Since we have extended services.cgi that it reads the Services field
from the Pakfire metadata, we will need to make sure that that metadata
is going to be on those systems.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 2.2.4 to 2.2.7
- Update of rootfile
- Changelog
Release 2.2.7 brings lots of improvements and fix some minor issues reported. It add
some new VRRP features as well. Stability has been even more extended.
New
ipvs: Add support to twos scheduler.
vrrp: Add vrf option for unicast without specifying an interface.
vrrp: Add option unicast_fault_no_peer. Previously if unicast_src_ip (or any
other unicast option) was specified, but no unicast peers were
configured, then the VRRP instance would operate in multicast mode. A
user has identified that, due to automatic configuration generation,
they could have a configuration that should operate in unicast mode,
but that no unicast peers were configured. In this case, they did not
want the VRRP instance to revert to multicast mode. In order to
maintain backward compatibility, keepalived can’t simply change to not
allowing no unicast peers. Instead, this commit adds the configuration
option “unicast_fault_no_peer”, which if specified causes the VRRP
instance to go to fault state if no unicast peers are configured.
vrrp: Allow specification of multicast address to be used.
vrrp: Add vrf option to static and vrrp routes.
vrrp: Add option to resend vrrp states on fifos after reload. Since
keepalived restarts FIFOs scripts it is managing when a reload occurs,
it can be helpful to send the VRRP instance and group states after a
reload. This commit adds option fifo_write_vrrp_states_on_reload to do
that, and it means that what is written to the FIFOs with default
configuration does not change.
vrrp: Allow duplication of VRIDs on an interface with unicast peers. If two
VRRP instances are using unicast peers and there is no overlap of
unicast peers between the vrrp instances, then the vrrp instances can
use the same VRIDs.
global: Don’t assume running as user root.
systemd: Add keepalived-non-root.service systemd service file.
keepalived-non-root.service allows keepalived to be run as a non
root user, but with specific added capabilities to allow all the
functionality that keepalived needs.
Improvements
vrrp: Stop receiving any data on garp and ndisc sockets. This is a send-only
channel.
vrrp: Open gratuitous ARP socket as an ARP socket rather than RARP. Now that
the receiving of packets on the garp socket has been stopped, we can
open the socket with the correct type of binding, and we won’t have a
queue of received messages build up.
vrrp: Extend cBPF filtering code to support standard definition.
vrrp: Optimise nftables configuration to limit some rules to macvlans. If we
are moving messages that have been generated on a macvlan, we nftables
rules can be optimised to restrict them to macvlan interfaces.
vrrp: Drop ICMPV6 Router Solicitation messages from vmac interfaces. When we
create a vmac interface, a short time afterwards the kernel sends a
router solicition message with the source MAC address of the vmac
interface. The problem is that this will upset snooping switches if
the VRRP instance is in backup state. Furthermore, we can’t simply
move the packet onto the underlying interface since the ICMPV6 payload
also contains the MAC address of the vmac interface. We can’t just
change the MAC address in the ICMPV6 message, since there is also a
checksum which would need to be recalculated. The only solution at the
moment is to drop the packet. This shouldn’t be a problem since the
underlying interface should have sent a Router solicitation message
when it came up.
vrrp: Add option to specify MAC address for VMACs.
vrrp: Don’t lose some configuration faults. The following errors were being
detected in vrrp_complete_instance() and the VRRP instance was then
supposed to be put into fault state since it couldn’t operate.
However, the need to go to fault state was subsequently being lost.
The configuration errors that were being lost were: (a) Configuring
use of a VMAC on a non Ethernet interface (b) Attempting to use
multicast on an interface that doesn’t support it (c) Using an ipvlan
without a source IP address (d) ipvlan address family not matching
VRRP isntance’s (e) VRID conflicts on an interface which could be
deleted an recreated on a different interface (f) An interface
specified for a VIP is the same as the VRRP instance’s VMAC or another
VRRP instance’s VMAC. This improvement ensures that the VRRP instance
will be put into, and remain in, fault state, since it cannot
successfully operate. As can be seen from the list of circumstances
above, they were very unlikely to occur, but were possible.
vrrp: Bind IPv6 socket to multicast address. Previously IPv6 sockets were
being bound to the ::1 address, since trying to bind to the multicast
address was failing. The reason for failing has now been discovered to
be that the scope_id needed to be set (i.e. the interface index),
since the multicast addresses that we use are link-local multicast
addresses. This improvement now sets the scope_id, so the socket can
successfully be bound to the multicast address.
vrrp: Set IPV6_MULTICAST_ALL on IPv6 sockets if available.
vrrp: Some SNMP extension and improvements: - Correct FastOpenNoCookie and
L3Mdev variable types - Don’t write multicast address to SNMP when
using unicast. - Don’t write unconfigured LVS sync daemon address to
SNMP. - Define and use SNMP_TruthValue. - Define and use
SNMP_InetAddressType. - Correct reporting accept mode for VRRPv3 SNMP.
vrrp: Misc DBus improvements (Opening, logging, data_dir, policy, …)
vrrp: Handle VMAC’s interface changing on reload properly.
vrrp: If accept traffic for VIPs changes on reload, update firewall.
vrrp: Stop going to backup if reload IPv6 and change vmac_xmit_base.
vrrp: Add add/prepend/append options to static and virtual routes. The
kernel by default prepends routes, whereas the ip (iproute2) utility
be default adds routes (adding a route does not allow duplicates
whereas appending or prepending does). keepalived previously has not
set the flags relating to this, and so has always prepended routes.
