mirror of
https://github.com/LuckfoxTECH/luckfox-pico.git
synced 2026-01-18 03:28:19 +01:00
Pullrequest for Luckfox Pico Pi (#246)
* sysdrv/source/kernel/arch/arm/boot/dts : Add Luckfox Pico Pi device tree files Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * sysdrv/source/kernel/arch/arm/configs : Add Add kernel configuration file support for SIM7600G Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * sysdrv/source/kernel/drivers/usb/serial : Add USB serial driver support for SIM7600G Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * project/cfg/BoardConfig_IPC/overlay/overlay-luckfox-config/usr/bin/luckfox-config : Add support for Luckfox Pico Pi and comments Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * project/cfg/BoardConfig_IPC : Add BoardConfig files and post script for Luckfox Pico Pi Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * project/build.sh : Add the lunch menu item of Luckfox Pico Pi Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * project/cfg/BoardConfig_IPC/overlay : Add SIM7600G overlay files Signed-off-by: luckfox-eng29 <eng29@luckfox.com> * sysdrv/source/kernel/drivers/media/i2c/sc3336.c : Set the SC3336 to use the 30fps mode by default Signed-off-by: luckfox-eng29 <eng29@luckfox.com> --------- Signed-off-by: luckfox-eng29 <eng29@luckfox.com>
This commit is contained in:
luckfox-eng29
GitHub
@@ -157,7 +157,9 @@ function choose_target_board() {
|
||||
"RV1106_Luckfox_Pico_Pro"
|
||||
"RV1106_Luckfox_Pico_Max"
|
||||
"RV1106_Luckfox_Pico_Ultra"
|
||||
"RV1106_Luckfox_Pico_Ultra_W")
|
||||
"RV1106_Luckfox_Pico_Ultra_W"
|
||||
"RV1106_Luckfox_Pico_Pi"
|
||||
"RV1106_Luckfox_Pico_Pi_W")
|
||||
local LF_BOOT_MEDIA=("SD_CARD" "SPI_NAND" "EMMC")
|
||||
local LF_SYSTEM=("Buildroot" "Ubuntu" "Custom")
|
||||
local cnt=0 space8=" "
|
||||
@@ -187,6 +189,10 @@ function choose_target_board() {
|
||||
LUNCH_NUM=$((LUNCH_NUM + 1))
|
||||
echo "${space8}${space8}[${LUNCH_NUM}] RV1106_Luckfox_Pico_Ultra_W"
|
||||
LUNCH_NUM=$((LUNCH_NUM + 1))
|
||||
echo "${space8}${space8}[${LUNCH_NUM}] RV1106_Luckfox_Pico_Pi"
|
||||
LUNCH_NUM=$((LUNCH_NUM + 1))
|
||||
echo "${space8}${space8}[${LUNCH_NUM}] RV1106_Luckfox_Pico_Pi_W"
|
||||
LUNCH_NUM=$((LUNCH_NUM + 1))
|
||||
echo "${space8}${space8}[${LUNCH_NUM}] custom"
|
||||
|
||||
read -p "Which would you like? [0~${LUNCH_NUM}][default:0]: " HW_INDEX
|
||||
@@ -271,7 +277,7 @@ function choose_target_board() {
|
||||
|
||||
range_sd_card=(0 1)
|
||||
range_sd_card_spi_nand=(2 3 4 5 6)
|
||||
range_emmc=(7 8)
|
||||
range_emmc=(7 8 9 10)
|
||||
|
||||
if __IS_IN_ARRAY "$HW_INDEX" "${range_sd_card[@]}"; then
|
||||
echo "${space8}${space8}[0] SD_CARD"
|
||||
|
||||
@@ -0,0 +1,124 @@
|
||||
#!/bin/bash
|
||||
|
||||
#################################################
|
||||
# Board Config
|
||||
#################################################
|
||||
export LF_ORIGIN_BOARD_CONFIG=BoardConfig-EMMC-Buildroot-RV1106_Luckfox_Pico_Pi-IPC.mk
|
||||
# Target CHIP
|
||||
export RK_CHIP=rv1106
|
||||
|
||||
# app config
|
||||
export RK_APP_TYPE=RKIPC_RV1106
|
||||
|
||||
# Config CMA size in environment
|
||||
export RK_BOOTARGS_CMA_SIZE="66M"
|
||||
|
||||
# Kernel dts
|
||||
export RK_KERNEL_DTS=rv1106g-luckfox-pico-pi.dts
|
||||
|
||||
#################################################
|
||||
# BOOT_MEDIUM
|
||||
#################################################
|
||||
|
||||
# Target boot medium
|
||||
export RK_BOOT_MEDIUM=emmc
|
||||
|
||||
# Uboot defconfig fragment
|
||||
export RK_UBOOT_DEFCONFIG_FRAGMENT=rk-emmc.config
|
||||
|
||||
# specify post.sh for delete/overlay files
|
||||
# export RK_PRE_BUILD_OEM_SCRIPT=rv1103-spi_nor-post.sh
|
||||
|
||||
# config partition in environment
|
||||
# RK_PARTITION_CMD_IN_ENV format:
|
||||
# <partdef>[,<partdef>]
|
||||
# <partdef> := <size>[@<offset>](part-name)
|
||||
# Note:
|
||||
# If the first partition offset is not 0x0, it must be added. Otherwise, it needn't adding.
|
||||
export RK_PARTITION_CMD_IN_ENV="32K(env),512K@32K(idblock),256K(uboot),32M(boot),512M(oem),256M(userdata),6G(rootfs)"
|
||||
|
||||
# config partition's filesystem type (squashfs is readonly)
|
||||
# emmc: squashfs/ext4
|
||||
# nand: squashfs/ubifs
|
||||
# spi nor: squashfs/jffs2
|
||||
# RK_PARTITION_FS_TYPE_CFG format:
|
||||
# AAAA:/BBBB/CCCC@ext4
|
||||
# AAAA ----------> partition name
|
||||
# /BBBB/CCCC ----> partition mount point
|
||||
# ext4 ----------> partition filesystem type
|
||||
export RK_PARTITION_FS_TYPE_CFG=rootfs@IGNORE@ext4,userdata@/userdata@ext4,oem@/oem@ext4
|
||||
|
||||
# config filesystem compress (Just for squashfs or ubifs)
|
||||
# squashfs: lz4/lzo/lzma/xz/gzip, default xz
|
||||
# ubifs: lzo/zlib, default lzo
|
||||
# export RK_SQUASHFS_COMP=xz
|
||||
# export RK_UBIFS_COMP=lzo
|
||||
|
||||
#################################################
|
||||
# TARGET_ROOTFS
|
||||
#################################################
|
||||
|
||||
# Target rootfs
|
||||
export LF_TARGET_ROOTFS=buildroot
|
||||
|
||||
# Buildroot defconfig
|
||||
export RK_BUILDROOT_DEFCONFIG=luckfox_pico_w_defconfig
|
||||
|
||||
#################################################
|
||||
# Defconfig
|
||||
#################################################
|
||||
|
||||
# Target arch
|
||||
export RK_ARCH=arm
|
||||
|
||||
# Target Toolchain Cross Compile
|
||||
export RK_TOOLCHAIN_CROSS=arm-rockchip830-linux-uclibcgnueabihf
|
||||
|
||||
#misc image
|
||||
export RK_MISC=wipe_all-misc.img
|
||||
|
||||
# Uboot defconfig
|
||||
export RK_UBOOT_DEFCONFIG=luckfox_rv1106_uboot_defconfig
|
||||
|
||||
# Kernel defconfig
|
||||
export RK_KERNEL_DEFCONFIG=luckfox_rv1106_linux_defconfig
|
||||
|
||||
# Kernel defconfig fragment
|
||||
export RK_KERNEL_DEFCONFIG_FRAGMENT="rv1106-bt.config luckfox_rv1106-wwan-ndis-ppp.config"
