- Update from 7.75.0 to 7.76.1
- Update of rootfile
- Changelog is too large to include here.
Full details can be found in the CHANGES file in the source tarball
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Install Canary-Stability-2013
Required to build Convert-UUlib since version 1.5 (2015)
- Create rootfile
- Canary::Stability - canary to check perl compatibility for schmorp's
modules
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 1.06 to 1.8
- Update of rootfiles
- Changelog
1.8 Thu Dec 17 02:23:53 CET 2020
- no bugfixes in this release due to lack of known bugs, but the major changes
in this release might have introduced new bugs, so watch out.
- update large decoder example to disable OPT_AUTOCHK and use Smerge -1.
- some micro-optimisations.
- avoid costly string comparisons by comparing hashes when isnerting items,
which speeds up insertion by a constant factor.
- improve uulist (and other) structure layout and size.
- reverse the order of file list items, which heuristically improves
match speed with large usenet file lists.
- use getc instead of fgetc, which makes no difference on gnu/linux.
- clean up _FP symbol names toi not start with an underscore.
- use feof_unlocked and ferror_unlocked.
- implement a faster ascii-only strnicmp.
- misc very minor code improvements.
- remove quite a bit of pre-posix/dos/etc. cruft.
- use flockfile, if available, for a potential but small
speed gain.
- speed up inner yenc decoder loop.
- kentnl said that this module should no longer claim to be a simple
interface to uulib, as the bunndled copy is now better maintained
than the original upstream library.
1.71 Tue Mar 17 00:54:06 CET 2020
- backport to c89 (patch by Paul Howarth).
1.7 Sat Feb 29 22:07:54 CET 2020
- new function: GetFileList.
- experimental perlmulticore support (see manpage).
- Initialize is now a NOP and CleanUp automatically initializes again.
- updated example decoder and documentation a bit.
- include ecb.h to deal with compiler builtins and endianness.
- some further µ-optimisations in hot code, especially for yEnc.
- replace crc32 function by slice-by-16 version by Stephan Brumme,
which should speed up yEnc en-/decoding.
- yEnc: do not calculate two crcs per part, instead, combine
the part crcs together to form the file crc.
- yEnc: allow pcrc= in addition to pcrc32= for yenc trailers, as
some draft mentions both and it is actually in active use.
- yEnc: ignore crc32= on multiparts, except on the last part,
which avoids spurious corruption warnings.
- be more precise in documenting code licenses in COPYING.
- convert constant creation to the method I normally use.
- use common::sense.
1.62 Mon Feb 17 23:19:42 CET 2020
- major performance improvement by simplifying code in _FP_gets
to not use fscanf. This might slow things down on platforms
with very slow fgetc.
1.61 Sun Feb 9 18:38:29 CET 2020
- lint uulib: fix some format string type mismatches
and some other minor issues.
1.6 Thu Oct 24 17:11:54 CEST 2019
- fix heap overflow (testcase by Noel Duffy, reported
by Robert Scheck). The defense-in-depth mechanism based
on mmap should make this unexploitable for other than denial
of service, on systems supporting mmap/mprotect.
1.5 Sat Jul 11 03:56:06 CEST 2015
- fix a heap overflow (testcase by Krzysztof Wojtaś).
- on systems that support it (posix + mmap + map_anonymous),
allocate all dynamic areas via mmap and put four guard
pages around them, to catch similar heap overflows
safely in the future.
- find a safer way to pass in CC/CFLAGS to uulib.
- added stability canary support.
1.4 Sun May 29 17:17:01 CEST 2011
- avoid a classical buffer overflow in case a progress
message is too long.
- this release adds dependencies for snprintf/vsnprintf.
- some uuencode encoders do not generate a final "space" line
before the "end" marker, so do not rely on the line to be there.
1.34 Tue Dec 14 22:20:00 CET 2010
- fix a one-byte-past-end-write buffer overflow in UURepairData
(reported, analysed and testcase provided by Marco Walther).
- quoted-printable decoding was completely broken, try a fix.
1.33 Wed Oct 28 09:04:38 CET 2009
- handle yEnc files with part end=0 and total= more gracefully.
