with some kernel build changes KVER also contains the -ipfire string
so this has to be removed in u-boot.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
We have been importing the language files many times when they are
actually rather slow. This just tidies this up.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This patch adds a watcher thread which monitors if Unbound is still
alive. If not, it will wait until Unbound comes back, rewrite the leases
file and reload Unbound to get it back into sync.
Afterwards Unbound will receive updates as usual.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
We have defaulted to CAKE for all devices that quality. That has however
resulted in worse network quality as some devices could not provide the
compute power necessary for CAKE. There are however only very few
benefits to run an unconfigured CAKE.
This patch changes this back to fq_codel which is computationally
cheaper and should deliver 99% of the throughput that CAKE does. This is
presumably the better trade-off.
We don't use fq_codel on wireless devices since the kernel is running
this for each client. It would have been nice to only apply this to
wireless interfaces in AP mode, but I cannot find a way to tell the
difference with asking NETLINK.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- When a user tries to restore on the console from a backup on IPFire that has a colon in
the filename the tar treats this as meaning that everything after the colon is
information about a remote location to do the extraction to. This results in a filename
that cannot be found, and a remote location that is not correct and the tar operation
fails.
- This has been confirmed by myself.
- If the user tries a restore from a file downloaded to another computer then for most, if
not all browsers, the colon will have been replaced by an underscore or other character.
Firefox, Chromium and Vivaldi do this.
- So any backup file that is selected to be restored using the WUI will no longer have a
colon in the filename.
- This patch adds --force-local to the tar command, which means that tar will treat the
colon as a character in the filename. This will ensure that if a user has any backup
files stored on their IPFire system, with a colon in the filename then doing a restore
from this file will not cause tar to fail.
- The NOW variable is also changed to replace the colon by a dash and to separate the date
and time by an underscore. This filename will be accepted by browsers, without doing
any replacements. Tested out with Firefox, Chromium & Vivaldi.
- The above ensures that both the new and old filename versions will work for doing a
restore.
Fixes: bug13734
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Tested-by: Bernhard Bitsch <bbitsch@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This variable never actually held the kernel version. There were always
suffixes appended and other things changed about it. This makes it a lot
simpler as this variable now holds the actual kernel version.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This went really bad with the latest CSS changes. So this is a
refactor/rewrite of the CGI without many modifications.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This might only be useful for debugging (and even that is questionable).
So instead of flooding logs, we disable this, but it can be easily
enabled for development again.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 5.9.1 to 5.9.3
- Version 5.9.4 exists but it is indicated that SNMP over TLS and/or DTLS is not
functioning properly with various versions of OpenSSL. However I could not find which
versions mentioned in the News or Changelog. The problem will be fixed in a future
version. There are no CVE fixes in 5.9.4, only a relatively few bug fixes so I
decided to wait for the fixed version in case there are users using TLS with SNMP.
- Update of rootfile
- 6 CVE fixes in 5.9.3
- Changelog
5.9.3
security:
- These two CVEs can be exploited by a user with read-only credentials:
- CVE-2022-24805 A buffer overflow in the handling of the INDEX of
NET-SNMP-VACM-MIB can cause an out-of-bounds memory access.
- CVE-2022-24809 A malformed OID in a GET-NEXT to the nsVacmAccessTable
can cause a NULL pointer dereference.
- These CVEs can be exploited by a user with read-write credentials:
- CVE-2022-24806 Improper Input Validation when SETing malformed
OIDs in master agent and subagent simultaneously
- CVE-2022-24807 A malformed OID in a SET request to
SNMP-VIEW-BASED-ACM-MIB::vacmAccessTable can cause an
out-of-bounds memory access.
- CVE-2022-24808 A malformed OID in a SET request to
NET-SNMP-AGENT-MIB::nsLogTable can cause a NULL pointer dereference
- CVE-2022-24810 A malformed OID in a SET to the nsVacmAccessTable
can cause a NULL pointer dereference.
- To avoid these flaws, use strong SNMPv3 credentials and do not share them.
If you must use SNMPv1 or SNMPv2c, use a complex community string
and enhance the protection by restricting access to a given IP address
range.
- Thanks are due to Yu Zhang of VARAS@IIE and Nanyu Zhong of VARAS@IIE for
reporting the following CVEs that have been fixed in this release, and
to Arista Networks for providing fixes.
misc:
- Snmp-create-v3-user: Fix the snmpd.conf path @datadir@ is
expanded in ${datarootdir} so datarootdir must be set before
@datadir@ is used.
general: Many bug fixes
5.9.2
skipped due to a last minute library versioning found bug -- use 5.9.3 instead
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 10.03.0 to 10.03.1
- Update of rootfile
- Several CVE fixes in this release
- Changelog
10.03.1
Fixes for CVE-2024-33869, CVE-2023-52722, CVE-2024-33870, CVE-2024-33871 and
CVE-2024-29510
IMPORTANT: For the 10.04.0 release (fall/autumn 2024) we will be adding
protection for device selection from PostScript input. This will mean that,
by default, only the device specified on the command line will be permitted.
Similar to the file permissions, there will be a "--permit-devices="
allowing a comma separation list of allowed devices. This will also take a
single wildcard "*" allowing any device.
Any application which relies on allowing PostScript to change devices during
a job will have to be aware, and take action to deal with this change.
The exception is "nulldevice", switching to that requires no special action.
A vulnerability was identified in the way Ghostscript/GhostPDL called
tesseract for the OCR devices, which could allow arbitrary code execution.
As as result, we strongly urge anyone including the OCR devices in their
build to update as soon as possible.
As of this release (10.03.1) pdfwrite creates PDF files with XRef streams
and ObjStm streams. This can result in considerably smaller PDF output
files. See Vector Devices for more details.
Ghostscript/pdfwrite now supports passing through PDF "Optional Content".
Our efforts in code hygiene and maintainability continue.
The usual round of bug fixes, compatibility changes, and incremental
improvements.
(9.53.0) We have added the capability to build with the Tesseract OCR
engine. In such a build, new devices are available
(pdfocr8/pdfocr24/pdfocr32) which render the output file to an image, OCR
that image, and output the image "wrapped" up as a PDF file, with the OCR
generated text information included as "invisible" text (in PDF terms, text
rendering mode 3).
Mainly due to time constraints, we only support including Tesseract from
source included in our release packages, and not linking to
Tesseract/Leptonica shared libraries. Whether we add this capability will
be largely dependent on community demand for the feature.
