gap 60
|
|
|
|
|
|
|
|
|
|
# Maximum length in seconds of an mpeg movie
|
|
|
|
|
# When value is exceeded a new mpeg file is created. (Default: 0 = infinite)
|
|
|
|
|
max_mpeg_time 0
|
|
|
|
|
|
|
|
|
|
# Always save images even if there was no motion (default: off)
|
|
|
|
|
output_all off
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Image File Output
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Output 'normal' pictures when motion is detected (default: on)
|
|
|
|
|
# Valid values: on, off, first, best, center
|
|
|
|
|
# When set to 'first', only the first picture of an event is saved.
|
|
|
|
|
# Picture with most motion of an event is saved when set to 'best'.
|
|
|
|
|
# Picture with motion nearest center of picture is saved when set to 'center'.
|
|
|
|
|
# Can be used as preview shot for the corresponding movie.
|
|
|
|
|
output_normal off
|
|
|
|
|
|
|
|
|
|
# Output pictures with only the pixels moving object (ghost images) (default: off)
|
|
|
|
|
output_motion off
|
|
|
|
|
|
|
|
|
|
# The quality (in percent) to be used by the jpeg compression (default: 75)
|
|
|
|
|
quality 75
|
|
|
|
|
|
|
|
|
|
# Output ppm images instead of jpeg (default: off)
|
|
|
|
|
ppm off
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# FFMPEG related options
|
|
|
|
|
# Film (mpeg) file output, and deinterlacing of the video input
|
|
|
|
|
# The options movie_filename and timelapse_filename are also used
|
|
|
|
|
# by the ffmpeg feature
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Use ffmpeg to encode mpeg movies in realtime (default: off)