I wish yEnc had been created by somebody who knows;
what he does;
but I doubt he even knows;
what he did.
1.32 Wed Sep 16 20:07:13 CEST 2009
- Due to a glitch with CVS, configure lacked executable bits.
(Quickly reported by Anton Berezin).
1.31 Wed Sep 16 09:04:30 CEST 2009
- do not use system-replacements for case-insensitive string
functions when found, as they are broken on too many systems
(mostly bsds, as usual, but at least some versions of GNU/Linux
disagree with themselves apparently). Analyzed by Anton Berezin.
1.3 Sat Aug 29 01:24:35 CEST 2009
- major changes, new bugs and changes in decoding behaviour are
expected (but not intended).
- major scanning and decoding speed-up (by a factor of 4),
by replacing ultra-slow _FP_gets and improving IsKnownHeader
(but fgets is *still* responsible for >50% if the time).
- new option OPT_AUTOCHECK to disable O(n) UUCheckGlobalList
call after every loadfile, majorly speeds up large decodes
(easily by a factor of 10..100).
- allow "Smerge -1" to call UUCheckGlobalList.
- majorly speed up part insertion (still O(n), but much faster).
- allow for 1023 octet headers instead of the standard
255 octet ones.
- support strcasestr, strcasecmp, strncasecmp for added speed.
1.12 Mon Oct 13 14:11:01 CEST 2008
- use the yencode filesize as additional matching criterium
to avoid false matches.
- made the example decoder more verbose w.r.t. error handling.
- removed potentially confusing decode_temp calls from
example decoder.
1.11 Fri Jun 13 15:32:30 CEST 2008
- don't ask.
1.10 Fri Jun 13 14:22:42 CEST 2008
- fix an infinite-looping problem when scanning in freestyle
mode (testcase provided by Pieter Geens and Reinhard Pfau).
1.09 Fri May 25 19:38:11 CEST 2007
- create something sensible, trust a windows program to fuck
it up: work around literal "(null)" filenames in yenc-encoded
files.
- some minor cleanups.
1.08 Sat Dec 16 23:27:13 CET 2006
- URGENT update, the last release did not
decode files correctly, usually not at all.
- my last patch was, of course, completely bogus.
(sorry. looked simple...).
1.07 Sun Dec 10 17:41:46 CET 2006
- fixed an uninitialised variable based on analysis
and patch by Mark Martinec.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update of glib resulted in additional files in the poppler rootfile
which has been updated in this patch
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 2.54.3 to 2.68.1
- Update rootfile
- glib-2.54.3-compile-fixes-1.patch not required, all changes now
incorporated in the source tarball
- meson/ninja have replaced autotools
- As so's updated ran find-dependencies
No additional programs flagged up
- Changelog is too large to include here
Full details can be viewed in the NEWS file in the source tarball
Large number of bugs fixed
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 3-4-0 to 3-6-0
- Update of rootfilers in each architecture
Only the library version changed in each rootfile
- Installed updated lm_sensors. Confirmed updated version was installed.
sensors-detect ran successfully but could not confirm successful sensor
detection as installation was run on vm testbed and this has no sesnors
Testing on real hardware to confirm that sensors are detected and
sensor-* directories correctly created in IPFire.