See Enabling OCR for more details.
Incompatible changes
(10.03.1) Almost all the "internal" PostScript procedures defined during the
interpreter startup are now "executeonly", further reducing the attack
surface of the interpreter.
The nature of these procedures means there should be no impact for
legitimate usage, but it is possible it will impact uses which abuse the
previous accessibility (even for legitimate reasons). Such cases may now
require "DELAYBIND", See DELAYBIND
(10.03.1) The "makeimagedevice" non-standard operator has been removed. It
allowed low level access to the graphics library in a way that was,
essentially impossible to secure.
(10.03.1) The "putdeviceprops", "getdeviceprops", "finddevice",
"copydevice", "findprotodevice" non-standard operators have all been
removed. They provided functionality that is either accessible through
standard operators, or should not be used by user PostScript.
(10.03.1) The process of "tidying" the PostScript namespace should have
removed only non-standard and undocumented operators. Nevertheless, it is
possible that any integrations or utilities that rely on those non-standard
and undocumented operators may stop working or may change behaviour.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 2.30.1 to 2.30.6
- Update of rootfile
- Changelog
2.30.6
Improved detection of Nintendo Switch Pro controller report mode
Fixed a rare crash when a controller is disconnected
Fixed creating a framebuffer with KMSDRM on some systems
2.30.5
Respect SDL_HINT_RENDER_DRIVER when creating an accelerated window surface
Clean up any accelerated renderer in SDL_DestroyWindowSurface()
Disable low level USB controller support on Android by default (can be
enabled by setting "SDL_ENV.SDL_JOYSTICK_HIDAPI" metadata to "1" in
AndroidManifest.xml)
Fixed USB permissions dialog on Android 14
Fixed controller mapping matching when one entry has a CRC specified and
another doesn't
Enable joystick support on FreeBSD when building using CMake
Reduced input latency when using an fcitx IME on Linux
Fixed graphical corruption on Raspberry Pi
Fixed crash when using an unstable sort function in SDL_qsort (you shouldn't
do this, but at least it won't crash)
2.30.4
Android rotation will respect user rotation lock preferences
Fixed spurious Left-Ctrl key input when the Right Alt key (AltGr) is pressed
on Windows
Added support for the Saitek Cyborg V.3 Rumble Pad in PS3 mode
Added support for the Razer Kitsune in PS5 mode
Added Linux bindings for the Qanba Drone 2 Arcade Joystick
Leave Nintendo Online controllers in simple report mode so they work with
DirectInput games
Enable using libusb for GameCube controllers when available
2.30.3
Fixed Win+V handling (pasting from clipboard history) on Windows
Fixed Caps Lock and Backspace key mapping for the Colemak keyboard layout on
Windows
Fixed mouse warp on XWayland
Reduced startup time when scanning for game controllers on Linux
Fixed building with C89 compilers
Fixed building with the GDK SDK on Windows
2.30.2
Fixed performance regression initializing controllers on Linux
Added support for the 6-button SEGA Mega Drive Control Pad for Nintendo Online
Added support for the MadCatz Saitek Side Panel Control Deck
Added support for the Hori Fighting Stick EX2
Added support for the Yawman Arrow flightstick
Added a gamepad mapping for the Defender Joystick Cobra R4
Fixed the gamepad mapping for the Sanwa Supply JY-P76USV controller
Poll for the initial controller state when using DirectInput
Allow using SDL_RWFromFile() with named pipes
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.9.4 to 1.10.0
- Update of rootfile
- Changelog
1.10.0
cli : multithreading compression support: improves speed by X times threads allocated
cli : overlap decompression with i/o, improving speed by ~+60%
cli : support environment variables LZ4_CLEVEL and LZ4_NBWORKERS
cli : license of CLI more clearly labelled GPL-2.0-or-later
cli : fix: refuse to compress directories
cli : fix dictionary compression benchmark on multiple files
cli : change: no more implicit `stdout` (except when input is `stdin`)
lib : new level 2, offering mid-way performance (speed and compression)
lib : Improved lz4frame compression speed for small data (up to +160% at 1KB)
lib : Slightly faster (+5%) HC compression speed (levels 3-9), by @JunHe77
lib : dictionary compression support now in stable status
lib : lz4frame states can be safely reset and reused after a processing error (described by @QrczakMK)
lib : `lz4file` API improvements, by @vsolontsov-volant and @t-mat
lib : new experimental symbol `LZ4_compress_destSize_extState()`
build: cmake minimum version raised to 3.5
build: cmake improvements, by @foxeng, @Ohjurot, @LocalSpook, @teo-tsirpanis, @ur4t and @t-mat
build: meson scripts are now hosted into `build/` directory, by @eli-schwartz
build: meson improvements, by @tristan957
build: Visual Studio solutions generated by `cmake` via scripts
port : support for loongArch, risc-v, m68k, mips and sparc architectures
port : improved Visual Studio compatibility, by @t-mat
port : freestanding support improvements, by @t-mat
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 2.45.2 to 2.46.0
- Update of rootfile
- Changelog
2.46.0
UI, Workflows & Features
* The "--rfc" option of "git format-patch" learned to take an
optional string value to be used in place of "RFC" to tweak the
"[PATCH]" on the subject header.
* The credential helper protocol, together with the HTTP layer, have
been enhanced to support authentication schemes different from
username & password pair, like Bearer and NTLM.
* Command line completion script (in contrib/) learned to complete
"git symbolic-ref" a bit better (you need to enable plumbing
commands to be completed with GIT_COMPLETION_SHOW_ALL_COMMANDS).
* When the user responds to a prompt given by "git add -p" with an
unsupported command, list of available commands were given, which
was too much if the user knew what they wanted to type but merely
made a typo. Now the user gets a much shorter error message.
* The color parsing code learned to handle 12-bit RGB colors, spelled
as "#RGB" (in addition to "#RRGGBB" that is already supported).
* The operation mode options (like "--get") the "git config" command
uses have been deprecated and replaced with subcommands (like "git
config get").
* "git tag" learned the "--trailer" option to futz with the trailers
in the same way as "git commit" does.
* A new global "--no-advice" option can be used to disable all advice
messages, which is meant to be used only in scripts.
* Updates to symbolic refs can now be made as a part of ref
transaction.
* The trailer API has been reshuffled a bit.
* Terminology to call various ref-like things are getting
straightened out.
* The command line completion script (in contrib/) has been adjusted
to the recent update to "git config" that adopted subcommand based
UI.