|
|
|
|
|
ffmpeg_cap_new off
|
|
|
|
|
|
|
|
|
|
# Use ffmpeg to make movies with only the pixels moving
|
|
|
|
|
# object (ghost images) (default: off)
|
|
|
|
|
ffmpeg_cap_motion off
|
|
|
|
|
|
|
|
|
|
# Use ffmpeg to encode a timelapse movie
|
|
|
|
|
# Default value 0 = off - else save frame every Nth second
|
|
|
|
|
ffmpeg_timelapse 0
|
|
|
|
|
|
|
|
|
|
# The file rollover mode of the timelapse video
|
|
|
|
|
# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
|
|
|
|
|
ffmpeg_timelapse_mode daily
|
|
|
|
|
|
|
|
|
|
# Bitrate to be used by the ffmpeg encoder (default: 400000)
|
|
|
|
|
# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
|
|
|
|
|
ffmpeg_bps 500000
|
|
|
|
|
|
|
|
|
|
# Enables and defines variable bitrate for the ffmpeg encoder.
|
|
|
|
|
# ffmpeg_bps is ignored if variable bitrate is enabled.
|
|
|
|
|
# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
|
|
|
|
|
# or the range 2 - 31 where 2 means best quality and 31 is worst.
|
|
|
|
|
ffmpeg_variable_bitrate 0
|
|
|
|
|
|
|
|
|
|
# Codec to used by ffmpeg for the video compression.
|
|
|
|
|
# Timelapse mpegs are always made in mpeg1 format independent from this option.
|
|
|
|
|
# Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
|
|
|
|
|
# mpeg1 - gives you files with extension .mpg
|
|
|
|
|
# mpeg4 or msmpeg4 - gives you files with extension .avi
|
|
|
|
|
# msmpeg4 is recommended for use with Windows Media Player because
|
|
|
|
|
# it requires no installation of codec on the Windows client.
|
|
|
|
|
# swf - gives you a flash film with extension .swf
|
|
|
|
|
# flv - gives you a flash video with extension .flv
|
|
|
|
|
# ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
|
|
|
|
|
# mov - QuickTime ( testing )
|
|
|
|
|
ffmpeg_video_codec mpeg4
|
|
|
|
|
|
|
|
|
|
# Use ffmpeg to deinterlace video. Necessary if you use an analog camera
|
|
|
|
|
# and see horizontal combing on moving objects in video or pictures.
|
|
|
|
|
# (default: off)
|
|
|
|
|
ffmpeg_deinterlace off
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Snapshots (Traditional Periodic Webcam File Output)
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Make automated snapshot every N seconds (default: 0 = disabled)
|
|
|
|
|
snapshot_interval 0
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Text Display
|
|
|
|
|
# %Y = year, %m = month, %d = date,
|
|
|
|
|
# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
|
|
|
|
|
# %v = event, %q = frame number, %t = thread (camera) number,
|
|
|
|
|
# %D = changed pixels, %N = noise level, \n = new line,
|
|
|
|
|
# %i and %J = width and height of motion area,
|
|
|
|
|
# %K and %L = X and Y coordinates of motion center
|
|
|
|
|
# %C = value defined by text_event - do not use with text_event!
|
|
|
|
|
# You can put quotation marks around the text to allow
|
|
|
|
|
# leading spaces
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Locate and draw a box around the moving object.
|
|
|
|
|
# Valid values: on, off and preview (default: off)
|
|
|
|
|
# Set to 'preview' will only draw a box in preview_shot pictures.
|
|
|
|
|
locate off
|
|
|
|
|
|
|
|
|
|
# Draws the timestamp using same options as C function strftime(3)
|
|
|
|
|
# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
|
|
|
|
|
# Text is placed in lower right corner
|
|
|
|
|
text_right %Y-%m-%d\n%T-%q
|
|
|
|
|
|
|
|
|
|
# Draw a user defined text on the images using same options as C function strftime(3)
|
|
|
|
|
# Default: Not defined = no text
|
|
|
|
|
# Text is placed in lower left corner
|
|
|
|
|
; text_left CAMERA %t
|
|
|
|
|
|
|
|
|
|
# Draw the number of changed pixed on the images (default: off)
|
|
|
|
|
# Will normally be set to off except when you setup and adjust the motion settings
|
|
|
|
|
# Text is placed in upper right corner
|
|
|
|
|
text_changes off
|
|
|
|
|
|
|
|
|
|
# This option defines the value of the special event conversion specifier %C
|
|
|
|
|
# You can use any conversion specifier in this option except %C. Date and time
|
|
|
|
|
# values are from the timestamp of the first image in the current event.
|
|
|
|
|
# Default: %Y%m%d%H%M%S
|
|
|
|
|
# The idea is that %C can be used filenames and text_left/right for creating
|
|
|
|
|
# a unique identifier for each event.
|
|
|
|
|
text_event %Y%m%d%H%M%S
|
|
|
|
|
|
|
|
|
|
# Draw characters at twice normal size on images. (default: off)
|
|
|
|
|
text_double off
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Target Directories and filenames For Images And Films
|
|
|
|
|
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
|
|
|
|
|
# you can use conversion specifiers
|
|
|
|
|
# %Y = year, %m = month, %d = date,
|
|
|
|
|
# %H = hour, %M = minute, %S = second,
|
|
|
|
|
# %v = event, %q = frame number, %t = thread (camera) number,
|
|
|
|
|
# %D = changed pixels, %N = noise level,
|
|
|
|
|
# %i and %J = width and height of motion area,
|
|
|
|
|
# %K and %L = X and Y coordinates of motion center
|
|
|
|
|
# %C = value defined by text_event
|
|
|
|
|
# Quotation marks round string are allowed.
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Target base directory for pictures and films
