project:build.sh:optimize the method of determining whether the Ubuntu image is local

sysdrv:Makefile:modify the method of compiling WiFi/BT drivers
sysdrv:drv_ko:wifi:aic8800dc:optimize Bluetooth transmission
sysdrv:tools:board:buildroot:resolve the issue where the USB cannot automatically obtain an IP address
sysdrv:tools:board:luckfox_config:add an optional setting for UART3M1 on the Luckfox Pico Mini
sysdrv:source:kernel:arch:arm:boot:dts:eliminate display noise on the LF40-72720-ARK
sysdrv:source:uboot:rkbin:bin:rv11:resolve the issue of certain SD card models not being recognized

Refactor:sysdrv:Makefile:obtain WiFi/BT drivers from source compilation on the Ubuntu system
Perf:sysdrv:drv_ko:wifi:aic8800dc:expand WiFi/Bluetooth rfkill management methods, increase Bluetooth communication baud rate, and reduce communication lag
Fix:sysdrv:tools:board:buildroot:resolve the issue where the `rkipc` program overwrites the IP address of USB0 when the camera is activated on the Luckfox Pico Ultra
Fix:source:uboot:rkbin:bin:rv11:resolve the issue where, in the presence of an image on SPI NAND, romboot prioritizes using `.bin` from SPI NAND, causing the SD card to be unrecognized

Signed-off-by: luckfox-eng29 <eng29@luckfox.com>

sysdrv/tools/board/android-tools/S99usb0config

@@ -0,0 +1,41 @@
+#!/bin/sh
+
+TARGET_IP="172.32.0.93"
+
+MAX_RETRIES=10
+retries=0
+
+usb0_config() {
+	if [ "$(cat /proc/device-tree/usbdrd/usb@ffb00000/dr_mode)" == "peripheral" ]; then
+		current_ip=$(ifconfig usb0 | grep -o 'inet addr:[^ ]*' | awk -F ':' '{print $2}')
+		echo "current_ip = $current_ip"
+		echo "TARGET_IP = $TARGET_IP"
+
+		while [[ "$current_ip" != "$TARGET_IP" && $retries -lt $MAX_RETRIES ]]; do
+			sleep .5
+			echo "luckfox : set usb0 ip"
+			ifconfig usb0 "$TARGET_IP"
+			current_ip=$(ifconfig usb0 | grep -o 'inet addr:[^ ]*' | awk -F ':' '{print $2}')
+			echo $current_ip
+			retries=$((retries + 1))
+		done
+
+		if [[ "$current_ip" != "$TARGET_IP" ]]; then
+			echo "usb0 config error"
+		else
+			echo "usb0 config success"
+		fi
+	else
+		echo "usb0 is using host mode"
+	fi
+}
+
+case $1 in
+start)
+	usb0_config
+	;;
+stop) ;;
+*)
+	exit 1
+	;;
+esac