This is achieved by telling killproc which PIDs to wait for.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This ensures that all ip route and ip rule commands are redirected to null if the output
is not used to feed into a variable.
- This will prevent any error messages related to empty iproute tables being displayed
during boot if an empty table is accessed.
Fixes: Bug#12763
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This ensures that all ip route and ip rule commands are redirected to null if the output
is not used to feed into a variable.
- This will prevent any error messages related to empty iproute tables being displayed
during boot if an empty table is accessed.
Fixes: Bug#12763
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This ensures that all ip route and ip rule commands are redirected to null if the output
is not used to feed into a variable.
- This will prevent any error messages related to empty iproute tables being displayed
during boot if an empty table is accessed.
Fixes: Bug#12763
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This ensures that all ip route and ip rule commands are redirected to null if the output
is not used to feed into a variable.
- This will prevent any error messages related to empty iproute tables being displayed
during boot if an empty table is accessed.
Fixes: Bug#12763
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This ensures that all ip route and ip rule commands are redirected to null if the output
is not used to feed into a variable.
- This will prevent any error messages related to empty iproute tables being displayed
during boot if an empty table is accessed.
Fixes: Bug#12763
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This ensures that all ip route and ip rule commands are redirected to null if the output
is not used to feed into a variable.
- This will prevent any error messages related to empty iproute tables being displayed
during boot if an empty table is accessed.
Fixes: Bug#12763
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This ensures that all ip route and ip rule commands are redirected to null if the output
is not used to feed into a variable.
- This will prevent any error messages related to empty iproute tables being displayed
during boot.
- Tested on my vm system and confirmed that the fix in ipsec-interfaces stops the "FIB
table does not exist" and "RTNETLINK answers: no such file or directory" messages during
boot.
Fixes: Bug#12763
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- As discussed in the Dev conf call on 2024-Apr-08
- sslh has not been functioning since last update ion Sep 2021. Configuration syntax
was radically changed somewhere in the update from 1.7a(2013) to 1.22c in Sep 2021
- removal of sslh from make file
- removal of lfs file
- removal of rootfile
- removal of paks files
- removal of initscript
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This kind of grub addon will extend the grub boot menu by a additional
submenu where a BTRFS snapshot can be selected to directly use as root
volume and boot into it.
The grub-btrfsd daemon is using inotify(tools) to watch the snapshot directory for
new or deleted snapshots and calls grub-mkconfig to adjust the snapshot grub submenu
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
the only file in the package is now the initskript to configre powersave mode using cpupower
which is shipped with the kernel.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This integrates the wsdd initscript functions into the samba initscript. When samba is
started or stopped or the status requested then wsdd is part of that process.
- Tested in my vm testbed and confirmed to work for start, stop and status. Confirmed
pid's shown with status command are in the appropriate pid files.
Fixes: bug#13445
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
We disable cores if the are affected by some cpu vulnerabilities
this cores report errors if you try to change the settings.
So only print the output for core0 and hide it for all cores.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
the initskript loads a test-modul for amd-pstate (which traces on intel)
and off course reports errors if firmware settings are missing.
this also fix the error at start because also amd-pstate doesn't support
ondemand mode.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This v3 version now has two if loops allowing logging of incoming drop hostile or
outgoing drop hostile or both or neither.
- Dependent on the choice in optionsfw.cgi this loop will either log or not log the
dropped hostile traffic.
Fixes: bug12981
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Calling a global sync operation manually is generally a bad idea as it
can block for forever. If people have storage that does not retain
anything that is being written to it, they need to fix their hardware.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
myMPD is written in C and has a nice WebGUI to play
local music and also a WebRadio browser.
This is to replace the removec client175.
After install it can reached via
https://IP_OF_THE_IPFIRE:8800
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This updated version of this script avoids any errors if collectd is not
running (yet) which might happen during the boot process.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The "ping" plugin does not re-resolve the gateway IP address after
pinging it for the first time. For most people this won't be a big
problem, but if the default gateway changes, the latency graph won't
work any more.
In order to do re-resolve "gateway", the only way is to restart
collectd.
Fixes: #13522
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Acked-by: Peter Müller <peter.mueller@ipfire.org>
Because of a single variable being passwd with the workgroup, it would
have been possible to inject shell commands here. Passing it in the
array prevents that.
Signed-off-by: Daniel Weismüller <daniel.weismueller@ipfire.org>
- lfs and toorfile created for wsdd
- wsdd added to make.sh script
- created install/update/uninstall scripts for wsdd that create an unpriveleged user and
group.
- initscript created for wsdd. As wsdd is a python3 script, when it is run as a daemon the
pidof command does not find any pid for wsdd. So a directory/file for a pid file was
created. This is then passed to the loadproc and killproc commands. After the loadproc
command has been created the pid is extracted from the ps aux command and put into the
pid file. This then works when running the killproc command for it to know what to go
and stop. The statusproc command does not have the ability to feed in the pid from a
pid file and so it fails to find a running wsdd as it uses the pidof command. Code was
added to the status section of the initscript to check if the pid file exists and if so
to print the same command as used with the statusproc command, and also the same
wording if the pid file does not exist because wsdd is not running.
- info from the ethernet/settings file is used to identify if only green0 is available or
if blue0 is also used and based on this the appropriate interface commands are added to
the wsdd command.
- wsdd is also set up to run in a chroot
- Has been tested on my vm testbed, initially by editing the files on the vm clone. After
everything confiremd to be working, the build was successfully carried out and the
.ipfire package was copied to a new vm clone installed and shown to perform as expected.
This test only confirms that wsdd is correctly installed and started. Shutsdown and
restarts on reboot successfully. Confirmed from the ps aux info that wsdd has been
started with the correct options. Thge testing can not evaluate if wsdd enables windows
systems newer than version 7 top be able to detect the samba shares as I have no
windows systems.
Fixes: Bug13445
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Some programs do not write their own PID files any more, but since our
initscripts heavily rely on those, this extension allows to store it
easily.
Signed-off-by: Daniel Weismüller <daniel.weismueller@ipfire.org>
getpids() checked whether it needed to pass a pid file to pidofproc, but
the check was inverted.
Signed-off-by: Daniel Weismüller <daniel.weismueller@ipfire.org>
Previously, we sent Apache a signal to relaunch itself which caused
Apache to kill all child processes, and re-execute them.
However, when updating glibc, any newly compiled modules could not be
loaded as Apache was running with the previous version of glibc until
the next reboot.
This change will now properly stop Apache and restart it which solves
this problem.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