|
|
|
|
|
# Recommended to use absolute path. (Default: current working directory)
|
|
|
|
|
target_dir /srv/motion/cam1
|
|
|
|
|
|
|
|
|
|
# File path for snapshots (jpeg or ppm) relative to target_dir
|
|
|
|
|
# Default: %v-%Y%m%d%H%M%S-snapshot
|
|
|
|
|
# Default value is equivalent to legacy oldlayout option
|
|
|
|
|
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
|
|
|
|
|
# File extension .jpg or .ppm is automatically added so do not include this.
|
|
|
|
|
# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
|
|
|
|
|
# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
|
|
|
|
|
snapshot_filename %v-%Y%m%d%H%M%S-snapshot
|
|
|
|
|
|
|
|
|
|
# File path for motion triggered images (jpeg or ppm) relative to target_dir
|
|
|
|
|
# Default: %v-%Y%m%d%H%M%S-%q
|
|
|
|
|
# Default value is equivalent to legacy oldlayout option
|
|
|
|
|
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
|
|
|
|
|
# File extension .jpg or .ppm is automatically added so do not include this
|
|
|
|
|
# Set to 'preview' together with best-preview feature enables special naming
|
|
|
|
|
# convention for preview shots. See motion guide for details
|
|
|
|
|
jpeg_filename %v-%Y%m%d%H%M%S-%q
|
|
|
|
|
|
|
|
|
|
# File path for motion triggered ffmpeg films (mpeg) relative to target_dir
|
|
|
|
|
# Default: %v-%Y%m%d%H%M%S
|
|
|
|
|
# Default value is equivalent to legacy oldlayout option
|
|
|
|
|
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
|
|
|
|
|
# File extension .mpg or .avi is automatically added so do not include this
|
|
|
|
|
# This option was previously called ffmpeg_filename
|
|
|
|
|
movie_filename %v-%Y%m%d%H%M%S
|
|
|
|
|
|
|
|
|
|
# File path for timelapse mpegs relative to target_dir
|
|
|
|
|
# Default: %Y%m%d-timelapse
|
|
|
|
|
# Default value is near equivalent to legacy oldlayout option
|
|
|
|
|
# For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
|
|
|
|
|
# File extension .mpg is automatically added so do not include this
|
|
|
|
|
timelapse_filename %Y%m%d-timelapse
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Live Webcam Server
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# The mini-http server listens to this port for requests (default: 0 = disabled)
|
|
|
|
|
webcam_port 36000
|
|
|
|
|
|
|
|
|
|
# Quality of the jpeg images produced (default: 50)
|
|
|
|
|
webcam_quality 75
|
|
|
|
|
|
|
|
|
|
# Output frames at 1 fps when no motion is detected and increase to the
|
|
|
|
|
# rate given by webcam_maxrate when motion is detected (default: off)
|
|
|
|
|
webcam_motion off
|
|
|
|
|
|
|
|
|
|
# Maximum framerate for webcam streams (default: 1)
|
|
|
|
|
webcam_maxrate 1
|
|
|
|
|
|
|
|
|
|
# Restrict webcam connections to localhost only (default: on)
|
|
|
|
|
webcam_localhost off
|
|
|
|
|
|
|
|
|
|
# Limits the number of images per connection (default: 0 = unlimited)
|
|
|
|
|
# Number can be defined by multiplying actual webcam rate by desired number of seconds
|
|
|
|
|
# Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate
|
|
|
|
|
webcam_limit 0
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# HTTP Based Control
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# TCP/IP port for the http server to listen on (default: 0 = disabled)
|
|
|
|
|
control_port 0
|
|
|
|
|
|
|
|
|
|
# Restrict control connections to localhost only (default: on)
|
|
|
|
|
control_localhost on
|
|
|
|
|
|
|
|
|
|
# Output for http server, select off to choose raw text plain (default: on)
|
|
|
|
|
control_html_output on
|
|
|
|
|
|
|
|
|
|
# Authentication for the http based control. Syntax username:password
|
|
|
|
|
# Default: not defined (Disabled)
|
|
|
|
|
; control_authentication username:password
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Tracking (Pan/Tilt)
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo)
|
|
|
|
|
# The generic type enables the definition of motion center and motion size to
|
|
|
|
|
# be used with the conversion specifiers for options like on_motion_detected
|
|
|
|
|
track_type 0
|
|
|
|
|
|
|
|
|
|
# Enable auto tracking (default: off)
|