* The knobs to tweak how reftable files are written have been made
available as configuration variables.
* When "git push" notices that the commit at the tip of the ref on
the other side it is about to overwrite does not exist locally, it
used to first try fetching it if the local repository is a partial
clone. The command has been taught not to do so and immediately
fail instead.
* The promisor.quiet configuration knob can be set to true to make
lazy fetching from promisor remotes silent.
* The inter/range-diff output has been moved to the end of the patch
when format-patch adds it to a single patch, instead of writing it
before the patch text, to be consistent with what is done for a
cover letter for a multi-patch series.
* A new command has been added to migrate a repository that uses the
files backend for its ref storage to use the reftable backend, with
limitations.
* "git diff --exit-code --ext-diff" learned to take the exit status
of the external diff driver into account when deciding the exit
status of the overall "git diff" invocation when configured to do
so.
* "git update-ref --stdin" learned to handle transactional updates of
symbolic-refs.
* "git format-patch --interdiff" for multi-patch series learned to
turn on cover letters automatically (unless told never to enable
cover letter with "--no-cover-letter" and such).
* The "--heads" option of "ls-remote" and "show-ref" has been been
deprecated; "--branches" replaces "--heads".
* For over a year, setting add.interactive.useBuiltin configuration
variable did nothing but giving a "this does not do anything"
warning. The warning has been removed.
* The http transport can now be told to send request with
authentication material without first getting a 401 response.
* A handful of entries are added to the GitFAQ document.
* "git var GIT_SHELL_PATH" should report the path to the shell used
to spawn external commands, but it didn't do so on Windows, which
has been corrected.
Performance, Internal Implementation, Development Support etc.
* Advertise "git contacts", a tool for newcomers to find people to
ask review for their patches, a bit more in our developer
documentation.
* In addition to building the objects needed, try to link the objects
that are used in fuzzer tests, to make sure at least they build
without bitrot, in Linux CI runs.
* Code to write out reftable has seen some optimization and
simplification.
* Tests to ensure interoperability between reftable written by jgit
and our code have been added and enabled in CI.
* The singleton index_state instance "the_index" has been eliminated
by always instantiating "the_repository" and replacing references
to "the_index" with references to its .index member.
* Git-GUI has a new maintainer, Johannes Sixt.
* The "test-tool" has been taught to run testsuite tests in parallel,
bypassing the need to use the "prove" tool.
* The "whitespace check" task that was enabled for GitHub Actions CI
has been ported to GitLab CI.
* The refs API lost functions that implicitly assumes to work on the
primary ref_store by forcing the callers to pass a ref_store as an
argument.
* Code clean-up to reduce inter-function communication inside
builtin/config.c done via the use of global variables.
* The pack bitmap code saw some clean-up to prepare for a follow-up topic.
* Preliminary code clean-up for "git send-email".
* The default "creation-factor" used by "git format-patch" has been
raised to make it more aggressively find matching commits.
* Before discovering the repository details, We used to assume SHA-1
as the "default" hash function, which has been corrected. Hopefully
this will smoke out codepaths that rely on such an unwarranted
assumptions.
* The project decision making policy has been documented.
* The strcmp-offset tests have been rewritten using the unit test
framework.
* "git add -p" learned to complain when an answer with more than one
letter is given to a prompt that expects a single letter answer.
* The alias-expanded command lines are logged to the trace output.
* A new test was added to ensure git commands that are designed to
run outside repositories do work.
* A few tests in reftable library have been rewritten using the
unit test framework.
* A pair of test helpers that essentially are unit tests on hash
algorithms have been rewritten using the unit-tests framework.
* A test helper that essentially is unit tests on the "decorate"
logic has been rewritten using the unit-tests framework.
* Many memory leaks in the sparse-checkout code paths have been
plugged.
* "make check-docs" noticed problems and reported to its output but
failed to signal its findings with its exit status, which has been
corrected.
* Building with "-Werror -Wwrite-strings" is now supported.
* To help developers, the build procedure now allows builders to use
CFLAGS_APPEND to specify additional CFLAGS.
* "oidtree" tests were rewritten to use the unit test framework.
* The structure of the document that records longer-term project
decisions to deprecate/remove/update various behaviour has been
outlined.
* The pseudo-merge reachability bitmap to help more efficient storage
of the reachability bitmap in a repository with too many refs has
been added.
* When "git merge" sees that the index cannot be refreshed (e.g. due
to another process doing the same in the background), it died but
after writing MERGE_HEAD etc. files, which was useless for the
purpose to recover from the failure.
* The output from "git cat-file --batch-check" and "--batch-command
(info)" should not be unbuffered, for which some tests have been
added.
* A CPP macro USE_THE_REPOSITORY_VARIABLE is introduced to help
transition the codebase to rely less on the availability of the
singleton the_repository instance.
* "git version --build-options" reports the version information of
OpenSSL and other libraries (if used) in the build.
* Memory ownership rules for the in-core representation of
remote.*.url configuration values have been straightened out, which
resulted in a few leak fixes and code clarification.
* When bundleURI interface fetches multiple bundles, Git failed to
take full advantage of all bundles and ended up slurping duplicated
objects, which has been corrected.
* The code to deal with modified paths that are out-of-cone in a
sparsely checked out working tree has been optimized.
* An existing test of oidmap API has been rewritten with the
unit-test framework.
* The "ort" merge backend saw one bugfix for a crash that happens
when inner merge gets killed, and assorted code clean-ups.
* A new warning message is issued when a command has to expand a
sparse index to handle working tree cruft that are outside of the
sparse checkout.
* The test framework learned to take the test body not as a single
string but as a here-document.
* "git push '' HEAD:there" used to hit a BUG(); it has been corrected
to die with "fatal: bad repository ''".
* What happens when http.cookieFile gets the special value "" has
been clarified in the documentation.
Bug Fixes
* "git rebase --signoff" used to forget that it needs to add a
sign-off to the resulting commit when told to continue after a
conflict stops its operation.
* The procedure to build multi-pack-index got confused by the
replace-refs mechanism, which has been corrected by disabling the
latter.
* The "-k" and "--rfc" options of "format-patch" will now error out
when used together, as one tells us not to add anything to the
title of the commit, and the other one tells us to add "RFC" in
addition to "PATCH".
* "git stash -S" did not handle binary files correctly, which has
been corrected.
* A scheduled "git maintenance" job is expected to work on all
repositories it knows about, but it stopped at the first one that
errored out. Now it keeps going.
