diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/dreamplug-setup.c linux-2.6.32.45/arch/arm/mach-kirkwood/dreamplug-setup.c --- linux-2.6.32.45.org/arch/arm/mach-kirkwood/dreamplug-setup.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.32.45/arch/arm/mach-kirkwood/dreamplug-setup.c 2011-10-11 15:35:37.000000000 +0200 @@ -0,0 +1,140 @@ +/* + * arch/arm/mach-kirkwood/dreamplug-setup.c + * + * Marvell DreamPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static const struct flash_platform_data dreamplug_spi_slave_data = { + .type = "mx25l1606e", +}; + +static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &dreamplug_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct mv643xx_eth_platform_data dreamplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data dreamplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data dreamplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data dreamplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led dreamplug_led_pins[] = { + { + .name = "dreamplug:blue:bluetooth", + .gpio = 47, + .active_low = 1, + }, + { + .name = "dreamplug:green:wlan", + .gpio = 48, + .active_low = 1, + }, + { + .name = "dreamplug:blue:wlanap", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dreamplug_led_data = { + .leds = dreamplug_led_pins, + .num_leds = ARRAY_SIZE(dreamplug_led_pins), +}; + +static struct platform_device dreamplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dreamplug_led_data, + } +}; + +static unsigned int dreamplug_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_GPIO, + MPP5_GPO, + MPP7_GPO, + MPP18_GPO, + MPP19_GPO, + MPP47_GPIO, /* B_BLED */ + MPP48_GPIO, /* W_GLED */ + MPP49_GPIO, /* W_BLED */ + 0 +}; + +static void __init dreamplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(dreamplug_mpp_config); + + kirkwood_uart0_init(); + + spi_register_board_info(dreamplug_spi_slave_info, + ARRAY_SIZE(dreamplug_spi_slave_info)); + + kirkwood_spi_init(); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&dreamplug_ge00_data); + kirkwood_ge01_init(&dreamplug_ge01_data); + kirkwood_sata_init(&dreamplug_sata_data); + kirkwood_sdio_init(&dreamplug_mvsdio_data); + + platform_device_register(&dreamplug_leds); +} + +MACHINE_START(DREAMPLUG, "Marvell DreamPlug Reference Board") + /* Maintainer: Siddarth Gore marvell.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = dreamplug_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/guruplug-setup.c linux-2.6.32.45/arch/arm/mach-kirkwood/guruplug-setup.c --- linux-2.6.32.45.org/arch/arm/mach-kirkwood/guruplug-setup.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.32.45/arch/arm/mach-kirkwood/guruplug-setup.c 2011-10-11 15:35:37.000000000 +0200 @@ -0,0 +1,131 @@ +/* + * arch/arm/mach-kirkwood/guruplug-setup.c + * + * Marvell GuruPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mtd_partition guruplug_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data guruplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data guruplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data guruplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data guruplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led guruplug_led_pins[] = { + { + .name = "guruplug:red:health", + .gpio = 46, + .active_low = 1, + }, + { + .name = "guruplug:green:health", + .gpio = 47, + .active_low = 1, + }, + { + .name = "guruplug:red:wmode", + .gpio = 48, + .active_low = 1, + }, + { + .name = "guruplug:green:wmode", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data guruplug_led_data = { + .leds = guruplug_led_pins, + .num_leds = ARRAY_SIZE(guruplug_led_pins), +}; + +static struct platform_device guruplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &guruplug_led_data, + } +}; + +static unsigned int guruplug_mpp_config[] __initdata = { + MPP46_GPIO, /* M_RLED */ + MPP47_GPIO, /* M_GLED */ + MPP48_GPIO, /* B_RLED */ + MPP49_GPIO, /* B_GLED */ + 0 +}; + +static void __init guruplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(guruplug_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&guruplug_ge00_data); + kirkwood_ge01_init(&guruplug_ge01_data); + kirkwood_sata_init(&guruplug_sata_data); + kirkwood_sdio_init(&guruplug_mvsdio_data); + + platform_device_register(&guruplug_leds); +} + +MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") + /* Maintainer: Siddarth Gore */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = guruplug_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/Kconfig linux-2.6.32.45/arch/arm/mach-kirkwood/Kconfig --- linux-2.6.32.45.org/arch/arm/mach-kirkwood/Kconfig 2011-08-16 03:57:37.000000000 +0200 +++ linux-2.6.32.45/arch/arm/mach-kirkwood/Kconfig 2011-10-15 17:06:55.816070291 +0200 @@ -32,6 +32,18 @@ Say 'Y' here if you want your kernel to support the Marvell SheevaPlug Reference Board. +config