This means that duplicate routes could be created.
lib: Update Red Black tree code to Linux 5.15-rc4.
script: Extend sample_notify_fifo.sh.
doc: Misc documentation updates.
docker: Upate docker file.
init: Init handling extensions. Make parent process exit with meaningful
status on error. Ensure systemd is not notified of successful start if
failed. fix building without systemd notify suport.
bfd: handle unexpected closure of pipe to checker and vrrp processes. If the
parent process abnormally terminates and then the BFD process
terminates due to PDEATHSIG before the vrrp or checker processes
terminate, the vrrp and checker processes can get a read error on the
pipes used to communicate with the BFD process.
bfd: make BFD work when IPv6 disabled on system.
Fixes
lib: Fix calculating CLOCK_REALTIME and CLOCK_MONOTONIC offsets.
lib: scheduler: Handle cancelling timer thread on ready queue. The timer
thread on the ready queue, if cancelled, was corrupting the read
list_head, since it assumed it was on a red black tree.
snap: Fix building snaps.
ipvs: Fix building with glibc prior to v2.19 (released 2014).
bfd: Handle interface down/address missing when keepalived starts. This
resolves a segfault, and also makes bfd retry once per minute to create
send socket if it cannot do so due to no address to bind to on an
interface.
vrrp: Fix unicast with interface in a VRF domain.
vrrp: Fix moving excess VIPs to eVIPs, by properly handling vip_cnt.
vrrp: Fix configured IPv6 multicast addresses with VMACs. Using different
multicast addresses with IPv6 on the same interface without using
VMACs is only supported if the kernel supports IPV6_MULTICAST_ALL
(from Linux v4.20).
vrrp: Fix checking for unicast with VMAC/ipvlan and no peers.
vrrp: Fix checking if have unicast ppers if unicast_ttl specified.
vrrp: Don’t segfault if duplicate VMAC name, but ignore second name.
vrrp: Don’t delete and recreate VMAC on reload if only VRID has changed.
There seems to be an issue deleting and then immediately recreating a
VMAC on the same interface. This commit therefore simply changes the
MAC address if the only change is the VRID.
vrrp: Fix nftables config if VMAC interface changed on reload.
vrrp: Don’t segfault if don’t have permission for ARP/NDISC socket.
vrrp: Fix IPv6 with vmac_xmit_base.
vrrp: fix disabling vmac-xmit-base with VRRPv3 IPv6 use_vmac.
vrrp: Fix specifying user/group for vrrp_scripts.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Historically, the MD5 checksums in our LFS files serve as a protection
against broken downloads, or accidentally corrupted source files.
While the sources are nowadays downloaded via HTTPS, it make sense to
beef up integrity protection for them, since transparently intercepting
TLS is believed to be feasible for more powerful actors, and the state
of the public PKI ecosystem is clearly not helping.
Therefore, this patch switches from MD5 to BLAKE2, updating all LFS
files as well as make.sh to deal with this checksum algorithm. BLAKE2 is
notably faster (and more secure) than SHA2, so the performance penalty
introduced by this patch is negligible, if noticeable at all.
In preparation of this patch, the toolchain files currently used have
been supplied with BLAKE2 checksums as well on
https://source.ipfire.org/.
Cc: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Acked-by: Michael Tremer <michael.tremeripfire.org>
* Add a Summary and Services field to all pak lfs files
* Replace occurances of INSTALL_INITSCRIPT with new INSTALL_INITSCRIPTS
macro in all pak lfs files.
Signed-off-by: Robin Roevens <robin.roevens@disroot.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
This patch re-enables this package for build and it builds against next
with Linux 5.15.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Not sure why this has ever been there. This simply makes it
nicer to read and edit because we can have line-breaks now.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Since this update is a mayor version update, it brings a lot of changes.
The changelog can be found in here --> http://www.keepalived.com/changelog.html .
Added /etc/sysconfig/keepalived in ROOTFILE and in backup/includes.
Signed-off-by: Erik Kapfer <erik.kapfer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
The setting cannot be set on the default system because the ip_vs
module is not loaded by default and there is no reason to load it
just because we would be able to set the setting.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This path to keepalived was just incorrect and therefore
the daemon could not easily be reloaded.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Most of these files still used old dates and/or domain names for contact
mail addresses. This is now replaced by an up-to-date copyright line.
Just some housekeeping... :-)
Signed-off-by: Peter Müller <peter.mueller@link38.eu>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