- Changelog
3.6.0 (2019-10-18)
configs: Added a number of new configuration files
fancontrol: AVERAGE env variable can be used to set the number of previ>
Makefile: The MACHINE variable has been renamed to ARCH
sensord: Add an option -1/--oneline to print chip and adapter on the sa>
sensors: Fixed a stray comma bug in the JSON output
Fixed Fahrenheit conversion with raw and JSON output
Scale voltage and current values in the default output format
sensors-detect: Add detection of AMD Family 17h, models 30h, 70h
Add detection of some AMD Family 15h models
Add detection of AMD Family 16h model 30h power sensors
Add detection of Hygon Family 18h thermal sensors
Add detection of Nuvoton NCT6797D
Add detection of Nuvoton NCT6798D
Add detection of Nuvoton NCT6112D/NCT6114D/NCT6116D
Fix printing CPU info on non-x86 arches
Fix printing lm_sensors version
Mark Fintek F75387SG/RG as supported by the f75375s dri>
3.5.0 (2018-11-23)
Fixed disappearance of certain hwmon chips with 4.19+ kernels
Add the find-driver script for debugging
Various documentation and man page improvements
Fix various issues found by Coverity Scan
Fix compilation with the musl C library
Development version string now contains "+git" instead of "+SVN"
Updated links in documentation to reflect the new home of lm_sensors
sensors.1: Add reference to sensors-detect
Document -j option (json output)
sensors: Add support for json output
Add support for power min, lcrit, min_alarm, lcrit_alarm
sensors-detect: Fix systemd paths
Add detection of Fintek F81768
Only probe I/O ports on x86
Add detection of Nuvoton NCT6793D
Add detection of Microchip MCP9808
Mark F71868A as supported by the f71882fg driver
Mark F81768D as supported by the f71882fg driver
Mark F81866D as supported by the f71882fg driver
Add detection of various ITE chips
Add detection of Nuvoton NCT6795D
Add detection of DDR4 SPD
Add detection of ITE IT8987D
Add detection of AMD Family 17h temperature sensors
Add detection of AMD KERNCZ SMBus controller
Add detection of various Intel SMBus controllers
Add detection of Giantec GT30TS00
Add detection of ONS CAT34TS02C and CAT34TS04
Add detection of AMD Family 15h Model 60+ temperature s>
Add detection of Nuvoton NCT6796D
Add detection of AMD Family 15h Model 70+ temperature s>
configs: Add sample configuration files.
sensors.conf.default: Add hardwired inputs of NCT6795D
Add hardwired inputs of F71868A
Add hardwired NCT6796D inputs
vt1211_pwm: replaced deprecated sub shell syntax
run with bash instead of sh
pwmconfig: replaced deprecated sub shell syntax
fancontrol: replaced deprecated sub shell syntax
save original pwm values
fancontrol.8: replaced deprecated sub shell syntax
libsensors: Add support for SENSORS_BUS_TYPE_SCSI
Add support for power min, lcrit, min_alarm, lcrit_alarm
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 2.2.0 (2016) to 2.3.0 (2021)
- Update of rootfile
- Changelog is too large to include here
Full details can be viewed in the Changes file in the source tarball
Large number of bug fixes
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- id3tag.pc pkgconfig file required for mpd-0.22.6 to find libid3tag
library files
- Update of rootfile
- update lfs to install id3tag.pc file to /usr/lib/pkgconfig directory
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 1.6.18 to 1.14.5
- Update required for successfgul build of mpd-0.22.6
- Update of rootfile
- Changelog is too large to include here
Full details can be found in the ChangeLog file in the source tarball
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 0.19.19 to 0.22.6
- Update rootfile
- Required update of libupnp
- Autotools no longer available
Build changed to meson
Meson build required addition of pkgconfig file for libid3tag
- Changelog is too large to include here.
Full details can be found in the NEWS file in the source tarball
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is the first ppp release for years, and the project appears to have
a different maintainer (team?) by now. As a result, some of our patches
are no longer necessary as they made it into upstream, while others need
to be adjusted slightly.
In addition, their configure script does not handle commas in CFLAGS
properly, which is why the delimiter for the 'sed' call in it has to be
changed to something neither appearing in a path nor in our CLFAGS set.
The full changelog of this release can be retrieved from
https://ppp.samba.org/README.html and says:
* Support for new EAP (Extensible Authentication Protocol) methods:
- Support for EAP-TLS, from Jan Just Keijser and others
- Support for EAP-MSCHAPv2, from Eivind Næss, Thomas Omerzu, Tijs
Van Buggenhout and others
* New pppd options:
- chap-timeout
- chapms-strip-domain
- replacedefaultroute
- noreplacedefaultroute
- ipv6cp-accept-remote
- lcp-echo-adaptive
- ip-up-script
- ip-down-script
- ca
- capath
- cert
- key
- crl-dir
- crl
- max-tls-version
- need-peer-eap
* Fixes for CVE-2020-8597 and CVE-2015-3310.
* libpcap is now required when compiling on Linux (previously, if
libpcap was not present, pppd would be compiled without packet
filtering support).
