-update arm-trusted firmware to 2.6
-fix mac address generation on R2S because the CPUID fuses are not uniqe
-add support for NanoPi R4S
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
For details (v9.16.22-v9.16.25) see:
https://downloads.isc.org/isc/bind9/9.16.25/doc/arm/html/notes.html#notes-for-bind-9-16-25
"Notes for BIND 9.16.25
Feature Changes
Overall memory use by named has been optimized and reduced,
especially on systems with many CPU cores. The default memory
allocator has been switched from internal to external. A new
command-line option -M internal allows named to be started with the
old internal memory allocator. [GL #2398]
Bug Fixes
On FreeBSD, TCP connections leaked a small amount of heap memory,
leading to an eventual out-of-memory problem. This has been fixed.
[GL #3051]
If signatures created by the ZSK were expired and the ZSK private
key was offline, the signatures were not replaced. This behavior has
been amended to replace the expired signatures with new signatures
created using the KSK. [GL #3049]
Under certain circumstances, the signed version of an inline-signed
zone could be dumped to disk without the serial number of the
unsigned version of the zone. This prevented resynchronization
of the zone contents after named restarted, if the unsigned zone
file was modified while named was not running. This has been fixed.
[GL #3071]
...
"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
For historical reasons, we were always reluctant to reverse path
filtering, since configuration changes were tricky to evaluate for a
larger userbase, IPFire permits a number of complex scenarios, and due
to limited resources.
As a compromise, this patch suggests to enable Loose Reverse Path
Filtering, as specified in RFC 3704 (section 2.4), to gain at least some
security achievement on this end.
To quote from that:
Loose Reverse Path Forwarding (Loose RPF) is algorithmically similar
to strict RPF, but differs in that it checks only for the existence
of a route (even a default route, if applicable), not where the route
points to. Practically, this could be considered as a "route
presence check" ("loose RPF is a misnomer in a sense because there is
no "reverse path" check in the first place).
The questionable benefit of Loose RPF is found in asymmetric routing
situations: a packet is dropped if there is no route at all, such as
to "Martian addresses" or addresses that are not currently routed,
but is not dropped if a route exists.
There is no legitimate reason why we cannot enable this: If IPFire
receives a packet on some interface it cannot route on _any_ interface
at all, there is no sense in processing it.
While testing this change, I was unable to produce a situation where it
actually causes any harm. In theory, it shouldn't do so anyways.
In the future, we will hopefully be able to set these sysctl's to "1",
using Strict Reverse Path Filtering, as specified in RFC 3704 (section
2.2). Doing so was found to work fine in my testing environment as well,
but there is no asymmetric routing in place there.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
- Update from 4.2.1 (2015) to 4.11.1 (2021)
- Update rootfile
- Update patch for suppression of groups installation
- Change default hash from sha512 to yescrypt in lfs and logins.def
- Changelog
* Release 4.11.1
* build: include lib/shadowlog_internal.h in dist tarballs (Sam James)
* Release 4.11
* Handle possible TOCTTOU issues in usermod/userdel (edneville)
* (CVE-2013-4235)
* Use O_NOFOLLOW when copying file
* Kill all user tasks in userdel
* Fix useradd -D segfault (Xi Ruoyao)
* Clean up obsolete libc feature-check ifdefs (Alejandro Colomar)
* Fix -fno-common build breaks due to duplicate Prog declarations
(Adam Sampson)
* Have single date_to_str definition (Alejandro Colomar)
* Fix libsubid SONAME version (Sam James)
* Clarify licensing info, use SPDX.
* Release 4.10
Note: From this release forward, su from this package should be
considered deprecated. Please replace any users of it with su from
util-linux. Please open an issue if there is a problem with that.
We intend to remove it in an upcoming release.
This release features many fixes expecially to the building of
libsubid, some SELinux labeling issues, and a few signaling
issues.