|
||||
|
||||
# Config sensor IQ files
|
||||
# RK_CAMERA_SENSOR_IQFILES format:
|
||||
# "iqfile1 iqfile2 iqfile3 ..."
|
||||
# ./build.sh media and copy <SDK root dir>/output/out/media_out/isp_iqfiles/$RK_CAMERA_SENSOR_IQFILES
|
||||
export RK_CAMERA_SENSOR_IQFILES="sc4336_OT01_40IRC_F16.json sc3336_CMK-OT2119-PC1_30IRC-F16.json mis5001_CMK-OT2115-PC1_30IRC-F16.json"
|
||||
#export RK_CAMERA_SENSOR_IQFILES="sc4336_OT01_40IRC_F16.json sc3336_CMK-OT2119-PC1_30IRC-F16.json sc530ai_CMK-OT2115-PC1_30IRC-F16.json"
|
||||
|
||||
# Config sensor lens CAC calibrattion bin files
|
||||
export RK_CAMERA_SENSOR_CAC_BIN="CAC_sc4336_OT01_40IRC_F16"
|
||||
#export RK_CAMERA_SENSOR_CAC_BIN="CAC_sc4336_OT01_40IRC_F16 CAC_sc530ai_CMK-OT2115-PC1_30IRC-F16"
|
||||
|
||||
# build ipc web backend
|
||||
#export RK_APP_IPCWEB_BACKEND=y
|
||||
|
||||
# enable install app to oem partition
|
||||
export RK_BUILD_APP_TO_OEM_PARTITION=y
|
||||
|
||||
# enable rockchip test
|
||||
export RK_ENABLE_ROCKCHIP_TEST=y
|
||||
|
||||
# enable rockchip wifi
|
||||
#export RK_ENABLE_WIFI=y
|
||||
|
||||
#################################################
|
||||
# PRE and POST
|
||||
#################################################
|
||||
|
||||
# specify pre.sh for delete/overlay files
|
||||
export RK_PRE_BUILD_OEM_SCRIPT=luckfox-buildroot-oem-pre.sh
|
||||
|
||||
# specify post.sh for delete/overlay files
|
||||
export RK_PRE_BUILD_USERDATA_SCRIPT=luckfox-userdata-pre.sh
|
||||
|
||||
# declare overlay directory
|
||||
export RK_POST_OVERLAY="overlay-luckfox-config overlay-luckfox-buildroot-init overlay-luckfox-buildroot-shadow\
|
||||
overlay-luckfox-ppp overlay-luckfox-buildroot-sim7600g"
|
||||
@@ -0,0 +1,129 @@
|
||||
#!/bin/bash
|
||||
|
||||
#################################################
|
||||
# Board Config
|
||||
#################################################
|
||||
export LF_ORIGIN_BOARD_CONFIG=BoardConfig-EMMC-Buildroot-RV1106_Luckfox_Pico_Pi_W-IPC.mk
|
||||
# Target CHIP
|
||||
export RK_CHIP=rv1106
|
||||
|
||||
# app config
|
||||
export RK_APP_TYPE=RKIPC_RV1106
|
||||
|
||||
# Config CMA size in environment
|
||||
export RK_BOOTARGS_CMA_SIZE="66M"
|
||||
|
||||
# Kernel dts
|
||||
export RK_KERNEL_DTS=rv1106g-luckfox-pico-pi-w.dts
|
||||
|
||||
#################################################
|
||||
# BOOT_MEDIUM
|
||||
#################################################
|
||||
|
||||
# Target boot medium
|
||||
export RK_BOOT_MEDIUM=emmc
|
||||
|
||||
# Uboot defconfig fragment
|
||||
export RK_UBOOT_DEFCONFIG_FRAGMENT=rk-emmc.config
|
||||
|
||||
# specify post.sh for delete/overlay files
|
||||
# export RK_PRE_BUILD_OEM_SCRIPT=rv1103-spi_nor-post.sh
|
||||
|
||||
# config partition in environment
|
||||
# RK_PARTITION_CMD_IN_ENV format:
|
||||
# <partdef>[,<partdef>]
|
||||
# <partdef> := <size>[@<offset>](part-name)
|
||||
# Note:
|
||||
# If the first partition offset is not 0x0, it must be added. Otherwise, it needn't adding.
|
||||
export RK_PARTITION_CMD_IN_ENV="32K(env),512K@32K(idblock),256K(uboot),32M(boot),512M(oem),256M(userdata),6G(rootfs)"
|
||||
|
||||
# config partition's filesystem type (squashfs is readonly)
|
||||
# emmc: squashfs/ext4
|
||||
# nand: squashfs/ubifs
|
||||
# spi nor: squashfs/jffs2
|
||||
# RK_PARTITION_FS_TYPE_CFG format:
|
||||
# AAAA:/BBBB/CCCC@ext4
|
||||
# AAAA ----------> partition name
|
||||
# /BBBB/CCCC ----> partition mount point
|
||||
# ext4 ----------> partition filesystem type
|
||||
export RK_PARTITION_FS_TYPE_CFG=rootfs@IGNORE@ext4,userdata@/userdata@ext4,oem@/oem@ext4
|
||||
|
||||
# config filesystem compress (Just for squashfs or ubifs)
|
||||
# squashfs: lz4/lzo/lzma/xz/gzip, default xz
|
||||
# ubifs: lzo/zlib, default lzo
|
||||
# export RK_SQUASHFS_COMP=xz
|
||||
# export RK_UBIFS_COMP=lzo
|
||||
|
||||
#################################################
|
||||
# TARGET_ROOTFS
|
||||
#################################################
|
||||
|
||||
# Target rootfs
|
||||
export LF_TARGET_ROOTFS=buildroot
|
||||
|
||||
# Buildroot defconfig
|
||||
export RK_BUILDROOT_DEFCONFIG=luckfox_pico_w_defconfig
|
||||
|
||||
#################################################
|
||||
# Defconfig
|
||||
#################################################
|
||||
|
||||
# Target arch
|
||||
export RK_ARCH=arm
|
||||
|
||||
# Target Toolchain Cross Compile
|
||||
export RK_TOOLCHAIN_CROSS=arm-rockchip830-linux-uclibcgnueabihf
|
||||
|
||||
#misc image
|
||||
export RK_MISC=wipe_all-misc.img
|
||||
|
||||
# Uboot defconfig
|
||||
export RK_UBOOT_DEFCONFIG=luckfox_rv1106_uboot_defconfig
|
||||
|
||||
# Kernel defconfig
|
||||
export RK_KERNEL_DEFCONFIG=luckfox_rv1106_linux_defconfig
|
||||
|
||||
# Kernel defconfig fragment
|
||||
export RK_KERNEL_DEFCONFIG_FRAGMENT="rv1106-bt.config luckfox_rv1106-wwan-ndis-ppp.config"