* The rp-pppoe plugin has been renamed to pppoe, to distinguish it
from the upstream rp-pppoe code. Its options have changed names,
but the old names are kept as aliases.
* The configure script now supports cross-compilation.
* Many bug fixes and cleanups.
Thanks to Michael for his hint on the ./configure CFLAGS issue.
The second version of this patch correctly updates the
src/patches/ppp/0013-everywhere-O_CLOEXEC-harder.patch patch for the
second hunk in pppd/main.c, where socket permissions have been changed
meanwhile.
Further, it has been successfully tested against a VDSL 100 line in
Germany, using PAP to Easybell via 1&1 L2 BSA. No connectivity issues or
other anomalies have been observed so far.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 0.4.9 to 0.4.10
- Update rootfile
- There is no Changelog file in the source tarball
The poppler website has no release info on poppler-data only poppler
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 0.89.0 to 21.04.0
From Aug 2020 file version naming changed to YY.MM.x
Update issued every month since then
- Update rootfile
- Changelog is too large to include here
Full content can be reviewed in ChangeLog file in source tarball
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 5.0 with patch 18 to 5.1 wih patch 4
- Remove old bash50 patches
- Update rootfiles
- Add new bash51 patches
- Installed updated version in a vm testbed system
All bash commands that were run, executed correctly
Script created to redirect output to a file and ran correctly
- Changelog
1. New Features in bash-5.1 since release of bash-5.0
a. `bind -x' now supports different bindings for different editing modes and
keymaps.
b. Bash attempts to optimize the number of times it forks when executing
commands in subshells and from `bash -c'.
c. Here documents and here strings now use pipes for the expanded document if
it's smaller than the pipe buffer size, reverting to temporary files if it's
larger.
d. There are new loadable builtins: mktemp, accept, mkfifo, csv, cut/lcut
e. In posix mode, `trap -p' now displays signals whose disposition is SIG_DFL
and those that were SIG_IGN when the shell starts.
f. The shell now expands the history number (e.g., in PS1) even if it is not
currently saving commands to the history list.
g. `read -e' may now be used with arbitrary file descriptors (`read -u N').
h. The `select' builtin now runs traps if its internal call to the read builtin
is interrupted by a signal.
i. SRANDOM: a new variable that expands to a 32-bit random number that is not
produced by an LCRNG, and uses getrandom/getentropy, falling back to
/dev/urandom or arc4random if available. There is a fallback generator if
none of these are available.
j. shell-transpose-words: a new bindable readline command that uses the same
definition of word as shell-forward-word, etc.
k. The shell now adds default bindings for shell-forward-word,
shell-backward-word, shell-transpose-words, and shell-kill-word.
l. Bash now allows ARGV0 appearing in the initial shell environment to set $0.
m. If `unset' is executed without option arguments, bash tries to unset a shell
function if a name argument cannot be a shell variable name because it's not
an identifier.
n. The `test -N' operator uses nanosecond timestamp granularity if it's
available.
o. Bash posix mode now treats assignment statements preceding shell function
definitions the same as in its default mode, since POSIX has changed and
no longer requires those assignments to persist after the function returns
(POSIX interp 654).
p. BASH_REMATCH is no longer readonly.
q. wait: has a new -p VARNAME option, which stores the PID returned by `wait -n'
or `wait' without arguments.
r. Sorting the results of pathname expansion now uses byte-by-byte comparisons
if two strings collate equally to impose a total order; the result of a
POSIX interpretation.
s. Bash now allows SIGINT trap handlers to execute recursively.
t. Bash now saves and restores state around setting and unsetting posix mode,
instead of having unsetting posix mode set a known state.
u. Process substitution is now available in posix mode.
v. READLINE_MARK: a new variable available while executing commands bound with
`bind -x', contains the value of the mark.
w. Bash removes SIGCHLD from the set of blocked signals if it's blocked at shell
startup.
x. `test -v N' can now test whether or not positional parameter N is set.
y. `local' now honors the `-p' option to display all local variables at the
current context.
z. The `@a' variable transformation now prints attributes for unset array
variables.
aa. The `@A' variable transformation now prints a declare command that sets a
variable's attributes if the variable has attributes but is unset.
