Since OpenVPN-2.4.x do not accepts 1024 bit DH-parameter for security concerns anymore,
it has been removed from the menu.
Signed-off-by: Erik Kapfer <erik.kapfer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Fix for #11766 .
Since the new OpenSSL output differs in the 'Subject' section, the regex needed to be adapted.
Old and new output should now be possible.
Signed-off-by: Erik Kapfer <erik.kapfer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Since OpenSSL 1.1.0x it is required to set a value for the 'valid til (days)' field.
The WUI delivers now a guide value of two years.
Signed-off-by: Erik Kapfer <erik.kapfer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Check has been integrated that the OpenSSL maximum of '999999' valid days can not be exceeded.
Check for needed entry in 'Valid til days' field has been integrated.
Asterisk for 'Valid til days' field has been set to mark it as required field.
Signed-off-by: Erik Kapfer <erik.kapfer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This allows to create an IPsec connection that will never actively
try to reach the other peer. It helps in environments where this is
not desired or impossible because of NAT.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This makes debugging easier, especially when it comes to
GeoIP related firewall rules and database related issues
such as #11482.
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Fix some minor cosmetic issues on remote.cgi as well as a typo in
the language files ("sesstions" -> "sessions"). The changes are
listed in "filelists" for Core Update 121.
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
When creating firewallrules or using firewall groups,
it should be possible to select a single IpSec subnet if there is more than one.
This patch adds the changes to the firewall groups.
Signed-off-by: Alexander Marx <alexander.marx@ipfire.org>
Tested-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
When creating firewallrules or using firewall groups,
it should be possible to select a single IpSec subnet if there is more than one.
This patch has the changes for firewall.cgi
Signed-off-by: Alexander Marx <alexander.marx@ipfire.org>
Tested-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Display active user logins (both local and remote) at
the remote.cgi page in the WebUI. This might be useful
for debugging broken SSH sessions or simply checking that
nobody is currently logged in. :-)
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
When renaming a GeoIP Group, the corresponding names in
firewallrules (if any) are not changed accordingly. Now
when changing a GeoIP Group the firewallrules are renamed
correctly.
Slightly improved first version of this patch (contained
a blank line with trailing whitespace). No functionality
changed, patch has been confirmed as working correctly.
Fixes: #11312
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Alexander Marx <alexander.marx@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
These have to be dropped since the entire system does not
support Path MTU discovery any more. This should not have
any disadvantage on any tunnels since PMTU didn't really
work in the first place.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
As suggested by Oliver "giller" Fieker <oli@new-lan.de>
in bug 10592 I added the functionality to use the squid as ram-only cache.
Further it defines the maximum_object_size_in_memory
as 2% of the in the webif defined "Memory cache size".
The maximum_object_size_in_memory should have a useful
size of the defined memory cache and I don't want to
create another variable which muste be fulled in by the user.
Signed-off-by: Daniel Weismüller <daniel.weismueller@ipfire.org>
Suggested-by: Oliver "giller" Fieker <oli@new-lan.de>
Suggested-by: Kim Wölfel <xaver4all@gmx.de>
Acked-by: Michael Tremer <michael.tremer@ipfire.org>
Cc: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Daniel Weismüller <daniel.weismueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
AES-GCM 128, 196 and 256 bit has been added to Net-to-Net and Roadwarrior section.
HMAC selection for N2N will be disabled if AES-GCM is used since GCM provides an own message authentication (GMAC).
'auth *' line in N2N.conf will be deleted appropriately if AES-GCM is used since '--tls-auth' is not available for N2N.
HMAC selection menu for Roadwarriors is still available since '--tls-auth' is available for RWs
which uses the configuered HMAC even AES-GCM has been applied.
Signed-off-by: Erik Kapfer <erik.kapfer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
When a tunnel that is in always-on configuration closes
unexpectedly, we can instruct strongSwan to restart it
immediately which is precisely what we do now.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
script-security: The support for the 'system' flag has been removed due to security implications
with shell expansions when executing scripts via system() call.
For more informations: https://community.openvpn.net/openvpn/wiki/Openvpn24ManPage .
ncp-disable: Negotiable crypto parameters has been disabled for the first.
Signed-off-by: Erik Kapfer <erik.kapfer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Since fireinfo.ipfire.org is now supporting HTTPS, the
links in the WebUI should point to the secure version of the site.
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
These are not considered secure anymore but are unfortunately
still needed in some cases (legacy hardware, ...).
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Display GeoIP information on active network connections in WebUI.
Use newly implemented function in /var/ipfire/geoip-functions.pl .
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Display GeoIP information on ipinfo.cgi and use newly implemented
function in /var/ipfire/geoip-functions.pl .
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Add GeoIP and rDNS information to DNS nameserver list at netexternal.cgi
Use newly implemented GeoIP function in /var/ipfire/geoip-functions.pl
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The WebUI IDS log did not display the rule name for alerts
where a signature with a five digit number was triggered
(some Emerging Threats signatures are using them).
Changing the regular expression so it will match on five
digit SIDs, too.
Fixes#11519.
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Show a link to the DNS server status at netexternal.cgi
on index.cgi in WebUI.
For the lazy ones... :-)
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The page description (title and headline) should print
"hardware graphs" instead of only mentioning HDDs.
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The links to the IPFire homepage in the credits.cgi file should
point to the HTTPS version of the site now.
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Add option to change remote syslog protocol to TCP, which
is more reliable than UDP, but might be unsupported on
older syslog servers.
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The compression is causing some interoperatibility issues
and does not really compress data very much - even when the
data is quite compressible.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Instead of opening the database again for each lookup,
we will read it into memory on first use and every lookup
after that will be coming from cache.
Reviewed-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