|
||||
|
||||
# Config sensor IQ files
|
||||
# RK_CAMERA_SENSOR_IQFILES format:
|
||||
# "iqfile1 iqfile2 iqfile3 ..."
|
||||
# ./build.sh media and copy <SDK root dir>/output/out/media_out/isp_iqfiles/$RK_CAMERA_SENSOR_IQFILES
|
||||
export RK_CAMERA_SENSOR_IQFILES="sc4336_OT01_40IRC_F16.json sc3336_CMK-OT2119-PC1_30IRC-F16.json mis5001_CMK-OT2115-PC1_30IRC-F16.json"
|
||||
#export RK_CAMERA_SENSOR_IQFILES="sc4336_OT01_40IRC_F16.json sc3336_CMK-OT2119-PC1_30IRC-F16.json sc530ai_CMK-OT2115-PC1_30IRC-F16.json"
|
||||
|
||||
# Config sensor lens CAC calibrattion bin files
|
||||
export RK_CAMERA_SENSOR_CAC_BIN="CAC_sc4336_OT01_40IRC_F16"
|
||||
#export RK_CAMERA_SENSOR_CAC_BIN="CAC_sc4336_OT01_40IRC_F16 CAC_sc530ai_CMK-OT2115-PC1_30IRC-F16"
|
||||
|
||||
# build ipc web backend
|
||||
#export RK_APP_IPCWEB_BACKEND=y
|
||||
|
||||
# enable install app to oem partition
|
||||
export RK_BUILD_APP_TO_OEM_PARTITION=y
|
||||
|
||||
# enable rockchip test
|
||||
export RK_ENABLE_ROCKCHIP_TEST=y
|
||||
|
||||
# enable rockchip wifi
|
||||
export RK_ENABLE_WIFI=y
|
||||
export RK_ENABLE_WIFI_CHIP=AIC8800DC
|
||||
|
||||
# config wifi ssid and passwd
|
||||
export LF_WIFI_SSID="Your wifi ssid"
|
||||
export LF_WIFI_PSK="Your wifi password"
|
||||
|
||||
#################################################
|
||||
# PRE and POST
|
||||
#################################################
|
||||
|
||||
# specify pre.sh for delete/overlay files
|
||||
export RK_PRE_BUILD_OEM_SCRIPT=luckfox-buildroot-oem-pre.sh
|
||||
|
||||
# specify post.sh for delete/overlay files
|
||||
export RK_PRE_BUILD_USERDATA_SCRIPT=luckfox-userdata-pre.sh
|
||||
|
||||
# declare overlay directory
|
||||
export RK_POST_OVERLAY="overlay-luckfox-config overlay-luckfox-buildroot-init overlay-luckfox-buildroot-shadow\
|
||||
overlay-luckfox-ppp overlay-luckfox-buildroot-sim7600g"
|
||||
@@ -0,0 +1,129 @@
|
||||
#!/bin/bash
|
||||
|
||||
#################################################
|
||||
# Board Config
|
||||
#################################################
|
||||
export LF_ORIGIN_BOARD_CONFIG=BoardConfig-EMMC-Ubuntu-RV1106_Luckfox_Pico_Pi-IPC.mk
|
||||
# Target CHIP
|
||||
export RK_CHIP=rv1106
|
||||
|
||||
# app config
|
||||
# export RK_APP_TYPE=RKIPC_RV1106
|
||||
|
||||
# Config CMA size in environment
|
||||
export RK_BOOTARGS_CMA_SIZE="36M"
|
||||
|
||||
# Kernel dts
|
||||
export RK_KERNEL_DTS=rv1106g-luckfox-pico-pi.dts
|
||||
|
||||
#################################################
|
||||
# BOOT_MEDIUM
|
||||
#################################################
|
||||
|
||||
# Target boot medium
|
||||
export RK_BOOT_MEDIUM=emmc
|
||||
|
||||
# Uboot defconfig fragment
|
||||
export RK_UBOOT_DEFCONFIG_FRAGMENT=rk-emmc.config
|
||||
|
||||
# specify post.sh for delete/overlay files
|
||||
# export RK_PRE_BUILD_OEM_SCRIPT=rv1103-spi_nor-post.sh
|
||||
|
||||
# config partition in environment
|
||||
# RK_PARTITION_CMD_IN_ENV format:
|
||||
# <partdef>[,<partdef>]
|
||||
# <partdef> := <size>[@<offset>](part-name)
|
||||
# Note:
|
||||
# If the first partition offset is not 0x0, it must be added. Otherwise, it needn't adding.
|
||||
export RK_PARTITION_CMD_IN_ENV="32K(env),512K@32K(idblock),256K(uboot),32M(boot),512M(oem),256M(userdata),6G(rootfs)"
|
||||
|
||||
# config partition's filesystem type (squashfs is readonly)
|
||||
# emmc: squashfs/ext4
|
||||
# nand: squashfs/ubifs
|
||||
# spi nor: squashfs/jffs2
|
||||
# RK_PARTITION_FS_TYPE_CFG format:
|
||||
# AAAA:/BBBB/CCCC@ext4
|
||||
# AAAA ----------> partition name
|
||||
# /BBBB/CCCC ----> partition mount point
|
||||
# ext4 ----------> partition filesystem type
|
||||
export RK_PARTITION_FS_TYPE_CFG=rootfs@IGNORE@ext4,userdata@/userdata@ext4,oem@/oem@ext4
|
||||
|
||||
# config filesystem compress (Just for squashfs or ubifs)
|
||||
# squashfs: lz4/lzo/lzma/xz/gzip, default xz
|
||||
# ubifs: lzo/zlib, default lzo
|
||||
# export RK_SQUASHFS_COMP=xz
|
||||
# export RK_UBIFS_COMP=lzo
|
||||
|
||||
#################################################
|
||||
# TARGET_ROOTFS
|
||||
#################################################
|
||||
|
||||
# Target rootfs
|
||||
export LF_TARGET_ROOTFS=ubuntu
|
||||
|
||||
# SUBMODULES ： github/gitee
|
||||
export LF_SUBMODULES_BY=github
|
||||
|
||||
# Buildroot defconfig
|
||||
export RK_BUILDROOT_DEFCONFIG=luckfox_pico_w_defconfig
|
||||
|
||||
#################################################
|
||||
# Defconfig
|
||||
#################################################
|
||||
|
||||
# Target arch
|
||||
export RK_ARCH=arm
|
||||
|
||||
# Target Toolchain Cross Compile
|
||||
export RK_TOOLCHAIN_CROSS=arm-rockchip830-linux-uclibcgnueabihf
|
||||
|
||||
#misc image
|
||||
export RK_MISC=wipe_all-misc.img
|
||||
|
||||
# Uboot defconfig
|
||||
export RK_UBOOT_DEFCONFIG=luckfox_rv1106_uboot_defconfig
|
||||
|
||||
# Kernel defconfig
|
||||
export RK_KERNEL_DEFCONFIG=luckfox_rv1106_linux_defconfig
|
||||
|
||||
# Kernel defconfig fragment
|
||||
export RK_KERNEL_DEFCONFIG_FRAGMENT="rv1106-bt.config luckfox_rv1106-wwan-ndis-ppp.config"