bb. `declare' and `local' now have a -I option that inherits attributes and
value from a variable with the same name at a previous scope.
cc. When run from a -c command, `jobs' now reports the status of completed jobs.
dd. New `U', `u', and `L' parameter transformations to convert to uppercase,
convert first character to uppercase, and convert to lowercase,
respectively.
ee. PROMPT_COMMAND: can now be an array variable, each element of which can
contain a command to be executed like a string PROMPT_COMMAND variable.
ff. `ulimit' has a -R option to report and set the RLIMIT_RTTIME resource.
gg. Associative arrays may be assigned using a list of key-value pairs within
a compound assignment. Compound assignments where the words are not of
the form [key]=value are assumed to be key-value assignments. A missing or
empty key is an error; a missing value is treated as NULL. Assignments may
not mix the two forms.
hh. New `K' parameter transformation to display associative arrays as key-
value pairs.
ii. Writing history to syslog now handles messages longer than the syslog max
length by writing multiple messages with a sequence number.
jj. SECONDS and RANDOM may now be assigned using arithmetic expressions, since
they are nominally integer variables. LINENO is not an integer variable.
kk. Bash temporarily suppresses the verbose option when running the DEBUG trap
while running a command from the `fc' builtin.
ll. `wait -n' now accepts a list of job specifications as arguments and will
wait for the first one in the list to change state.
mm. The associative array implementation can now dynamically increase the
size of the hash table based on insertion patterns.
nn. HISTFILE is now readonly in a restricted shell.
oo. The bash malloc now returns memory that is 16-byte aligned on 64-bit
systems.
pp. If the hash builtin is listing hashed filenames portably, don't print
anything if the table is empty.
qq. GLOBIGNORE now ignores `.' and `..' as a terminal pathname component.
rr. Bash attempts to optimize away forks in the last command in a function body
under appropriate circumstances.
ss. The globbing code now uses fnmatch(3) to check collation elements (if
available) even in cases without multibyte characters.
tt. The `fg' and `bg' builtins now return an error in a command substitution
when asked to restart a job inherited from the parent shell.
uu. The shell now attempts to unlink all FIFOs on exit, whether a consuming
process has finished with them or not.
vv. There is a new contributed loadable builtin: asort.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Updated from 8.0 with patch 1 to 8.1 with no patches
- Commented out the patch section in the lfs as no current patches
When patches are issued then the patch section can be uncommented
- Update rootfiles
- Remove old readline patches
- Changelog
New Features in readline-8.1 since the release of readline-8.0
a. If a second consecutive completion attempt produces matches where the first
did not, treat it as a new completion attempt and insert a match as
appropriate.
b. Bracketed paste mode works in more places: incremental search strings, vi
overstrike mode, character search, and reading numeric arguments.
c. Readline automatically switches to horizontal scrolling if the terminal has
only one line.
d. Unbinding all key sequences bound to a particular readline function now
descends into keymaps for multi-key sequences.
e. rl-clear-display: new bindable command that clears the screen and, if
possible, the scrollback buffer (bound to emacs mode M-C-l by default).
f. New active mark and face feature: when enabled, it will highlight the text
inserted by a bracketed paste (the `active region') and the text found by
incremental and non-incremental history searches. This is tied to bracketed
paste and can be disabled by turning off bracketed paste.
g. Readline sets the mark in several additional commands.
h. Bracketed paste mode is enabled by default. There is a configure-time
option (--enable-bracketed-paste-default) to set the default to on or off.
i. Readline tries to take advantage of the more regular structure of UTF-8
characters to identify the beginning and end of characters when moving
through the line buffer.
j. The bindable operate-and-get-next command (and its default bindings) are
now part of readline instead of a bash-specific addition.
k. The signal cleanup code now blocks SIGINT while processing after a SIGINT.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 2.1.2 to 2.1.3 - fix for bug #12602
Updated addon installed and fix confirmed
- Update rootfile
- Changelog
Address issue where a test server may return an HTTP error during upload or download
Address issue where ignore_ids may be empty or have empty values
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This has been broken because of other changes on the network scripts and
since we now have support for bridges there is no point in supporting
something else that has the same functionality.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