* libsubid fixes (Xi Ruoyao, Serge Hallyn, Iker Pedrosa, Mike Gilbert,
GalaxyMaster, and Luís Ferreira)
* Rename the test program list_subid_ranges to getsubids, write
a manpage, so distros can ship it. (Iker Pedrosa)
* Add libeconf dep for new*idmap (Iker Pedrosa)
* Allow all group types with usermod -G (Iker Pedrosa)
* Avoid useradd generating empty subid range (Iker Pedrosa)
* Handle NULL pw_passwd (Jaroslav Jindrak)
* Fix default value SHA_get_salt_rounds (Mike Gilbert)
* Use https where possible in README (Paul Menzel)
* Update content and format of README (Iker Pedrosa)
* Translation updates (Balint Reczey, Frans Spiesschaert)
* Switch from xml2po to itstool in 'make dist' (Serge Hallyn)
* Fix double frees (Michael Vetter)
* Add LOG_INIT configurable to useradd (Andy Zaugg)
* Add CREATE_MAIL_SPOOL documentation (Andy Zaugg)
* Create a security.md
* Fix su never being SIGKILLd when trapping TERM (Ruihan li)
* Fix wrong SELinux labels in several possible cases (Iker Pedrosa)
* Fix missing chmod in chadowtb_move (GalaxyMaster)
* Handle malformed hushlogins entries (Tobias Stoeckmann)
* Fix groupdel segv when passwd does not exist (François Rigault)
* Fix covscan-found newgrp segfault (Iker Pedrosa)
* Remove trailing slash on hoedir (Ed Neville)
* Fix passwd -l message - it does not change expirey (Ed Neville)
* Fix SIGCHLD handling bugs in su and vipw (Tobias Stoeckmann)
* Remove special case for "" in usermod (Alejandro Colomar)
* Implement usermod -rG to remove a specific group
(Andy Zaugg)
* call pam_end() after fork in child path for su and login
(Björn Fischer)
* useradd: In absence of /etc/passwd, assume 0 == root
(Ludwig Nussel)
* lib: check NULL before freeing data (Iker Pedrosa)
* Fix pwck segfault (Iker Pedrosa)
* Release 4.9
2021-07-22 Serge Hallyn <serge@hallyn.com>
* Updated translations (Björn Esser, Juergen Hoetzel)
* Major salt updates (Björn Esser)
* Various coverity and cleanup fixes (Iker Pedrosa)
* Consistently use 0 to disable PASS_MIN_DAYS in man (tzccinct)
* Implement NSS support for subids and a libsubid (Serge Hallyn)
* setfcap: retain setfcap when mapping uid 0 (Christian Brauner)
* login.defs: include HMAC_CRYPTO_ALGO key (Iker Pedrosa)
* selinux fixes (Christian Göttsche)
* Fix path prefix path handling (Lucas Servén Marín)
* Manpage updates (tzccinct, Sevan Janiyan, Iker Pedrosa, Geert Ijewski,
谭九鼎, Jamin W. Collins, towerpark, andydna, Frans Spiesschaert)
* Treat an empty passwd field as invalid (Haelwenn Monnier)
* newxidmap: allow running under alternative gid (Martijn de Gouw)
* usermod: check that shell is executable (Geert Ijewski)
* Add yescript support (Rodolphe Bréard)
* useradd memleak fixes (whzhe)
* useradd: use built-in settings by default (Ludwig Nussel)
* getdefs: add foreign (non-shadow-utils) items (Karel Zak)
* buffer overflow fixes (Tobias Stoeckmann)
* Adding run-parts style for pre and post useradd/del (ed@s5h.net)
2020-01-23 Serge Hallyn <serge@hallyn.com>
* selinux: inclue stdio (Michael Vetter)
* man: don't suggest making groupmems user-writeable (Michael Weiser)
* Makefile: bail out on error in for loops (Wolfgang Bumiller)
* Adding logging of SSH_ORIGINAL_COMMAND to nologin. (ed@s5h.net)
* add new HOME_MODE login.defs option (Duncan Overbruck)
* Add tty logging to useradd (ed@s5h.net)
* Useradd: make non-executable shell check only a warning (Tomas Mraz)
* Update Dutch translation (Frans-Spiesschaert)
* user_busy: Do not mistake a regular user process for a namespaced one (Tomas Mraz)
* Revert "Honor --sbindir and --bindir for binary installation" Patrick McLean)
2019-12-20 Dave Reisner <dreisner@archlinux.org>
* Do not auto-enable acct_tools_setuid just because
pam is enabled. NOTE - any distros which are relying
on this behavior will need to switch to configure
--enable-account-tools-setuid
* Release 4.8
2019-12-01 Serge Hallyn <serge@hallyn.com>
* Initial optional bcrypt support.
* Make build/install of 'su' optional.
