- Update from version 10.42 to 10.43
- Update of rootfile
- Changelog
10.43
There are quite a lot of changes in this release (see ChangeLog and git log for
a list). Those that are not bugfixes or code tidies are:
* The JIT code no longer supports ARMv5 architecture.
* A new function pcre2_get_match_data_heapframes_size() for finer heap control.
* New option flags to restrict the interaction between ASCII and non-ASCII
characters for caseless matching and \d and friends. There are also new
pattern constructs to control these flags from within a pattern.
* Upgrade to Unicode 15.0.0.
* Treat a NULL pattern with zero length as an empty string.
* Added support for limited-length variable-length lookbehind assertions, with
a default maximum length of 255 characters (same as Perl) but with a function
to adjust the limit.
* Support for LoongArch in JIT.
* Perl changed the meaning of (for example) {,3} which did not used to be
recognized as a quantifier. Now it means {0,3} and PCRE2 has also changed.
Note that {,} is still not a quantifier.
* Following Perl, allow spaces and tabs after { and before } in all Perl-
compatible items that use braces, and also around commas in quantifiers. The
one exception in PCRE2 is \u{...}, which is from ECMAScript, not Perl, and
PCRE2 follows ECMAScript usage.
* Changed the meaning of \w and its synonyms and derivatives (\b and \B) in UCP
mode to follow Perl. It now matches characters whose general categories are L
or N or whose particular categories are Mn (non-spacing mark) or Pc
(combining punctuation).
* Changed the default meaning of [:xdigit:] in UCP mode to follow Perl. It now
matches the "fullwidth" versions of hex digits. PCRE2_EXTRA_ASCII_DIGIT can
be used to keep it ASCII only.
* Make PCRE2_UCP the default in UTF mode in pcre2grep and add -no_ucp,
--case-restrict and --posix-digit.
* Add --group-separator and --no-group-separator to pcre2grep.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from 5.13 to 6.8
- Update of rootfile
- make on its own no longer needed. It goes straight to make install
- Changelog can be seen by reviewing the Changes file in each source tarball.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from version 4.9.0 to 4.9.1
- Update of rootfile
- Changelog
4.9.1
* Support stop/parity bits on serial port (#23952)
* Add needed system headers in checks and return values
for implicit function declarations
* Fixes:
- Avoid zombies after shell exit (#25089)
- Missed signal sending permission check on failed
query messages (CVE-2023-24626)
- manpage fixes
- source code fixes during cleanup
- UTF-8 encoding can emit invalid UTF-8 sequences
for out of range unicode values (#62097)
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from version 1.6.0 to 1.6.1
- Update of rootfile
- Removal of patch for as changes now incorporated in source tarball.
- Changelog
1.6.1
build: fail if specified configure options cannot be satisfied.
pam_env: fixed --disable-econf --enable-vendordir support.
pam_unix: do not warn if password aging is disabled.
pam_unix: try to set uid to 0 before unix_chkpwd invocation.
pam_unix: allow empty passwords with non-empty hashes.
Multiple minor bug fixes, build fixes, portability fixes,
documentation improvements, and translation updates.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from version 2.5.1 to 2.6.4
- Update of rootfile
- Changelog
2.6.4
Use AX_ADD_FORTIFY_SOURCE to avoid redefining _FORTIFY_SOURCE by
@thesamesam in #103
Do not look up include files in the current working directory by
@DaanDeMeyer in #105
2.6.3
libkfont:
Don't look for fonts in the current directory.
showkey:
Add parameter to allow to change timeout.
po:
Update po files.
2.6.2
loadkeys:
Don't look for keymap in the current directory.
keymaps:
Add colemak mod-dh keymaps.
2.6.1
libkfont:
Fix font saving from linux kernel if KD_FONT_OP_GET_TALL is available.
Respect font height when writing psf2 header.
keymaps:
Create new 'mac-fr' layout for contemporary French Macs.
2.6.0
libkfont:
Leverage KD_FONT_OP_GET/SET_TALL font operations. The new
KD_FONT_OP_GET/SET_TALL font operations allow to load fonts taller
than 32 pixels by dropping the VGA-specific vertical pitch limitation
(requires kernel 6.2 or later).
Use threadsafe strtok_r.
Increase soname version.
setvtrgb:
Fix read from pipe. The pipe is not rewindable, but we don't really
need to rewind() but we need to unread one character.
keymaps:
i386/dvorak/dvorak-de.map: Add dvorak-de.map from console-data.
i386/qwerty/is-latin1.map: the circumflex should also be available in
its original level-3 position.
i386/qwerty/la-latin1.map: Convert the characters expressed in Latin-1
to the named constants, to ease up transition to Unicode.
pine/en.map: New version of pinephone keyboard map file.
unimaps:
Add mapping for U+25CF. The unicode maps in font files like
eurlatgr.psfu and cp850-8x16.psfu have an entry for U+25CF, but the
plaintext unimap files do not.
tests:
Use strace to track syscalls. Now strace is powerful enough to show
ioctls specific to console configuration.
po:
Update translations (from translationproject.org).
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Updatre from version 2.14 to 2.15
- Update of rootfile
- Changelog
2.15
* Fix operation of --no-absolute-filenames --make-directories
* Restore access and modification times of symlinks in copy-in
and copy-pass modes.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
We should not have any configuration files that we share in this place,
therefore this patch is moving it into /usr/share/openvpn where we
should be able to update it without any issues.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This architecture does not seem to be support and since we don't support
this as a primary architecture just yet, we will build without this
package.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- hyperscan will move from BSD licence to a proprietary paid for licence from version 5.5
onwards.