|
||||
|
||||
# Config sensor IQ files
|
||||
# RK_CAMERA_SENSOR_IQFILES format:
|
||||
# "iqfile1 iqfile2 iqfile3 ..."
|
||||
# ./build.sh media and copy <SDK root dir>/output/out/media_out/isp_iqfiles/$RK_CAMERA_SENSOR_IQFILES
|
||||
export RK_CAMERA_SENSOR_IQFILES="sc4336_OT01_40IRC_F16.json sc3336_CMK-OT2119-PC1_30IRC-F16.json mis5001_CMK-OT2115-PC1_30IRC-F16.json"
|
||||
#export RK_CAMERA_SENSOR_IQFILES="sc4336_OT01_40IRC_F16.json sc3336_CMK-OT2119-PC1_30IRC-F16.json sc530ai_CMK-OT2115-PC1_30IRC-F16.json"
|
||||
|
||||
# Config sensor lens CAC calibrattion bin files
|
||||
export RK_CAMERA_SENSOR_CAC_BIN="CAC_sc4336_OT01_40IRC_F16"
|
||||
#export RK_CAMERA_SENSOR_CAC_BIN="CAC_sc4336_OT01_40IRC_F16 CAC_sc530ai_CMK-OT2115-PC1_30IRC-F16"
|
||||
|
||||
# build ipc web backend
|
||||
# export RK_APP_IPCWEB_BACKEND=y
|
||||
|
||||
# enable install app to oem partition
|
||||
export RK_BUILD_APP_TO_OEM_PARTITION=y
|
||||
|
||||
# enable rockchip test
|
||||
export RK_ENABLE_ROCKCHIP_TEST=y
|
||||
|
||||
# enable rockchip wifi
|
||||
#export RK_ENABLE_WIFI=y
|
||||
|
||||
#################################################
|
||||
# PRE and POST
|
||||
#################################################
|
||||
|
||||
# specify pre.sh for delete/overlay files
|
||||
export RK_PRE_BUILD_OEM_SCRIPT=luckfox-buildroot-oem-pre.sh
|
||||
|
||||
export RK_PRE_BUILD_USERDATA_SCRIPT=luckfox-userdata-pre.sh
|
||||
|
||||
# specify post.sh for delete/overlay files
|
||||
export RK_POST_BUILD_SCRIPT=luckfox-ubuntu-off-modem-post.sh
|
||||
|
||||
# declare overlay directory
|
||||
export RK_POST_OVERLAY="overlay-luckfox-config overlay-luckfox-ubuntu-config overlay-luckfox-ubuntu-ultra overlay-luckfox-ubuntu-rockchip\
|
||||
overlay-luckfox-ppp overlay-luckfox-ubuntu-sim7600g"
|
||||
@@ -0,0 +1,134 @@
|
||||
#!/bin/bash
|
||||
|
||||
#################################################
|
||||
# Board Config
|
||||
#################################################
|
||||
export LF_ORIGIN_BOARD_CONFIG=BoardConfig-EMMC-Ubuntu-RV1106_Luckfox_Pico_Pi_W-IPC.mk
|
||||
# Target CHIP
|
||||
export RK_CHIP=rv1106
|
||||
|
||||
# app config
|
||||
# export RK_APP_TYPE=RKIPC_RV1106
|
||||
|
||||
# Config CMA size in environment
|
||||
export RK_BOOTARGS_CMA_SIZE="36M"
|
||||
|
||||
# Kernel dts
|
||||
export RK_KERNEL_DTS=rv1106g-luckfox-pico-pi-w.dts
|
||||
|
||||
#################################################
|
||||
# BOOT_MEDIUM
|
||||
#################################################
|
||||
|
||||
# Target boot medium
|
||||
export RK_BOOT_MEDIUM=emmc
|
||||
|
||||
# Uboot defconfig fragment
|
||||
export RK_UBOOT_DEFCONFIG_FRAGMENT=rk-emmc.config
|
||||
|
||||
# specify post.sh for delete/overlay files
|
||||
# export RK_PRE_BUILD_OEM_SCRIPT=rv1103-spi_nor-post.sh
|
||||
|
||||
# config partition in environment
|
||||
# RK_PARTITION_CMD_IN_ENV format:
|
||||
# <partdef>[,<partdef>]
|
||||
# <partdef> := <size>[@<offset>](part-name)
|
||||
# Note:
|
||||
# If the first partition offset is not 0x0, it must be added. Otherwise, it needn't adding.
|
||||
export RK_PARTITION_CMD_IN_ENV="32K(env),512K@32K(idblock),256K(uboot),32M(boot),512M(oem),256M(userdata),6G(rootfs)"
|
||||
|
||||
# config partition's filesystem type (squashfs is readonly)
|
||||
# emmc: squashfs/ext4
|
||||
# nand: squashfs/ubifs
|
||||
# spi nor: squashfs/jffs2
|
||||
# RK_PARTITION_FS_TYPE_CFG format:
|
||||
# AAAA:/BBBB/CCCC@ext4
|
||||
# AAAA ----------> partition name
|
||||
# /BBBB/CCCC ----> partition mount point
|
||||
# ext4 ----------> partition filesystem type
|
||||
export RK_PARTITION_FS_TYPE_CFG=rootfs@IGNORE@ext4,userdata@/userdata@ext4,oem@/oem@ext4
|
||||
|
||||
# config filesystem compress (Just for squashfs or ubifs)
|
||||
# squashfs: lz4/lzo/lzma/xz/gzip, default xz
|
||||
# ubifs: lzo/zlib, default lzo
|
||||
# export RK_SQUASHFS_COMP=xz
|
||||
# export RK_UBIFS_COMP=lzo
|
||||
|
||||
#################################################
|
||||
# TARGET_ROOTFS
|
||||
#################################################
|
||||
|
||||
# Target rootfs
|
||||
export LF_TARGET_ROOTFS=ubuntu
|
||||
|
||||
# SUBMODULES ： github/gitee
|
||||
export LF_SUBMODULES_BY=github
|
||||
|
||||
# Buildroot defconfig
|
||||
export RK_BUILDROOT_DEFCONFIG=luckfox_pico_w_defconfig
|
||||
|
||||
#################################################
|
||||
# Defconfig
|
||||
#################################################
|
||||
|
||||
# Target arch
|
||||
export RK_ARCH=arm
|
||||
|
||||
# Target Toolchain Cross Compile
|
||||
export RK_TOOLCHAIN_CROSS=arm-rockchip830-linux-uclibcgnueabihf
|
||||
|
||||
#misc image
|
||||
export RK_MISC=wipe_all-misc.img
|
||||
|
||||
# Uboot defconfig
|
||||
export RK_UBOOT_DEFCONFIG=luckfox_rv1106_uboot_defconfig
|
||||
|
||||
# Kernel defconfig
|
||||
export RK_KERNEL_DEFCONFIG=luckfox_rv1106_linux_defconfig
|
||||
|
||||
# Kernel defconfig fragment
|
||||
export RK_KERNEL_DEFCONFIG_FRAGMENT="rv1106-bt.config luckfox_rv1106-wwan-ndis-ppp.config"