* zsh can pretend to be a normal shell pretty well except for some
glitches that we tickle in some of our scripts. Work them around
so that "vimdiff" and our test suite works well enough with it.
* Command line completion support for zsh (in contrib/) has been
updated to stop exposing internal state to end-user shell
interaction.
* Tests that try to corrupt in-repository files in chunked format did
not work well on macOS due to its broken "mv", which has been
worked around.
* The maximum size of attribute files is enforced more consistently.
* Unbreak CI jobs so that we do not attempt to use Python 2 that has
been removed from the platform.
* Git 2.43 started using the tree of HEAD as the source of attributes
in a bare repository, which has severe performance implications.
For now, revert the change, without ripping out a more explicit
support for the attr.tree configuration variable.
* The "--exit-code" option of "git diff" command learned to work with
the "--ext-diff" option.
* Windows CI running in GitHub Actions started complaining about the
order of arguments given to calloc(); the imported regex code uses
the wrong order almost consistently, which has been corrected.
* Expose "name conflict" error when a ref creation fails due to D/F
conflict in the ref namespace, to improve an error message given by
"git fetch".
(merge 9339fca23e it/refs-name-conflict later to maint).
* The SubmittingPatches document now refers folks to manpages
translation project.
* The documentation for "git diff --name-only" has been clarified
that it is about showing the names in the post-image tree.
* The credential helper that talks with osx keychain learned to avoid
storing back the authentication material it just got received from
the keychain.
(merge e1ab45b2da kn/osxkeychain-skip-idempotent-store later to maint).
* The chainlint script (invoked during "make test") did nothing when
it failed to detect the number of available CPUs. It now falls
back to 1 CPU to avoid the problem.
* Revert overly aggressive "layered defence" that went into 2.45.1
and friends, which broke "git-lfs", "git-annex", and other use
cases, so that we can rebuild necessary counterparts in the open.
* "git init" in an already created directory, when the user
configuration has includeif.onbranch, started to fail recently,
which has been corrected.
* Memory leaks in "git mv" has been plugged.
* The safe.directory configuration knob has been updated to
optionally allow leading path matches.
* An overly large ".gitignore" files are now rejected silently.
* Upon expiration event, the credential subsystem forgot to clear
in-core authentication material other than password (whose support
was added recently), which has been corrected.
* Fix for an embarrassing typo that prevented Python2 tests from running
anywhere.
* Varargs functions that are unannotated as printf-like or execl-like
have been annotated as such.
* "git am" has a safety feature to prevent it from starting a new
session when there already is a session going. It reliably
triggers when a mbox is given on the command line, but it has to
rely on the tty-ness of the standard input. Add an explicit way to
opt out of this safety with a command line option.
(merge 62c71ace44 jk/am-retry later to maint).
* A leak in "git imap-send" that somehow escapes LSan has been
plugged.
* Setting core.abbrev too early before the repository set-up
(typically in "git clone") caused segfault, which as been
corrected.
* When the user adds to "git rebase -i" instruction to "pick" a merge
commit, the error experience is not pleasant. Such an error is now
caught earlier in the process that parses the todo list.
* We forgot to normalize the result of getcwd() to NFC on macOS where
all other paths are normalized, which has been corrected. This still
does not address the case where core.precomposeUnicode configuration
is not defined globally.
* Earlier we stopped using the tree of HEAD as the default source of
attributes in a bare repository, but failed to document it. This
has been corrected.
* "git update-server-info" and "git commit-graph --write" have been
updated to use the tempfile API to avoid leaving cruft after
failing.
* An unused extern declaration for mingw has been removed to prevent
it from causing build failure.
* A helper function shared between two tests had a copy-paste bug,
which has been corrected.
* "git fetch-pack -k -k" without passing "--lock-pack" (which we
never do ourselves) did not work at all, which has been corrected.
* CI job to build minimum fuzzers learned to pass NO_CURL=NoThanks to
the build procedure, as its build environment does not offer, or
the rest of the build needs, anything cURL.
(merge 4e66b5a990 jc/fuzz-sans-curl later to maint).
* "git diff --no-ext-diff" when diff.external is configured ignored
the "--color-moved" option.
(merge 0f4b0d4cf0 rs/diff-color-moved-w-no-ext-diff-fix later to maint).
* "git archive --add-virtual-file=<path>:<contents>" never paid
attention to the --prefix=<prefix> option but the documentation
said it would. The documentation has been corrected.
(merge 72c282098d jc/archive-prefix-with-add-virtual-file later to maint).
* When GIT_PAGER failed to spawn, depending on the code path taken,
we failed immediately (correct) or just spew the payload to the
standard output (incorrect). The code now always fail immediately
when GIT_PAGER fails.
(merge 78f0a5d187 rj/pager-die-upon-exec-failure later to maint).
* date parser updates to be more careful about underflowing epoch
based timestamp.
(merge 9d69789770 db/date-underflow-fix later to maint).
* The Bloom filter used for path limited history traversal was broken
on systems whose "char" is unsigned; update the implementation and
bump the format version to 2.
(merge 9c8a9ec787 tb/path-filter-fix later to maint).
* Typofix.
(merge 231cf7370e as/pathspec-h-typofix later to maint).
* Code clean-up.
(merge 4b837f821e rs/simplify-submodule-helper-super-prefix-invocation later
to maint).
* "git describe --dirty --broken" forgot to refresh the index before
seeing if there is any chang, ("git describe --dirty" correctly did
so), which has been corrected.
(merge b8ae42e292 as/describe-broken-refresh-index-fix later to maint).
* Test suite has been taught not to unnecessarily rely on DNS failing
a bogus external name.
(merge 407cdbd271 jk/tests-without-dns later to maint).
* GitWeb update to use committer date consistently in rss/atom feeds.
(merge cf6ead095b am/gitweb-feed-use-committer-date later to maint).
* Custom control structures we invented more recently have been
taught to the clang-format file.
(merge 1457dff9be rs/clang-format-updates later to maint).
* Developer build procedure fix.
(merge df32729866 tb/dev-build-pedantic-fix later to maint).
* "git push" that pushes only deletion gave an unnecessary and
harmless error message when push negotiation is configured, which
has been corrected.
(merge 4d8ee0317f jc/disable-push-nego-for-deletion later to maint).
* Address-looking strings found on the trailer are now placed on the
Cc: list after running through sanitize_address by "git send-email".
(merge c852531f45 cb/send-email-sanitize-trailer-addresses later to maint).