|
|
|
|
track_auto off
|
|
|
|
|
|
|
|
|
|
# Serial port of motor (default: none)
|
|
|
|
|
; track_port value
|
|
|
|
|
|
|
|
|
|
# Motor number for x-axis (default: 0)
|
|
|
|
|
track_motorx 0
|
|
|
|
|
|
|
|
|
|
# Motor number for y-axis (default: 0)
|
|
|
|
|
track_motory 0
|
|
|
|
|
|
|
|
|
|
# Maximum value on x-axis (default: 0)
|
|
|
|
|
track_maxx 0
|
|
|
|
|
|
|
|
|
|
# Maximum value on y-axis (default: 0)
|
|
|
|
|
track_maxy 0
|
|
|
|
|
|
|
|
|
|
# ID of an iomojo camera if used (default: 0)
|
|
|
|
|
track_iomojo_id 0
|
|
|
|
|
|
|
|
|
|
# Angle in degrees the camera moves per step on the X-axis
|
|
|
|
|
# with auto-track (default: 10)
|
|
|
|
|
# Currently only used with pwc type cameras
|
|
|
|
|
track_step_angle_x 10
|
|
|
|
|
|
|
|
|
|
# Angle in degrees the camera moves per step on the Y-axis
|
|
|
|
|
# with auto-track (default: 10)
|
|
|
|
|
# Currently only used with pwc type cameras
|
|
|
|
|
track_step_angle_y 10
|
|
|
|
|
|
|
|
|
|
# Delay to wait for after tracking movement as number
|
|
|
|
|
# of picture frames (default: 10)
|
|
|
|
|
track_move_wait 10
|
|
|
|
|
|
|
|
|
|
# Speed to set the motor to (stepper motor option) (default: 255)
|
|
|
|
|
track_speed 255
|
|
|
|
|
|
|
|
|
|
# Number of steps to make (stepper motor option) (default: 40)
|
|
|
|
|
track_stepsize 40
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# External Commands, Warnings and Logging:
|
|
|
|
|
# You can use conversion specifiers for the on_xxxx commands
|
|
|
|
|
# %Y = year, %m = month, %d = date,
|
|
|
|
|
# %H = hour, %M = minute, %S = second,
|
|
|
|
|
# %v = event, %q = frame number, %t = thread (camera) number,
|
|
|
|
|
# %D = changed pixels, %N = noise level,
|
|
|
|
|
# %i and %J = width and height of motion area,
|
|
|
|
|
# %K and %L = X and Y coordinates of motion center
|
|
|
|
|
# %C = value defined by text_event
|
|
|
|
|
# %f = filename with full path
|
|
|
|
|
# %n = number indicating filetype
|
|
|
|
|
# Both %f and %n are only defined for on_picture_save,
|
|
|
|
|
# on_movie_start and on_movie_end
|
|
|
|
|
# Quotation marks round string are allowed.
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Do not sound beeps when detecting motion (default: on)
|
|
|
|
|
# Note: Motion never beeps when running in daemon mode.
|
|
|
|
|
quiet on
|
|
|
|
|
|
|
|
|
|
# Command to be executed when an event starts. (default: none)
|
|
|
|
|
# An event starts at first motion detected after a period of no motion defined by gap
|
|
|
|
|
; on_event_start value
|
|
|
|
|
|
|
|
|
|
# Command to be executed when an event ends after a period of no motion
|
|
|
|
|
# (default: none). The period of no motion is defined by option gap.
|
|
|
|
|
; on_event_end value
|
|
|
|
|
|
|
|
|
|
# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
|
|
|
|
|
# To give the filename as an argument to a command append it with %f
|
|
|
|
|
; on_picture_save value
|
|
|
|
|
|
|
|
|
|
# Command to be executed when a motion frame is detected (default: none)
|
|
|
|
|
; on_motion_detected value
|
|
|
|
|
|
|
|
|
|
# Command to be executed when motion in a predefined area is detected
|
|
|
|
|
# Check option 'area_detect'. (default: none)
|
|
|
|
|
; on_area_detected value
|
|
|
|
|
|
|
|
|
|
# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
|
|
|
|
|
# To give the filename as an argument to a command append it with %f
|
|
|
|
|
; on_movie_start value
|
|
|
|
|
|
|
|
|
|
# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
|
|
|
|
|
# To give the filename as an argument to a command append it with %f
|
|
|
|
|
; on_movie_end value
|
|
|
|
|
|
|
|
|
|
# Command to be executed when a camera can't be opened or if it is lost
|
|
|
|
|
# NOTE: There is situations when motion doesn't detect a lost camera!
|
|
|
|
|
# It depends on the driver, some drivers don't detect a lost camera at all
|
|
|
|
|
# Some hang the motion thread. Some even hang the PC! (default: none)
|
|
|
|
|
; on_camera_lost value
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Common Options For MySQL and PostgreSQL database features.