|
||||
|
||||
# Config sensor IQ files
|
||||
# RK_CAMERA_SENSOR_IQFILES format:
|
||||
# "iqfile1 iqfile2 iqfile3 ..."
|
||||
# ./build.sh media and copy <SDK root dir>/output/out/media_out/isp_iqfiles/$RK_CAMERA_SENSOR_IQFILES
|
||||
export RK_CAMERA_SENSOR_IQFILES="sc4336_OT01_40IRC_F16.json sc3336_CMK-OT2119-PC1_30IRC-F16.json mis5001_CMK-OT2115-PC1_30IRC-F16.json"
|
||||
#export RK_CAMERA_SENSOR_IQFILES="sc4336_OT01_40IRC_F16.json sc3336_CMK-OT2119-PC1_30IRC-F16.json sc530ai_CMK-OT2115-PC1_30IRC-F16.json"
|
||||
|
||||
# Config sensor lens CAC calibrattion bin files
|
||||
export RK_CAMERA_SENSOR_CAC_BIN="CAC_sc4336_OT01_40IRC_F16"
|
||||
#export RK_CAMERA_SENSOR_CAC_BIN="CAC_sc4336_OT01_40IRC_F16 CAC_sc530ai_CMK-OT2115-PC1_30IRC-F16"
|
||||
|
||||
# build ipc web backend
|
||||
# export RK_APP_IPCWEB_BACKEND=y
|
||||
|
||||
# enable install app to oem partition
|
||||
export RK_BUILD_APP_TO_OEM_PARTITION=y
|
||||
|
||||
# enable rockchip test
|
||||
export RK_ENABLE_ROCKCHIP_TEST=y
|
||||
|
||||
# enable rockchip wifi
|
||||
export RK_ENABLE_WIFI=y
|
||||
export RK_ENABLE_WIFI_CHIP=AIC8800DC
|
||||
|
||||
# config wifi ssid and passwd
|
||||
export LF_WIFI_SSID="Your wifi ssid"
|
||||
export LF_WIFI_PSK="Your wifi password"
|
||||
|
||||
#################################################
|
||||
# PRE and POST
|
||||
#################################################
|
||||
|
||||
# specify pre.sh for delete/overlay files
|
||||
export RK_PRE_BUILD_OEM_SCRIPT=luckfox-buildroot-oem-pre.sh
|
||||
|
||||
export RK_PRE_BUILD_USERDATA_SCRIPT=luckfox-userdata-pre.sh
|
||||
|
||||
# specify post.sh for delete/overlay files
|
||||
export RK_POST_BUILD_SCRIPT=luckfox-ubuntu-off-modem-post.sh
|
||||
|
||||
# declare overlay directory
|
||||
export RK_POST_OVERLAY="overlay-luckfox-config overlay-luckfox-ubuntu-config overlay-luckfox-ubuntu-ultra overlay-luckfox-ubuntu-rockchip\
|
||||
overlay-luckfox-ppp overlay-luckfox-ubuntu-sim7600g"
|
||||
36
project/cfg/BoardConfig_IPC/luckfox-ubuntu-off-modem-post.sh
Executable file
36
project/cfg/BoardConfig_IPC/luckfox-ubuntu-off-modem-post.sh
Executable file
@@ -0,0 +1,36 @@
|
||||
#!/bin/bash
|
||||
|
||||
# remove unused files
|
||||
function lf_rm() {
|
||||
for file in "$@"; do
|
||||
if [ -e "$file" ]; then
|
||||
echo "Deleting: $file"
|
||||
rm -rf "$file"
|
||||
#else
|
||||
#echo "File not found: $file"
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
# remove unused links
|
||||
function lf_rm_link() {
|
||||
for link in "$@"; do
|
||||
if [ -L "$link" ]; then
|
||||
echo "Deleting: $link"
|
||||
rm -rf "$link"
|
||||
#else
|
||||
#echo "File not found: $file"
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
# remove ModemManager Service
|
||||
function remove_modem_service() {
|
||||
lf_rm_link $RK_PROJECT_PACKAGE_ROOTFS_DIR/etc/systemd/system/dbus-org.freedesktop.ModemManager1.service
|
||||
lf_rm_link $RK_PROJECT_PACKAGE_ROOTFS_DIR/etc/systemd/system/multi-user.target.wants/ModemManager.service
|
||||
}
|
||||
|
||||
#=========================
|
||||
# run
|
||||
#=========================
|
||||
remove_modem_service
|
||||
Binary file not shown.
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,13 @@
|
||||
ABORT "BUSY"
|
||||
ABORT "NO CARRIER"
|
||||
ABORT "NO DIALTONE"
|
||||
ABORT "ERROR"
|
||||
ABORT "NO ANSWER"
|
||||
TIMEOUT 30
|
||||
"" AT
|
||||
OK ATE0
|
||||
OK ATI;+CSUB;+CSQ;+CPIN?;+COPS?;+CGREG?;&D2
|
||||
# Insert the APN provided by your network operator, default apn is 3gnet
|
||||
OK AT+CGDCONT=1,"IP","ctnet",,0,0
|
||||
OK ATD*99#
|
||||
CONNECT
|
||||
@@ -0,0 +1,8 @@
|
||||
ABORT "ERROR"
|
||||
ABORT "NO DIALTONE"
|
||||
SAY "\nSending break to the modem\n"
|
||||
"" +++
|
||||
"" +++
|
||||
"" +++
|
||||
SAY "\nGoodbay\n"
|
||||
|
||||
@@ -0,0 +1,35 @@
|
||||
/dev/ttyUSB2 115200
|
||||
user "test" password "test"
|
||||
# The chat script, customize your APN in this file
|
||||
connect 'chat -s -v -f /etc/ppp/peers/simcom-connect-chat'
|
||||
# The close script
|
||||
disconnect 'chat -s -v -f /etc/ppp/peers/simcom-disconnect-chat'
|
||||
# Hide password in debug messages
|
||||
hide-password
|
||||
# The phone is not required to authenticate
|
||||
noauth
|
||||
# Debug info from pppd
|
||||
debug
|
||||
# If you want to use the HSDPA link as your gateway
|
||||
defaultroute
|
||||
# pppd must not propose any IP address to the peer
|
||||
noipdefault
|
||||
# No ppp compression
|
||||
novj
|
||||
novjccomp
|
||||
noccp
|
||||
ipcp-accept-local
|
||||
ipcp-accept-remote
|
||||
local
|
||||
# For sanity, keep a lock on the serial line
|
||||
lock
|
||||
modem
|
||||
dump
|
||||
nodetach
|
||||
# Hardware flow control
|
||||
nocrtscts
|
||||
remotename 3gppp
|
||||
ipparam 3gppp
|
||||
ipcp-max-failure 30
|
||||
# Ask the peer for up to 2 DNS server addresses
|
||||
usepeerdns
|
||||
Binary file not shown.