* Tests that use GIT_TEST_SANITIZE_LEAK_LOG feature got their exit
status inverted, which has been corrected.
(merge 8c1d6691bc rj/test-sanitize-leak-log-fix later to maint).
* The http.cookieFile and http.saveCookies configuration variables
have a few values that need to be avoided, which are now ignored
with warning messages.
(merge 4f5822076f jc/http-cookiefile later to maint).
* Repacking a repository with multi-pack index started making stupid
pack selections in Git 2.45, which has been corrected.
(merge 8fb6d11fad ds/midx-write-repack-fix later to maint).
* Fix documentation mark-up regression in 2.45.
(merge 6474da0aa4 ja/doc-markup-updates-fix later to maint).
* Work around asciidoctor's css that renders `monospace` material
in the SYNOPSIS section of manual pages as block elements.
(merge d44ce6ddd5 js/doc-markup-updates-fix later to maint).
* Other code cleanup, docfix, build fix, etc.
(merge 493fdae046 ew/object-convert-leakfix later to maint).
(merge 00f3661a0a ss/doc-eol-attr-fix later to maint).
(merge 428c40da61 ri/doc-show-branch-fix later to maint).
(merge 58696bfcaa jc/where-is-bash-for-ci later to maint).
(merge 616e94ca24 tb/doc-max-tree-depth-fix later to maint).
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.1.3 to 1.2.5
- Update of rootfile
- Changelog
1.2.5
CHANGES :
* exfatprogs: remove the limitation that the device
path length cannot exceed 254 bytes.
* exfatprogs: include the test images in the release
package.
NEW FEATURES :
* fsck.exfat: check and repair the filename which has
invalid characters.
BUG FIXES :
* tune.exfat: check whether the volume has invalid
characters correctly.
* fsck.exfat: check whether the filename and volume
has invalid characters correctly.
* fsck.exfat: fix endianess issues which happen
in the big-endian system.
1.2.4
BUG FIXES :
* tune.exfat: Fix "invalid serial number" error when
setting an serial number.
* fsck.exfat: Fix memory leak in an error path
1.2.3
CHANGES :
* dump.exfat: Report sector size in bytes and cluster size in
terms of sectors.
* fsck.exfat: Show checksum value if the SetChecksum of File
directory entry is invalid.
* mkfs.exfat: Improve FAT length calculation to reduce
the FAT size.
NEW FEATURES :
* mkfs.exfat: Add the option "--sector-size".
* fsck.exfat: Support checking and repairing VendorAllcation and
VendorExtension directory entries.
BUG FIXES :
* exfatprogs: Remove unnecessary memory allocations.
* fsck.exfat: Fix corruption that can occur if the cluster size
is 512-byte.
* fsck.exfat: Fix the SecondaryCount of File directory entry
when the count of Name directory entries is 17 or higher.
* tune.exfat: Fix an error that accepts invalid serial numbers.
1.2.2
CHANGES :
* exfat2img: Allow dumps for read-only devices.
* fsck.exfat: Revert Repairing zero size directory.
NEW FEATURES :
* fsck.exfat: Repair duplicated filename.
* mkfs.exfat: Add the option "q" to print only error messages.
* mkfs.exfat: Add the option "U" to set volume GUID.
* tune.exfat: Add the option "U" / "-u" to set or print volume GUID.
BUG FIXES:
* fsck.exfat: Fix some out-of-bounds memory accesses.
* fsck.exfat: Change not to delete volume GUID directory entry.
1.2.1
CHANGES :
* fsck.exfat: Repair zero size directory.
* fsck.exfat: Four small clean-ups.
1.2.0
CHANGES :
* fsck.exfat: Keep traveling files even if there is a corrupted
directory entry set.
* fsck.exfat: Introduce the option "b" to recover a boot sector even
if an exFAT filesystem is not found.
* fsck.exfat: Introduce the option "s" to create files in
"/LOST+FOUND", which have clusters allocated but was not belonged to
any files.
* fsck.exfat: Rename '.' and '..' entry name to the one user want.
NEW FEATURES :
* fsck.exfat: Repair corruptions of an exFAT filesystem. Please refer
to fsck.exfat manpage to see what kind of corruptions can be repaired.
* exfat2img: Dump metadata of an exFAT filesystem. Please refer to
exfat2img manpage to see how to use it.
BUG FIXES:
* fsck.exfat: Fix an infinite loop while traveling files.
* tune.exfat: Fix bitmap entry corruption when adding new volume lablel.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 8.8.0 to 8.9.1
- Update of rootfile
- Changelog
8.9.1
Bugfixes:
cmake: detect `libssh` via `pkg-config`
cmake: detect `nettle` when building with GnuTLS
cmake: drop `if(PKG_CONFIG_FOUND)` guard for `pkg_check_modules()`
configure: limit `__builtin_available` test to Darwin
connect: fix connection shutdown for event based processing
contrithanks.sh: use -F with -v to match lines as strings
curl: more defensive socket code for --ip-tos
CURLOPT_SSL_CTX_FUNCTION.md: mention CA caching
CURLSHOPT_SHARE.md: mention sessions/cookies as not thread-safe
example/multi-uv: remove the use of globals
ftpserver.pl: make POP3 LIST serve content from the test file
GHA/windows: increase timeout for vcpkg build step
lib: survive some NULL input args
macos: fix Apple SDK bug workaround for non-macOS targets
misc: cleanup after removing years from copyright
os400: build cli manual.