MACH_DREAMPLUG + bool "Marvell DreamPlug Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell DreamPlug Reference Board. + +config MACH_GURUPLUG + bool "Marvell GuruPlug Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board. + config MACH_TS219 bool "QNAP TS-119 and TS-219 Turbo NAS" help @@ -44,6 +56,12 @@ Say 'Y' here if you want your kernel to support the Marvell OpenRD Base Board. +config MACH_NAS6210 + bool "RaidSonic ICY BOX IB-NAS62x0" + help + Say 'Y' here if you want your kernel to support the + RaidSonic ICY BOX IB-NAS62x0 device. + endmenu endif diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/Makefile linux-2.6.32.45/arch/arm/mach-kirkwood/Makefile --- linux-2.6.32.45.org/arch/arm/mach-kirkwood/Makefile 2011-08-16 03:57:37.000000000 +0200 +++ linux-2.6.32.45/arch/arm/mach-kirkwood/Makefile 2011-10-15 17:07:16.346068829 +0200 @@ -5,7 +5,10 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o +obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o +obj-$(CONFIG_MACH_DREAMPLUG) += dreamplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o +obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/nas6210-setup.c linux-2.6.32.45/arch/arm/mach-kirkwood/nas6210-setup.c --- linux-2.6.32.45.org/arch/arm/mach-kirkwood/nas6210-setup.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.32.45/arch/arm/mach-kirkwood/nas6210-setup.c 2011-10-16 09:57:35.268409525 +0200 @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-kirkwood/nas6210-setup.c + * + * Raidsonic ICYBOX NAS6210 and 6220 Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +#define NAS6210_GPIO_POWER_OFF 24 + +static struct mtd_partition nas6210_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = (SZ_1M*6) + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data nas6210_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv_sata_platform_data nas6210_sata_data = { + .n_ports = 2, +}; + +static struct gpio_led nas6210_led_pins[] = { + { + .name = "nas6210:green:power", + .default_trigger = "default-on", + .gpio = 25, + .active_low = 0, + }, + { + .name = "nas6210:red:power", + .default_trigger = "none", + .gpio = 22, + .active_low = 0, + }, + { + .name = "nas6210:red:usb_copy", + .default_trigger = "none", + .gpio = 27, + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data nas6210_led_data = { + .leds = nas6210_led_pins, + .num_leds = ARRAY_SIZE(nas6210_led_pins), +}; + +static struct platform_device nas6210_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &nas6210_led_data, + } +}; + +static struct gpio_keys_button nas6210_buttons[] = { + { + .code = KEY_COPY, + .gpio = 29, + .desc = "USB Copy", + .active_low = 1, + }, + { + .code = KEY_RESTART, + .gpio = 28, + .desc = "Reset", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data nas6210_button_data = { + .buttons = nas6210_buttons, + .nbuttons = ARRAY_SIZE(nas6210_buttons), +}; + +static struct platform_device nas6210_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &nas6210_button_data, + } +}; + +static unsigned int nas6210_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP22_GPIO, /* Power LED red */ + MPP24_GPIO, /* Power off */ + MPP25_GPIO, /* Power LED green */ + MPP27_GPIO, /* USB transfer LED */ + MPP28_GPIO, /* Reset button */ + MPP29_GPIO, /* USB Copy button */ + 0 +}; + +void nas6210_power_off(void) +{ + gpio_set_value(NAS6210_GPIO_POWER_OFF, 1); + while(1); +} + +static void __init nas6210_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(nas6210_mpp_config); + + kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25); + kirkwood_ehci_init(); + kirkwood_ge00_init(&nas6210_ge00_data); + kirkwood_sata_init(&nas6210_sata_data); + kirkwood_uart0_init(); + platform_device_register(&nas6210_leds); + platform_device_register(&nas6210_button_device); + + if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0) + pm_power_off = nas6210_power_off; + + else + pr_err("nas6210: failed to configure power-off gpio pin"); +} + +static int __init nas6210_pci_init(void) +{ + if (machine_is_nas6210()) { + kirkwood_pcie_init(); + } + return 0; +} +subsys_initcall(nas6210_pci_init); + +MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS62x0") + /* Maintainer: Arne Fitzenreiter */ + .boot_params = 0x00000100, + .init_machine = nas6210_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff -Naur linux-2.6.32.45.org/arch/arm/tools/mach-types linux-2.6.32.45/arch/arm/tools/mach-types --- linux-2.6.32.45.org/arch/arm/tools/mach-types 2011-08-16 03:57:37.000000000 +0200 +++ linux-2.6.32.45/arch/arm/tools/mach-types 2011-10-15 17:05:46.486069811 +0200 @@ -2536,3 +2536,6 @@ mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 esyx MACH_ESYX ESYX 2551 bulldog MACH_BULLDOG BULLDOG 2553 +guruplug MACH_GURUPLUG GURUPLUG 2601 +dreamplug MACH_DREAMPLUG DREAMPLUG 2659 +nas6210 MACH_NAS6210 NAS6210 3104