Binary file not shown.
410
sysdrv/source/kernel/arch/arm/boot/dts/rv1106-luckfox-pico-pi-ipc.dtsi
Executable file
410
sysdrv/source/kernel/arch/arm/boot/dts/rv1106-luckfox-pico-pi-ipc.dtsi
Executable file
@@ -0,0 +1,410 @@
|
||||
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
#include "rv1106-evb.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/display/media-bus-format.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "earlycon=uart8250,mmio32,0xff4c0000 console=ttyFIQ0 root=/dev/mmcblk0p7 rootwait snd_soc_core.prealloc_buffer_size_kbytes=16 coherent_pool=0";
|
||||
};
|
||||
|
||||
reserved_memory: reserved-memory {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
mmc_ecsd: mmc@3f000 {
|
||||
reg = <0x3f000 0x00001000>;
|
||||
};
|
||||
};
|
||||
|
||||
acodec_sound: acodec-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "rv1106-acodec";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&acodec>;
|
||||
};
|
||||
};
|
||||
|
||||
dsm_sound: dsm-sound {
|
||||
status = "disabled";
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "rockchip,dsm-sound";
|
||||
simple-audio-card,bitclock-master = <&sndcodec>;
|
||||
simple-audio-card,frame-master = <&sndcodec>;
|
||||
sndcpu: simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
};
|
||||
sndcodec: simple-audio-card,codec {
|
||||
sound-dai = <&dsm>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: vcc-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vcc_3v3: vcc-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vdd_arm: vdd-arm {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
work_led: work{
|
||||
gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "activity";
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/***************************** audio ********************************/
|
||||
&i2s0_8ch {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&acodec {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/************************* FIQ_DUBUGGER ****************************/
|
||||
&fiq_debugger {
|
||||
rockchip,irq-mode-enable = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/***************************** USB *********************************/
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3 {
|
||||
extcon = <&u2phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/***************************** DSM *********************************/
|
||||
&dsm {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
/*************************** CSI *********************************/
|
||||
&csi2_dphy_hw {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&csi2_dphy0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
csi_dphy_input0: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&sc3336_out>;
|
||||
data-lanes = <1 2>;
|
||||
};
|
||||
|
||||
csi_dphy_input1: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&mis5001_out>;
|
||||
data-lanes = <1 2>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
csi_dphy_output: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&mipi_csi2_input>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default";
|
||||
//pinctrl-0 = <&i2c4m2_xfer>;
|
||||
|
||||
sc3336: sc3336@30 {
|
||||
compatible = "smartsens,sc3336";
|
||||
status = "okay";
|
||||
reg = <0x30>;
|
||||
clocks = <&cru MCLK_REF_MIPI0>;
|
||||
clock-names = "xvclk";
|
||||
reset-gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mipi_refclk_out0>;
|
||||
rockchip,camera-module-index = <0>;
|
||||
rockchip,camera-module-facing = "back";
|
||||
rockchip,camera-module-name = "CMK-OT2119-PC1";
|
||||
rockchip,camera-module-lens-name = "30IRC-F16";
|
||||
port {
|
||||
sc3336_out: endpoint {
|
||||
remote-endpoint = <&csi_dphy_input0>;
|
||||
data-lanes = <1 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mis5001: mis5001@31 {
|
||||
compatible = "imagedesign,mis5001";
|
||||
status = "okay";
|
||||
reg = <0x31>;
|
||||
clocks = <&cru MCLK_REF_MIPI0>;
|
||||
clock-names = "xvclk";
|
||||
reset-gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mipi_refclk_out0>;
|
||||
rockchip,camera-module-index = <0>;
|
||||
rockchip,camera-module-facing = "back";
|
||||
rockchip,camera-module-name = "CMK-OT2115-PC1";
|
||||
rockchip,camera-module-lens-name = "30IRC-F16";
|
||||
port {
|
||||
mis5001_out: endpoint {
|
||||
remote-endpoint = <&csi_dphy_input1>;
|
||||
data-lanes = <1 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mipi0_csi2 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi_csi2_input: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csi_dphy_output>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi_csi2_output: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&cif_mipi_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rkcif {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkcif_mipi_lvds {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mipi_pins>;
|
||||
port {
|
||||
/* MIPI CSI-2 endpoint */
|
||||
cif_mipi_in: endpoint {
|
||||
remote-endpoint = <&mipi_csi2_output>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rkcif_mipi_lvds_sditf {
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
/* MIPI CSI-2 endpoint */
|
||||
mipi_lvds_sditf: endpoint {
|
||||
remote-endpoint = <&isp_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rkisp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkisp_vir0 {
|
||||
status = "okay";
|
||||
|
||||
port@0 {
|
||||
isp_in: endpoint {
|
||||
remote-endpoint = <&mipi_lvds_sditf>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/***************************** ADC ********************************/
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**************************** PINCTRL ******************************/
|
||||
// SPI
|
||||
&spi0 {
|
||||
pinctrl-0 = <&spi0m0_clk &spi0m0_miso &spi0m0_mosi &spi0m0_cs0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spidev@0 {
|
||||
compatible = "rockchip,spidev";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
// I2C