os400: workaround an IBM ASCII run-time library bug
RELEASE-PROCEDURE.md: remove the initial build step
runtests: fold timing details with GHA, sync `-r` tflags
tests: provide FTP directory contents in the test file
tidy-up: URL updates
TODO: thread-safe sharing
transfer: speed limiting fix for 32bit systems
vtls: avoid forward declaration in MultiSSL builds
wolfSSL: allow wolfSSL's implementation of kyber to be used
wolfssl: avoid calling get_cached_x509_store if store is uncachable
wolfssl: CA store share fix
x509asn1: unittests and fixes for gtime2str
8.9.0
Changes:
curl: add --ip-tos (IP Type of Service / Traffic Class)
curl: add --mptcp
curl: add --vlan-priority
curl: add -w '%{num_retries}'
gnutls: support CA caching
mbedtls: support CURLOPT_CERTINFO
noproxy: patterns need to be comma separated
socket: support binding to interface *AND* IP
tcpkeepalive: add CURLOPT_TCP_KEEPCNT and --keepalive-cnt
urlapi: add CURLU_NO_GUESS_SCHEME
wolfssl: support CA caching
Bugfixes:
(lib)curl.rc: set debug flag also for `CURLDEBUG` and `UNITTESTS`
asyn-thread: avoid using GetAddrInfoExW with impersonation
aws-sigv4: url encode the canonical path
BINDINGS: update java link to one that exists
build: add Debug, TrackMemory, ECH to feature list
build: add more supported attributes to the IAR compiler
build: fix llvm 16 or older + Xcode 15 or newer, and gcc
build: fix llvm 17 and older + macOS SDK 14.4 and newer
build: sync warning options between autotools, cmake & compilers
build: tidy up `__builtin_available` feature checks (Apple)
build: untangle `CURLDEBUG` and `DEBUGBUILD` macros
build: use `#error` instead of invalid syntax
cd2nroff: convert two warnings to errors
cd2nroff: use an empty "##" to signal end of .IP sequence
cf-socket: improve SO_SNDBUF update for Winsock
cf-socket: optimize curlx_nonblock() and check its return error
cf-socket: remove obsolete recvbuf
cf-socket: remove two "useless" assignments
cfilters: make Curl_conn_connect always assign 'done'
cmake: add CURL_USE_GSASL option with detection + CI test
cmake: allow `ENABLE_CURLDEBUG=OFF` with `ENABLE_DEBUG=ON`
cmake: allow SOVERSION override with `CURL_LIBCURL_SOVERSION`
cmake: alpha-sort feature list
cmake: always build unit tests with the `testdeps` target
cmake: bring `curl-config.cmake` closer to `FindCURL`
cmake: create `configurehelp.pm` like autotools does
cmake: delete unused `HAVE_LIBSSH2`, `HAVE_LIBSOCKET` macros
cmake: detect `libidn2` also via `pkg-config`
cmake: enable SOVERSION for Cygwin and `CMAKE_DLL_NAME_WITH_SOVERSION`
cmake: fix `-Wredundant-decls` in unity/mingw-w64 builds
cmake: fix brotli lib order
cmake: fix building `unit1600` due to missing `ssl/openssl.h`
cmake: fix building in unity mode
cmake: fix building with both md4 and md5 in unity mode
cmake: fix builds with detected libidn2 lib but undetected header
cmake: fix feature and protocol lists for SecureTransport
cmake: fix quotes when appending multiple options (SecureTransport)
cmake: fix test 1013 with websockets enabled and no TLS
cmake: improve wolfSSL detection
cmake: show protocols, then features
cmake: stop setting SOVERSION for the static lib target
cmake: sync CA bundle/path detection with autotools
cmake: sync protocol/feature list with `curl -V` output
cmake: use `APPLE` instead of `CMAKE_SYSTEM_NAME` string
cmake: whitespace, formatting/tidy-up in comments
cmdline-docs: "added in" cleanups
cmdline-docs: fix `--proxy-ca-native` example + tidy-ups
cmdline-opts/_PROTOCOLS.md: mention WS(S)
cmdline-opts/ech.md: shorten the help text
cmdline-opts/fail.md: expand and clarify
cmdline-opts/interface.md: expand the documentation
cmdline-opts: category cleanup
cmdline-opts: expand the parallel explanations
cmdline-opts: shorten six help texts
cmdline: expand proxy option explanations
code: language cleanup in comments
configure: CA bundle/path detection fixes
configure: fix `SystemConfiguration` detection
configure: fix pkg-config library name 'libnghttp3'
configure: fix pkg-config names (zstd, ngtcp2*)
configure: limit `SystemConfiguration` test to non-c-ares, IPv6 builds
configure: remove 'deeper' checks for `AC_CHECK_FUNCS`
configure: require a QUIC library if nghttp3 is used
configure: sort feature list, lowercase protocols, use backticks
configure: use `$EGREP` in place of `grep -E`
configure: use AC_MSG_WARN for TLS/experimental warning texts
connect-to.md: expand with examples
connection: shutdown TLS (for FTP) better
cookie-jar.md: see also --junk-session-cookies
curl-config: revert to backticks to support old target envs
curl: allow etag and content-disposition for 3xx reply
curl: bsearch the --write-out variable name
curl: check for --disable case *sensitively*
curl: list categories in --help
curl: make warnings and other messages aware of terminal width
curl: output "flying saucers" with leading carriage return
curl_easy_escape: elaborate a little on encoding a URL
curl_mprintf.md: add missing comma
curl_multi_poll.md: expand the example with an custom file descriptor
curl_str[n]equal.md: tidy up text to make them stand-alone
curl_url_set.md: libcurl only parses :// URLs
curl_url_set: elaborate on scheme guessing
curldown: make 'added-in:' a mandatory header field
CURLOPT_CONNECTTIMEOUT*: clarify, document the milliseond version
CURLOPT_ECH.md: remove repeated 'if'
CURLOPT_NETRC.md: clarify what it does on Windows
CURLOPT_RESOLVE.md: mention hostname can be wildcard ('*')
CURLOPT_SSL_VERIFYHOST.md: refresh
CURLOPT_TLSAUTH_PASSWORD/USERNAME.md: language fixups
DISTROS: add a link to the list archive
DISTROS: add AlmaLinux package source link
DISTROS: add MSYS2 (native) links
docs/cmdline-opts: fix mail-auth example TLD typo
docs/cmdline-opts: remove two superfluous "Added in" mentions
docs/libcurl: polish the single-line descriptions
docs/Makefile.am: make curl-config.1 install
docs: reference non deprecated libcurl options
docs: start markdown headers with capital letter where applicable
doh-insecure.md: expand
doh: fix cleanup
doh: fix leak and zero-length HTTPS RR crash
dump-header.md: mention minus for stdout
examples/threaded-ssl: remove locking callback code
examples: add missing binaries to .gitignore
examples: delete unused includes
examples: fix compiling with MSVC
examples: suppress deprecation warnings locally
FEATURES.md: refresh
file: separate fake headers and body with a stand-alone CRLF
ftp: remove redundant null pointer check in loop condition
get.d: clarify the explanation
