In order to use the highest two bits for surciata bypass, we will need
to make sure that whenever we compare any other marks, we do not care
about anything else.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Patch created to convert all python modules to python3 compatibility that need it.
2to3 converter used for this.
- Start initscript changed to use python3
- No change required in rootfile
- Execution of patch added to lfs file
- Tested in vm machine. WUI page showed the same as with the python version.
scan of directory for mp3 (.flac) files was successful. Could not test actual audio
playing capability as my vm testbed does not have any audio setup at this time.
I believe that the purpose of client175 is to provide the WUI page and for that my
testing seemed to show everything working as expected.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Since systemd, many programs no longer behave like a well-behaved
daemon. To avoid any extra solutions, this patch adds a -b switch which
will start a program in the background and throw away any output.
The behaviour remains unchanged for any other programs.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
AWS for some time now has a serial console feature which is enabled by
default on all systems. The VGA console is not enabled for any new
non-x86 instance types and not interactive.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
we have no supported armv5tel board left so we can switch to the higher
arch. This now can use the vpu (still in softfp calling convention to
not break existing installations.)
this fix many compile problems, also boost is now working again.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
with kernel 5.10 dhcpcd hung at shutdown if red was a wireless client
becuase there was two running instances. This change repeat the
dcpcd -k call.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This package has not received any updates or attention within the last
three years. It's sole known upstream URL (https://ssl.bulix.org/projects/lcd4linux/)
returns a HTTP error 404 nowadays, and the author was unable to locate
any upstream source that appears to be still maintained today.
Given the status quo, bugs in lcd4linux cannot be reported properly,
security issues won't be addressed (by anybody else then ourselves), and
technical questions cannot be clarified aside a reverse engineering
approach.
We should not allow such an add-on to be installed on a firewall system.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
start, restart and reload will now be prohibited if the configuration
file has an incorrect syntax. This avoids killing a running daemon and
is showing an indication to the user instead of having the daemon dying
silently in the background.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
These include rootfiles, firewall menue entries that have been
unmaintained for a long time, and firewall chains which were never used
in recent time.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- What is it?
pmacct is a monitoring tool for network management tasks. Data collected
can be used for analysis and troubleshooting purposes to maintain the
health of the network. pmacct can collect, replicate and export network
information. It can cache in memory tables, store persistently to SQLite3
and output to flat-files like CSV, formatted, and JSON.
- Why is it needed?
To monitor data usage (IP-based or MAC-based data accounting) down to the
client level. Net-Traffic will monitor traffic for the entire RED, GREEN,
etc. networks, but it cannot pinpoint which client is using lots of data.
Connections will take a snapshot but not show day by day sums. pmacct can
help admins keep tabs on users that use too much data.
- What are the use cases?
An ISP may implement data caps and if the limit is over-run then you have
to pay for every additional xxGB of data used. Typical charges can be
around $10 per 50GB. With pmacct you can identify the high users and take
action, hopefully before the limit is breached.
- This is being introduced as a command line only tool. However, at a later
date, if it is useful to enough additional users a WUI page could be
developed as discussed in the development mailing list
https://lists.ipfire.org/pipermail/development/2021-January/009174.html
- Changes in V2 version
- Initscript is using IPFire template and installed with IPFire method.
- All other daemons except pmacct and pmacctd have been removed from the install.
- Example conf files have been removed from /etc/pmacct
Both example conf files are described in the pmacct wiki draft.
Tested-by: Jon Murphy <jon.murphy@ipfire.org>
Signed-off-by: Jon Murphy <jon.murphy@ipfire.org>
Signed-off-by: Erik Kapfer <ummeegge@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
With wireless device as members in bridges, we cannot predict the name
very well. So we will use the MAC address and find the correct device
name when we launch hostapd.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The initscript it setting a lot of options which are set by hostapd
which will fail to start the AP instead of using fire-and-forget.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Fix for Bug 12445: There is no proper way to distinguish between MS Azure and a local
Hyper-V installation Procedure: try to get the metadata info from the
internal MS metadata service at IP 169.254.169.254 If this fails the system
is running on an local Hyper-V instance wget takes too long to exit if the IP
is not reachable Added --timeout and --tries param to wget to reduce the
duation from 8 minutes to 9 seconds 9 seconds at one try should be enough
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Thomas Cekal <admin@cekal.org>
"wireless extensions" is the old interface to speak to the kernel.
All newer drivers support nl80211 now.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The SSH init script only kills the main daemon which leads to any child
processes (for remaining connections) being untouched.
killproc returns 4 (unknown error) when not all processes were killed
which is not intended here. Therefore we ignore the error and do not
pause the shut down process for a minute.
Fixes: #12544
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Newer kernels seem to return this in lowercase format which makes the
comparison to "EC2" fail.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Bacula install used the bacula initscript for starting and stopping bacula.
This works fine but results in no pid or memory input in the addons table
under services.
Using the IPFire initscript also successfully starts and stops bacula with
no problems but also provides the pid and memory information in the services
addons table.
- rootfiles adjusted to remove the reference to bacula-ctl-fd
- lfs/bacula adjusted to remove the init.d/bacula link generation
remove the "rm -f /root/.rnd" command. This file is not present
and I have not seen this command in any other lfs file that I
have looked at.
- new bacula initscript created
Signed-off-by: Adolf Belka <ahb.ipfire@gmail.com>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
When safe search is enabled, it is being enabled on YouTube, too.
This creates problems in some scenarios like schools where politics
is being tought as well as other subjects that might be censored by
YouTube (i.e. election TV spots).
Therefore it is now possible to exclude YouTube from Safe Search
but keep it enabled for the search engines.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The SSH daemon was not terminated properly because killproc
tried to terminate all processes with that name. That caused
that the master daemon respawned some processed which were
therefore not killed because killproc determined a list of
PIDs only once before starting sending signals.
This patch only kills the master process which is being
determined by using sshd's pid file.
That results in all established connections not being
interrupted any more.
Furthermore, the loadproc function checks if any processes
with the given name are already running which could be true
if there are any connections still open.
That check is being disabled with the -f switch and sshd
will always be launched.
"/etc/init.d/sshd stop" might now print FAIL if only the
master process, but no connection processes were terminated.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This package has not been maintained well and is thereof outdated. At
the time of writing, we neither
(a) have a maintainer for this nor
(b) believe it is wise to run a full-featured content scanner on a
firewall for security purposes. (We can make do with Postfix, as it
is known for being a very robust MTA and providess less attack
surface than something actually inspecting transferred messages.)
Thereof, this patch drops the SpamAssassin add-on. In case it is desired
in future versions of IPFire, it can be easily reverted, restoring the
functionality and behaviour before.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This package has not been maintained well and is thereof outdated. At
the time of writing, we neither
(a) have a maintainer for this nor
(b) believe it is wise to run a full-featured content scanner on a
firewall for security purposes. (We can make do with Postfix, as it
is known for being a very robust MTA and providess less attack
surface than something actually inspecting transferred messages.)
Thereof, this patch drops the Amavis add-on. In case it is desired in
future versions of IPFire, it can be easily reverted, restoring the
functionality and behaviour before.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This variable is no longer being used and was only used to
assign IP addresses to the individual interfaces.
However, the kernel knows best which IP address to select
as broadcast address for each network. Therefore we depend
on the kernel which allows us to support RFC3021.
Fixes: #12486 - no /31 transfer net available on red
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