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1m1_xfer>;
|
||||
};
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2m0_xfer>;
|
||||
};
|
||||
&i2c3 {
|
||||
pinctrl-0 = <&i2c3m0_xfer &i2c3m1_xfer &i2c3m2_xfer>;
|
||||
};
|
||||
&i2c4 {
|
||||
pinctrl-0 = <&i2c4m0_xfer &i2c4m1_xfer &i2c4m2_xfer>;
|
||||
};
|
||||
|
||||
// UART
|
||||
&uart0 {
|
||||
pinctrl-0 = <&uart0m0_xfer &uart0m1_xfer>;
|
||||
};
|
||||
&uart1 {
|
||||
pinctrl-0 = <&uart1m1_xfer>;
|
||||
};
|
||||
&uart3 {
|
||||
|
||||
pinctrl-0 = <&uart3m0_xfer &uart3m1_xfer>;
|
||||
};
|
||||
&uart4 {
|
||||
pinctrl-0 = <&uart4m0_xfer &uart4m1_xfer>;
|
||||
};
|
||||
&uart5 {
|
||||
pinctrl-0 = <&uart5m1_xfer>;
|
||||
};
|
||||
|
||||
// PWM
|
||||
&pwm0 {
|
||||
pinctrl-0 = <&pwm0m1_pins>;
|
||||
};
|
||||
&pwm1 {
|
||||
pinctrl-0 = <&pwm1m1_pins &pwm1m2_pins>;
|
||||
};
|
||||
&pwm2 {
|
||||
pinctrl-0 = <&pwm2m0_pins &pwm2m1_pins &pwm2m2_pins>;
|
||||
};
|
||||
&pwm3 {
|
||||
pinctrl-0 = <&pwm3m1_pins &pwm3m2_pins>;
|
||||
};
|
||||
&pwm4 {
|
||||
pinctrl-0 = <&pwm4m0_pins &pwm4m1_pins &pwm4m2_pins>;
|
||||
};
|
||||
&pwm5 {
|
||||
pinctrl-0 = <&pwm5m1_pins &pwm5m2_pins>;
|
||||
};
|
||||
&pwm6 {
|
||||
pinctrl-0 = <&pwm6m1_pins &pwm6m2_pins>;
|
||||
};
|
||||
&pwm7 {
|
||||
pinctrl-0 = <&pwm7m0_pins &pwm7m1_pins>;
|
||||
};
|
||||
&pwm8 {
|
||||
pinctrl-0 = <&pwm8m1_pins>;
|
||||
};
|
||||
&pwm9 {
|
||||
pinctrl-0 = <&pwm9m1_pins>;
|
||||
};
|
||||
&pwm10 {
|
||||
pinctrl-0 = <&pwm10m1_pins &pwm10m2_pins>;
|
||||
};
|
||||
&pwm11 {
|
||||
pinctrl-0 = <&pwm11m1_pins &pwm11m2_pins>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
spi0 {
|
||||
spi0m0_clk: spi0m0-clk {
|
||||
rockchip,pins = <1 RK_PC1 4 &pcfg_pull_none>;
|
||||
};
|
||||
spi0m0_mosi: spi0m0-mosi {
|
||||
rockchip,pins = <1 RK_PC2 6 &pcfg_pull_none>;
|
||||
};
|
||||
spi0m0_miso: spi0m0-miso {
|
||||
rockchip,pins = <1 RK_PC3 6 &pcfg_pull_none>;
|
||||
};
|
||||
spi0m0_cs0: spi0m0-cs0 {
|
||||
rockchip,pins = <1 RK_PC0 4 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
161
sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-pi-w.dts
Executable file
161
sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-pi-w.dts
Executable file
@@ -0,0 +1,161 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rv1106.dtsi"
|
||||
#include "rv1106-luckfox-pico-pi-ipc.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/display/media-bus-format.h>
|
||||
|
||||
/ {
|
||||
model = "Luckfox Pico Pi W";
|
||||
compatible = "rockchip,rv1103g-38x38-ipc-v10", "rockchip,rv1106g3";
|
||||
|
||||
restart-poweroff {
|
||||
compatible = "restart-poweroff";
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wireless_bluetooth: wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart1m0_rtsn>;
|
||||
pinctrl-1 = <&uart1_gpios>;
|
||||
BT,wake_gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
/**********CRU**********/
|
||||
//&cru {
|
||||
// assigned-clocks =
|
||||
// <&cru PLL_GPLL>, <&cru PLL_CPLL>,
|
||||
// <&cru ARMCLK>,
|
||||
// <&cru ACLK_PERI_ROOT>, <&cru HCLK_PERI_ROOT>,
|
||||
// <&cru PCLK_PERI_ROOT>, <&cru ACLK_BUS_ROOT>,
|
||||
// <&cru PCLK_TOP_ROOT>, <&cru PCLK_PMU_ROOT>,
|
||||
// <&cru HCLK_PMU_ROOT>, <&cru CLK_500M_SRC>;
|
||||
// assigned-clock-rates =
|
||||
// <1188000000>, <700000000>,
|
||||
// <1104000000>,
|
||||
// <400000000>, <200000000>,
|
||||
// <100000000>, <300000000>,
|
||||
// <100000000>, <100000000>,
|
||||
// <200000000>, <700000000>;
|
||||
//};
|
||||
|
||||
/**********NPU**********/
|
||||
//&npu {
|
||||
// assigned-clock-rates = <700000000>;
|
||||
//};
|
||||
|
||||
/**********EMMC**********/
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
non-removable;
|
||||
// mmc-hs200-1_8v;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
memory-region-ecsd = <&mmc_ecsd>;
|
||||
post-power-on-delay-ms = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fiq_debugger {
|
||||
rockchip,irq-mode-enable = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********SDIO-WIFI**********/
|
||||
&sdmmc {
|
||||
max-frequency = <50000000>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
// no-sd;
|
||||
// no-mmc;
|
||||
supports-sdio;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl{
|
||||
sdmmc0{
|
||||
sdmmc0_det: sdmmc0-det {
|
||||
rockchip,pins =
|
||||
/* sdmmc0_det */
|
||||
<3 RK_PA1 1 &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/**********SD-CARD*********/
|
||||
&sdio {
|
||||
max-frequency = <50000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
supports-sd;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1m0_cmd &sdmmc1m0_clk &sdmmc1m0_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********ETH**********/
|
||||
&gmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********USB**********/
|
||||
&usbdrd_dwc3 {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
//dr_mode = "host";
|
||||
};
|
||||
|
||||
/**********RTC**********/
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********BT**********/
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
wireless-bluetooth {
|
||||
uart1_gpios: uart1-gpios {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/**********SPI**********/
|
||||
&spi0 {
|
||||
status = "disabled";
|
||||
spidev@0 {
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
102
sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-pi.dts
Executable file
102
sysdrv/source/kernel/arch/arm/boot/dts/rv1106g-luckfox-pico-pi.dts
Executable file
@@ -0,0 +1,102 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rv1106.dtsi"
|
||||
#include "rv1106-luckfox-pico-pi-ipc.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/display/media-bus-format.h>
|
||||
|
||||
/ {
|
||||
model = "Luckfox Pico Pi";
|
||||
compatible = "rockchip,rv1103g-38x38-ipc-v10", "rockchip,rv1106g3";
|
||||
|
||||
restart-poweroff {
|
||||
compatible = "restart-poweroff";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
/**********CRU**********/
|
||||
//&cru {
|
||||