GHA/windows: add MSVC wolfSSL job with test
GHA/windows: ignore FTP test results for old-mingw-w64
GHA: add MSVC UWP job, expand jobs with more options
GHA: detect and warn for more English contractions
GHA: disable MQTT and WebSocket tests in Windows jobs
GHA: disable TFTP tests in Windows jobs
GHA: enable tests 1139, 1177, 1477 on Windows
GHA: improve vcpkg cache, add BoringSSL ECH and LibreSSL MSVC jobs
GHA: unify http3 workflows into one
GHA: use vcpkg to install packages for MSVC jobs
GIT-INFO.md: remove version requirements
gnutls: improve TLS shutdown
gnutls: pass in SNI name, not hostname when checking cert
help: add flags to output and ssh categories
hostip: skip error check for infallible function call
http/3: add shutdown support
http/3: resume upload on ack if we have more data to send
http: remove "struct HTTP"
http: write last header line late
idn: fix ß with AppleIDN
idn: make macidn fail before trying conversion if name too long
idn: tweak buffer use when converting with macidn
lib/v*: tidy up types and casts
lib: add a few DEBUGASSERT(data) to aid code analyzers
lib: add failure reason on bind errors
lib: fix gcc warning in certain debug builds
lib: fix thread entry point to return `DWORD` on WinCE
lib: graceful connection shutdown
lib: prefer `var = time(NULL)` over `time(&var)`
lib: tidy up types and casts
lib: xfer_setup and non-blocking shutdown
libcurl-docs: make option lists alpha-sorted
libcurl-easy.md: now *more* than 300 options
libcurl.pc: add `Requires.private`, `Requires` for static linking
libcurl.pc: add more `Requires.private`/`Requires` dependencies
libssh: remove CURLOPT_SSL_VERIFYHOST check
macos: add workaround for gcc, non-c-ares, IPv6, compile error
macos: undo `availability` macro enabled by Homebrew gcc
managen: "added in" fixes
managen: cleanups to generate nicer-looking output
managen: error on trailing blank lines in input files
managen: fix removing backticks from subtitles
managen: insert final .fi for files ending with a quote
managen: introduce "Multi: per-URL"
managen: only output .RE for manpage output
managen: output tabs for each 8 leading spaces
managen: warn on excessively long help texts
MANUAL.md: wrap two example urls that overrun styling
mbedtls: check version before getting tls version
mbedtls: check version for cipher id
mbedtls: correct the error message for cert blob parsing failure
mbedtls: send close-notify on close
mbedtls: v3.6.0 workarounds
md4: fix compilation with OpenSSL 1.x with md4 disabled
misc: fix typos
mk-ca-bundle.pl: delay 'curl -V' execution until it is needed
multi: add multi->proto_hash, a key-value store for protocol data
multi: do a final progress update on connect failure
multi: fix multi_wait() timeout handling
multi: fix pollset during RESOLVING phase
multi: multi_getsock(), check correct socket
ngtcp2+quictls: fix cert-status use
noproxy: test bad ipv6 net size first
openssl/gnutls: rectify the TLS version checks for QUIC
openssl: fix %-specifier in infof() call
openssl: fix hostname handling when using ECH
openssl: stop duplicate ssl key logging for legacy OpenSSL
os400: make it compilable again
pytest: add ftp upload tests
pytest: include testenv/vsftpd.py in dist tarball
quic: enable UDP GRO
quic: openssl quic, cmake and doc version update to 3.3.0
quic: require at least OpenSSL 3.3 for QUIC
quic: update to quiche 0.22.0
quiche: fix operand of ‘?:’ changes signedness
request.md: language fix
request: change the struct field bodywrites to a bool, only for hyper
reuse: switch to REUSE 3.2 and REUSE.toml
runtests: show name and keywords for failed tests in summary
runtests: sort test IDs in summary lines
runtests: support %DATEfor YYYY-MM-DD of right now
runtests: support %VERNUM
runtests: support crlf="yes" for the <stderr> section
sectransp: fix `HAVE_BUILTIN_AVAILABLE` checks to not emit warnings
sectransp: fix clang compiler warnings, stop silencing them
sectransp: remove large cipher table
sectransp: use common code for cipher suite lookup
sendf: fix CRLF conversion of input
smtp: for starttls, do full upgrade
socket: change TCP keepalive from ms to seconds on DragonFly BSD
socket: use SOCK_NONBLOCK to eliminate extra system call
socketpair: add `eventfd` and use `SOCK_NONBLOCK` for `socketpair()`
src/Makefile.am: remove SUBDIRS assignment
system_win32: add missing curl.h include
tcpkeepalive: support TCP keep-alive parameters on Solaris <11.4
test1119: adapt for `.md` input
test1139: scan .md files instead of .3 ones
test1175: scan libcurl-errors.md, not the generated .3 version
test1486: verify that write-out.md and tool_writeout.c are in sync
test2600: disable on win32
test: add test1484, for HEAD with content
test: add test1546, chunked not last transfer encoding
tests/scripts: call it 'manpage' (single word)
tests: add pytest for --ciphers and --tls13-ciphers options
tests: delete `CharConv` remains
tests: delete redundant `!MSDOS` guard
tests: extend user/password parsing test1620
tests: fix sshd IdentityFile path for MinGW/Cygwin
tests: fix sshd UserKnownHostsFile path for MinGW/Cygwin
tests: include current directory when running test Perl commands
tests: log "Throwing away" messages before throwing away
tests: run with "--trace-config all" to provide even more info
tests: sync feature names with `curl -V`
tests: test_17_ssl_use.py clarify mbedTLS TLSv1.3 support
tests: use exec when spawning nghttpx
tidy-up: use consistent casing for Windows directories
TODO: remove some old, clarify, add something
tool_cb_hdr: return error for failed header writes
tool_operate: avoid explicitly setting verifypeer to 1
tool_operate: simplify return code handling from url_proto()
tool_writeout: get certinfo only when needing it
trace-ascii.md: mention "%" for stderr
transfer: avoid polling socket every transfer loop
transfer: conn close on paused upload
transfer: do not use EXPIRE_NOW while blocked
transfer: remove curl_upload_refill_watermark, no longer used
transfer: set CSELECT_IN if there is data pending
unit2604: use 'unitfail' instead of 'error' variable
url: allow DoH transfers to override max connection limit
urlapi: remove unused definition of HOST_BAD
variable.md: make example use expand
verify-synopsis.pl: work with .md files
vms: fixed language in comment
vtls: deprioritize Secure Transport
vtls: replace addsessionid with set_sessionid
winbuild: fix PE version info debug flag
winbuild: MS-DOS batch tidy-ups
winbuild: remove outdated WIN32 defines
windows: fix UWP builds, add GHA job