- hyperscan will be replaced by vectorscan, a fork of hyperscan.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- It has been announced that from hyperscan-5.5 onwards the licence for this package
will change from BSD tp proprietarty paid for version
- This patch submission installs vectorscan whihc was created as a fork from hyperscan
andf that is being maintained and has indicated it will suay Open Source
- Created new lfs file
- Created nbew rootfile. This looks to match the hyperscan rootfile closely
- Added vector scan to the make.sh file and removed hyperscan from it.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Changelog according to the tarball's NEWS file:
- Improvements
- Use any hash algo known by kernel/openssl instead of keep needing
to update the mapping
- Teach kmod to load modprobe.d/depmod.d configuration from ${prefix}/lib
and allow it to be overriden during build with --with-distconfdir=DIR
- Make kernel modules directory configurable. This allows distro to
make kmod use only files from /usr regardless of having a compat
symlink in place.
- Install kmod.pc containing the features selected at build time.
- Install all tools and symlinks by default. Previously kmod relied on
distro packaging to set up the symlinks in place like modprobe,
depmod, lsmod, etc. Now those symlinks are created by kmod itself
and they are always placed in $bindir.
- Bug Fixes
- Fix warnings due to -Walloc-size
- Others
- Drop python bindings. Those were not update in ages and not compatible
with latest python releases.
- Cleanup test infra, dropping what was not used anymore
- Drop experimental tools `kmod insert` / `kmod remove`. Building those
was protected by a configure option never set by distros. They also
didn't gain enough traction to replace the older interfaces via
modprobe/insmod/rmmod.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- sslh is listed in the initscripts lfs and rootfiles.
- Removal of these references with the bremoval of sslh
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.16.49/doc/arm/html/notes.html#notes-for-bind-9-16-49
"Bug Fixes
A regression in cache-cleaning code enabled memory use to grow
significantly more quickly than before, until the configured
max-cache-size limit was reached. This has been fixed. [GL #4596]
Using rndc flush inadvertently caused cache cleaning to become
less effective. This could ultimately lead to the configured
max-cache-size limit being exceeded and has now been fixed. [GL #4621]
The logic for cleaning up expired cached DNS records was tweaked to be
more aggressive. This change helps with enforcing max-cache-ttl and
max-ncache-ttl in a timely manner. [GL #4591]
It was possible to trigger a use-after-free assertion when the overmem
cache cleaning was initiated. This has been fixed. [GL #4595]"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
grub-btrfs try to reconfigure grub in the buildsystem and print always the bugtracker url on every error even when its not a bug
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
As very simple XS based perl binding for libarchive
to get header data and extract files.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is only a build dependency for perl-Arhive-Peek-Libarchive and
will not be installed on a system
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is only a build dependency for perl-Config-AutoConf and
will not be installed on a system
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- xz version 5.6.0 and 5.6.1 discovered to have been backdoored by what looks to have
been one of the xz devs.
- IPFire looks not to be affected by the problem as we don't patch openssh to be linked
with liblzma
- However due to question marks about what else might be in these 5.6.x versions it is
better to revert back to a version that did not have the build-to-host.m4 file with the
code that modifies the build if it meets certain criteria.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
this file should created by grub-install at installation.
Also it is not present on aarch64 builds of grub.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This kind of grub addon will extend the grub boot menu by a additional
submenu where a BTRFS snapshot can be selected to directly use as root
volume and boot into it.
The grub-btrfsd daemon is using inotify(tools) to watch the snapshot directory for
new or deleted snapshots and calls grub-mkconfig to adjust the snapshot grub submenu
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from version 2.5.0 to commit e1266c7
- Update of rootfile
- When ppp-2.5.0 was released it had a bug bin it that the lock and run directories
had non standard defaults but also that if the directory did not exist ppp just
ignored it and continued to start but would then have error messages in the logs about
not being able to cretae the lock file
- This issue was raised in the ppp github issues and a set of patches merged into ppp.
- The plan was written in Nov 2023 that this would be released as 2.5.1, however nearly
three months later there is no sight of 2.5.1 being released and people continue to
flag up the lock directory issues and have to apply a workaround to create the directory
in local.rc
- This patch has taken the zip source tarball of master at the commit e1266c7. The zip
tarball was then extracted and then tar'd back up as a tar.gz file with the version set
at e1266c7 rather than master. I could not find any other way to get a source tarball\
created at a certain commit stage.
- The patch ppp-2.5.0-2-everywhere-O_CLOEXEC-harder.patch had to be updated due to some
changes in the source files.
- The patch ppp-2.5.0-7-add-configure-check-to-see-if-we-have-struct-sockaddr_ll.patch
was removed as the changes are now built into the source tarball.
- This will need to be tested thoroughly by people with ppp to confirm that the lock
directory is created if it doesn't exist on the system. I can't test that as I have
no access to a ppp connection system.
- For a view of the changelog between 2.5.0 and e1266c7 the github commits list needs to
be reviewed. https://github.com/ppp-project/ppp/commits/master/?before=e1266c76d1ad39f98f11676e34f180f78c5a510c+35
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