// assigned-clocks =
|
||||
// <&cru PLL_GPLL>, <&cru PLL_CPLL>,
|
||||
// <&cru ARMCLK>,
|
||||
// <&cru ACLK_PERI_ROOT>, <&cru HCLK_PERI_ROOT>,
|
||||
// <&cru PCLK_PERI_ROOT>, <&cru ACLK_BUS_ROOT>,
|
||||
// <&cru PCLK_TOP_ROOT>, <&cru PCLK_PMU_ROOT>,
|
||||
// <&cru HCLK_PMU_ROOT>, <&cru CLK_500M_SRC>;
|
||||
// assigned-clock-rates =
|
||||
// <1188000000>, <700000000>,
|
||||
// <1104000000>,
|
||||
// <400000000>, <200000000>,
|
||||
// <100000000>, <300000000>,
|
||||
// <100000000>, <100000000>,
|
||||
// <200000000>, <700000000>;
|
||||
//};
|
||||
|
||||
/**********NPU**********/
|
||||
//&npu {
|
||||
// assigned-clock-rates = <700000000>;
|
||||
//};
|
||||
|
||||
/**********EMMC**********/
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
non-removable;
|
||||
// mmc-hs200-1_8v;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
memory-region-ecsd = <&mmc_ecsd>;
|
||||
post-power-on-delay-ms = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fiq_debugger {
|
||||
rockchip,irq-mode-enable = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********SD_CARD**********/
|
||||
&sdio {
|
||||
max-frequency = <50000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
supports-sd;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1m0_cmd &sdmmc1m0_clk &sdmmc1m0_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********ETH**********/
|
||||
&gmac {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********USB**********/
|
||||
&usbdrd_dwc3 {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
//dr_mode = "host";
|
||||
};
|
||||
|
||||
/**********RTC**********/
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/**********SPI**********/
|
||||
&spi0 {
|
||||
status = "disabled";
|
||||
spidev@0 {
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
16
sysdrv/source/kernel/arch/arm/configs/luckfox_rv1106-wwan-ndis-ppp.config
Executable file
16
sysdrv/source/kernel/arch/arm/configs/luckfox_rv1106-wwan-ndis-ppp.config
Executable file
@@ -0,0 +1,16 @@
|
||||
CONFIG_USB_NET_DRIVERS=y
|
||||
CONFIG_PPP=y
|
||||
CONFIG_PPP_BSDCOMP=y
|
||||
CONFIG_PPP_DEFLATE=y
|
||||
CONFIG_PPP_FILTER=y
|
||||
CONFIG_PPP_MULTILINK=y
|
||||
CONFIG_PPP_ASYNC=y
|
||||
CONFIG_PPP_SYNC_TTY=y
|
||||
CONFIG_USB_USBNET=y
|
||||
CONFIG_USB_NET_RNDIS_HOST=y
|
||||
CONFIG_USB_NET_QMI_WWAN=y
|
||||
CONFIG_USB_WDM=y
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIALIPW=y
|
||||
CONFIG_USB_SERIAL_OPTION=y
|
||||
CONFIG_USB_SERIAL_QUALCOMM=y
|
||||
@@ -461,23 +461,6 @@ static const struct regval sc3336_linear_10_2304x1296_30fps_regs[] = {
|
||||
};
|
||||
|
||||
static const struct sc3336_mode supported_modes[] = {
|
||||
{
|
||||
.width = 2304,
|
||||
.height = 1296,
|
||||
.max_fps = {
|
||||
.numerator = 10000,
|
||||
.denominator = 250000,
|
||||
},
|
||||
.exp_def = 0x0080,
|
||||
.hts_def = 0x05dc,
|
||||
.vts_def = 0x0654,
|
||||
.bus_fmt = MEDIA_BUS_FMT_SBGGR10_1X10,
|
||||
.reg_list = sc3336_linear_10_2304x1296_25fps_regs,
|
||||
.hdr_mode = NO_HDR,
|
||||
.xvclk_freq = 27000000,
|
||||
.link_freq_idx = 0,
|
||||
.vc[PAD0] = V4L2_MBUS_CSI2_CHANNEL_0,
|
||||
},
|
||||
{
|
||||
.width = 2304,
|
||||
.height = 1296,
|
||||
@@ -494,6 +477,23 @@ static const struct sc3336_mode supported_modes[] = {
|
||||
.xvclk_freq = 24000000,
|
||||
.link_freq_idx = 1,
|
||||
.vc[PAD0] = V4L2_MBUS_CSI2_CHANNEL_0,
|
||||
},
|
||||
{
|
||||
.width = 2304,
|
||||
.height = 1296,
|
||||
.max_fps = {
|
||||
.numerator = 10000,
|
||||
.denominator = 250000,
|
||||
},
|
||||
.exp_def = 0x0080,
|
||||
.hts_def = 0x05dc,
|
||||
.vts_def = 0x0654,
|
||||
.bus_fmt = MEDIA_BUS_FMT_SBGGR10_1X10,
|
||||
.reg_list = sc3336_linear_10_2304x1296_25fps_regs,
|
||||
.hdr_mode = NO_HDR,
|
||||
.xvclk_freq = 27000000,
|
||||
.link_freq_idx = 0,
|
||||
.vc[PAD0] = V4L2_MBUS_CSI2_CHANNEL_0,
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
@@ -606,6 +606,10 @@ static void option_instat_callback(struct urb *urb);
|
||||
|
||||
|
||||
static const struct usb_device_id option_ids[] = {
|
||||
#if 1 /* Added by Simcom */
|
||||
{ USB_DEVICE(0x05c6, 0x90DB) },
|
||||
{ USB_DEVICE(0x1e0e, 0x9001) },
|
||||
#endif
|
||||
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
|
||||
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
|
||||
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
|
||||
@@ -2229,6 +2233,9 @@ static struct usb_serial_driver option_1port_device = {
|
||||
#ifdef CONFIG_PM
|
||||
.suspend = usb_wwan_suspend,
|
||||
.resume = usb_wwan_resume,
|
||||
#if 1 /* Added by Simcom */
|
||||
.reset_resume = usb_wwan_resume,
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
||||
@@ -2253,6 +2260,16 @@ static int option_probe(struct usb_serial *serial,
|
||||
&serial->interface->cur_altsetting->desc;
|
||||
unsigned long device_flags = id->driver_info;
|
||||
|
||||
#if 1 /* Added by Simcom */
|
||||
if (serial->dev->descriptor.idVendor == cpu_to_le16(0x05C6) && serial->dev->descriptor.idProduct == cpu_to_le16(0x90DB)
|
||||
&& serial->interface->cur_altsetting->desc.bInterfaceNumber >= 2)
|
||||
return -ENODEV;
|
||||
|
||||
if (serial->dev->descriptor.idVendor == cpu_to_le16(0x1E0E) && serial->dev->descriptor.idProduct == cpu_to_le16(0x9001)
|
||||
&& serial->interface->cur_altsetting->desc.bInterfaceNumber >=5)
|
||||
return -ENODEV;
|
||||
#endif
|
||||
|
||||
/* Never bind to the CD-Rom emulation interface */
|
||||
if (iface_desc->bInterfaceClass == USB_CLASS_MASS_STORAGE)
|
||||
return -ENODEV;
|
||||
|
||||
@@ -481,6 +481,13 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
|
||||
if (intfdata->use_zlp && dir == USB_DIR_OUT)
|
||||
urb->transfer_flags |= URB_ZERO_PACKET;
|
||||
|
||||
#if 1 /* Added by Simcom for Zero Packet */
|
||||
if (dir == USB_DIR_OUT) {
|
||||
if (serial->dev->descriptor.idVendor == cpu_to_le16(0x1E0E))
|
||||
urb->transfer_flags |= URB_ZERO_PACKET;
|
||||
}
|
||||
#endif
|
||||
|
||||
return urb;
|
||||
}
|
||||
|
||||
|
||||
Reference in New Issue
Block a user