|
|
|
|
|
# Options require the MySQL/PostgreSQL options to be active also.
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Log to the database when creating motion triggered image file (default: on)
|
|
|
|
|
sql_log_image on
|
|
|
|
|
|
|
|
|
|
# Log to the database when creating a snapshot image file (default: on)
|
|
|
|
|
sql_log_snapshot on
|
|
|
|
|
|
|
|
|
|
# Log to the database when creating motion triggered mpeg file (default: off)
|
|
|
|
|
sql_log_mpeg off
|
|
|
|
|
|
|
|
|
|
# Log to the database when creating timelapse mpeg file (default: off)
|
|
|
|
|
sql_log_timelapse off
|
|
|
|
|
|
|
|
|
|
# SQL query string that is sent to the database
|
|
|
|
|
# Use same conversion specifiers has for text features
|
|
|
|
|
# Additional special conversion specifiers are
|
|
|
|
|
# %n = the number representing the file_type
|
|
|
|
|
# %f = filename with full path
|
|
|
|
|
# Default value:
|
|
|
|
|
# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
|
|
|
|
|
sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Database Options For MySQL
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Mysql database to log to (default: not defined)
|
|
|
|
|
; mysql_db value
|
|
|
|
|
|
|
|
|
|
# The host on which the database is located (default: localhost)
|
|
|
|
|
; mysql_host value
|
|
|
|
|
|
|
|
|
|
# User account name for MySQL database (default: not defined)
|
|
|
|
|
; mysql_user value
|
|
|
|
|
|
|
|
|
|
# User password for MySQL database (default: not defined)
|
|
|
|
|
; mysql_password value
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Database Options For PostgreSQL
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# PostgreSQL database to log to (default: not defined)
|
|
|
|
|
; pgsql_db value
|
|
|
|
|
|
|
|
|
|
# The host on which the database is located (default: localhost)
|
|
|
|
|
; pgsql_host value
|
|
|
|
|
|
|
|
|
|
# User account name for PostgreSQL database (default: not defined)
|
|
|
|
|
; pgsql_user value
|
|
|
|
|
|
|
|
|
|
# User password for PostgreSQL database (default: not defined)
|
|
|
|
|
; pgsql_password value
|
|
|
|
|
|
|
|
|
|
# Port on which the PostgreSQL database is located (default: 5432)
|
|
|
|
|
; pgsql_port 5432
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
############################################################
|
|
|
|
|
# Video Loopback Device (vloopback project)
|
|
|
|
|
############################################################
|
|
|
|
|
|
|
|
|
|
# Output images to a video4linux loopback device
|
|
|
|
|
# The value '-' means next available (default: not defined)
|
|
|
|
|
; video_pipe value
|
|
|
|
|
|
|
|
|
|
# Output motion images to a video4linux loopback device
|
|
|
|
|
# The value '-' means next available (default: not defined)
|
|
|
|
|
; motion_video_pipe value
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
##############################################################
|
|
|
|
|
# Thread config files - One for each camera.
|
|
|
|
|
# Except if only one camera - You only need this config file.
|
|
|
|
|
# If you have more than one camera you MUST define one thread
|
|
|
|
|
# config file for each camera in addition to this config file.
|
|
|
|
|
##############################################################
|
|
|
|
|
|
|
|
|
|
# Remember: If you have more than one camera you must have one
|
|
|
|
|
# thread file for each camera. E.g. 2 cameras requires 3 files:
|
|
|
|
|
# This motion.conf file AND thread1.conf and thread2.conf.
|
|
|
|
|
# Only put the options that are unique to each camera in the
|
|
|
|
|
# thread config files.
|
|
|
|
|
; thread /usr/local/etc/thread1.conf
|
|
|
|
|
; thread /usr/local/etc/thread2.conf
|
|
|
|
|
; thread /usr/local/etc/thread3.conf
|
|
|
|
|
; thread /usr/local/etc/thread4.conf
|
|
|
|
|
|
Jan Paul Tuecking