winsock: move SO_SNDBUF update into cf-socket
wolfssl: assume key_file equal to clientcert if no key_file
wolfssl: use larger error buffer when formatting errors
x509asn1: add some common ECDSA OIDs
x509asn1: ASN1tostr() should fail when 'constructed' is set
x509asn1: fallback to dotted OID representation
x509asn1: make Curl_extract_certinfo store error message
x509asn1: prevent NULL dereference
x509asn1: remove superfluous free()
x509asn1: remove two static variables
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 24.03.0 to 24.08.0
- Update of rootfile
- sobump has dependency of cups-filters
- Changelog
24.08.0
core:
* Add support for modifying the appearance stream text in form field choice
* Fix buffer overflow in Windows specific font selection code
* Fix crashes in malformed files
* Internal code improvements
qt5:
* Add support for modifying the appearance stream text in form field choice
qt6:
* Add support for modifying the appearance stream text in form field choice
utils:
* pdfinfo: Fix crash in malformed documents
24.07.0
core:
* Fix crashes in broken files
* Internal code improvements
qt6:
* Add getters for document additional actions
* Implement reset forms link
qt5:
* Add getters for document additional actions
* Implement reset forms link
utils:
* pdfinfo: Fix crash in broken documents when using -dests
build system:
* Mark glib-mkenums as required
24.06.0
core:
* Performance improvements in some files
* Fix some issues with files bigger than 2^31 bytes
* Remove all cairo include guards for cairo < 1.16
* Fix MSVC build
* Internal code improvements
qt6:
* Update Qt6 doc example
* Use the non deprecated version of QString::fromUcs4
glib:
* properly document return value from poppler_font_info_scan
24.05.0
core:
* Fix signing not being totally correct in some kind of PDF files
* Assume "Adobe-Identity" for character collection. Issue #1465
* Small improvements in annotation font rendering
* Remove some GooString methods, use std::string ones instead
* Move some GooString methods to UTF.h
* Fix crash in broken files
cpp:
* cpp: Fix crash extracting text and font in some files. Issue #1477
* Change base class of ustring to char16_t
qt6:
* Add async API for certificate validation
* Fix text extraction for Landscape/Seascape pages
qt5:
* Add async API for certificate validation
* Fix text extraction for Landscape/Seascape pages
utils:
* pdfdetach: Small code improvements
* pdftops: Write compliant ps header
build system:
* Increase minimum supported base to that provided by Ubuntu 22.04
24.04.0
core:
* Optimize page text extraction speed
* Fix clipping path handling in some files. Issue #739
* Fix regression in text selection
* Fix text search across lines between paragraphs
qt6:
* Fix crash in SoundObject::data
utils:
* pdfsig: Add Catalan translation
build system:
* Build code as C++20
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 7.94 to 7.95
- Update of rootfile
- Changelog
7.95
o [Windows] Upgraded Npcap (our Windows raw packet capturing and
transmission driver) from version 1.75 to the latest version 1.79. It
includes many performance improvements, bug fixes and feature
enhancements described at https://npcap.com/changelog.
o Integrated over 4000 IPv4 OS fingerprints submitted since June 2020. Added
336 fingerprints, bringing the new total to 6036. Additions include iOS 15 &
16, macOS Ventura & Monterey, Linux 6.1, OpenBSD 7.1, and lwIP 2.2
o Integrated over 2500 service/version detection fingerprints submitted since
June 2020. The signature count went up 1.4% to 12089, including 9 new
softmatches. We now detect 1246 protocols, including new additions of grpc,
mysqlx, essnet, remotemouse, and tuya.
o [NSE] Four new scripts from the DINA community
(https://github.com/DINA-community)
for querying industrial control systems:
+ hartip-info reads device information from devices using the Highway
Addressable Remote Transducer protocol
+ iec61850-mms queries devices using Manufacturing Message Specification
requests. [Dennis Rösch, Max Helbig]
+ multicast-profinet-discovery Sends a multicast PROFINET DCP Identify All
message and prints the responses. [Stefan Eiwanger, DINA-community]
+ profinet-cm-lookup queries the DCERPC endpoint mapper exposed via the
PNIO-CM service.
o Upgraded included libraries: Lua 5.4.6, libpcre2 10.43, zlib 1.3.1,
libssh2 1.11.0, liblinear 2.47
o [GH#2639] Upgraded OpenSSL binaries (for the Windows builds and for
RPMs) to version 3.0.13. CVEs resolved in this update include only 2
moderate-severity issues which we do not believe affect Nmap:
CVE-2023-5363 and CVE-2023-2650
o [Zenmap][Ndiff][GH#2649] Zenmap and Ndiff now use setuptools, not distutils
for packaging.
o [Ncat][GH#2685] Fixed Ncat UDP server mode to not quit after EOF on stdin.
Reported as Debian bug:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1039613
o [GH#2672] Fixed an issue where TCP Connect scan (-sT) on Windows would fail to
open any sockets, leading to scans that never finish. [Daniel Miller]
o [NSE] ssh-auth-methods will now print the pre-authentication banner text when
available. Requires libssh2 1.11.0 or later. [Daniel Miller]
o [Zenmap][GH#2739] Fix a crash in Zenmap when changing a host comment.
o [NSE][GH#2766] Fix TLS 1.2 signature algorithms for EdDSA.
[Daniel Roethlisberger]
o [Zenmap][GH#2706] RPM spec files now correctly require the python3 package,
not python>=3
o Improvements to OS detection fingerprint matching, including a syntax change
for nmap-os-db that allows ranges within the TCP Options string. This leads
to more concise and maintainable fingerprints. [Daniel Miller]
o Improved the OS detection engine by using a new source port for each retry.
Scans from systems such as Windows that do not send RST for unsolicited
SYN|ACK responses were previously unable to get a response in subsequent
tries. [Daniel Miller]
o Several profile-guided optimizations of the port scan engine. [Daniel Miller]
o [GH#2731] Fix an out-of-bounds read which led to out-of-memory errors when
duplicate addresses were used with --exclude
o [GH#2609] Fixed a memory leak in Nsock: compiled pcap filters were not freed.
o [GH#2658] Fixed a crash when using service name wildcards with -p, as in -p
"http*"
o [NSE] Fixed DNS TXT record parsing which caused asn-query to fail in Nmap
7.80 and later. [David Fifield, Mike Pattrick]
o [NSE][GH#2727][GH#2728] Fixed packet size testing in KNX scripts [f0rw4rd]
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