* Fix for vipw not resuming correctly when suspended
* Sync password field descriptions in manpages
* Check for valid shell argument in useradd
* Allow translation of new strings through POTFILES.in
* Migrate to itstool for translations
* Migrate to new SELinux api
* Support --enable-vendordir
* pwck: Only check homedir if set and not a system user
* Support nonstandard usernames
* sget{pw,gr}ent: check for data at EOL
* Add YYY-MM-DD support in chage
* Fix failing chmod calls for suidubins
* Fix --sbindir and --bindir for binary installations
* Fix LASTLOG_UID_MAX in login.defs
* Fix configure error with dash
* Release 4.7
2019-06-13 Serge Hallyn <serge@hallyn.com>
* Spawn: don't loop forever on ECHILD
* Do not fail locking if there is a stale lockfile Tomas Mraz)
* Use lckpwdf if prefix not set (Tomas Mraz)
* Build: check correct DocBook version (Jan Tojnar)
* Usermod: Print 'no changes' to stdout, not stderr (Serge Hallyn)
* Add support for btrfs subvolumes for home (Adam Majer)
* Fix chpasswd long line handling (Nathan Ruiz)
* Use secure_getenv for gettime (Chris Lamb)
* Make sp_lstchg reproducible (Chris Lamb)
* Do not crash commonio_close if db file is not open (Tomas Mraz)
* Don't flush nscd and sssd cache in read-only mode (Charlie Vuillemez)
* French manpage update (Alban VIDAL)
* Fix manpage defaults for SUB_UID/GID_COUNT (Tomas Mraz)
* Sync po files from shadow.pot (Alban VIDAL)
* Usermod: guard against unsafe chown of homedir contents (Tomas Mraz)
* Add LASTLOG_UID_MAX to login.defs (Tomas Mraz)
* new[ug]idmap file capabilities support (Giuseppe Scrivano and Christian Brauner)
* Fix segfault in useradd (Tomas Mraz)
* Coverity issues (Tomas Mraz)
* Flush sssd caches (Jakub Hrozek)
* Log UID in nologin (Vladimir Ivanov)
* run pam_getenvlist after setup_env in su.c (Michael Vogt)
* Support systems with only utmpx (A. Wilcox)
* Fix unguarded ENABLE_SUBIDS code (Jan Chren (rindeal))
* Update po/zh_CN translation (Lion Yang)
* Create parent dirs for useradd -m (Michael Vetter)
* Prevent usermod segv
* Fix usermod crash (fariouche)
* Release 4.6
2018-04-29 Serge Hallyn <serge@hallyn.com>
* Newgrp: avoid unnecessary lookups
* Make language less binary
* Add error when turning off man switch
* Spelling fixes
* Make userdel work with -R
* newgidmap: enforce setgroups=deny if self-mapping a group
* Norwegian bokmål translation
* pwck: prevent crash by not passing O_CREAT
* WITH_TCB fixes from Mandriva
* Fix pwconv and grpconv entry skips
* Fix -- slurping in su
* add --prefix option
2017-07-16 Serge Hallyn <serge@hallyn.com>
* Import new Dutch translations.
2017-07-10 Serge Hallyn <serge@hallyn.com>
* Expand error codes for groupmod.
2017-05-17 Serge Hallyn <serge@hallyn.com>
* Release 4.5
2017-05-17 Serge Hallyn <serge@hallyn.com>
* Patch from Tobias Stoeckmann fixing regression in previous CVE fix
preventing SIGTERM to su from being propagated to the job.
* Patch from Chris Lamb making sp_lstchg shadow field reproducible.
* Merge Russian translation updates from Yuri Kozlov
* Fix missing close of subuid file on error
2017-02-23 Serge Hallyn <serge@hallyn.com>
* Merge patch by Tobias Stoeckmann <tobias@stoeckmann.org> to fix
the equivalent of util-linux CVE-2017-2616.
2017-02-08 Serge Hallyn <serge@hallyn.com>
* Update Kazakh translations
* Consult configuration before calculating subuids
* Remove misplaced semicolon
2017-01-29 Serge Hallyn <serge@hallyn.com>
* Patch from Fedora to improve performance with SSSD, Winbind,
or nss_ldap. (Tomas Mraz)
* Make sure knowndef_table is NULL-terminated. (Bernhard Rosenkränzer)
2016-12-21 Serge Hallyn <serge@hallyn.com>
* Drop leading underscore from _COMMONIO_H and _SHADOWIO_H
* Fix readability in usermod error messages.
* Reset user in tallylog
* Add audit support to su
* Changes since 4.4
2016-12-02 Serge Hallyn <serge@hallyn.com>
- Use sizeof rather than hardcoding snprintf args
- Fix useradd improper default loading
- Update Vietnamese translations
- Update Polish translations
- Remove non-POSIX chmod option in Makefile
- Fix suidubins assignments
- Fix --add-subuids etc spelling in manpages
- Audit homedir ownership change.
- Print error on selinux file context update failure
- Keep original file perms when creating a backup
* Changes since 4.2.1:
2016-12-02 Serge Hallyn <serge@hallyn.com>
- Documentation, error report and translations updates
- Replace path_max with 32
- User namespace support fixes/updates including:
- Correct sanity checks in newXidmap
- Fix building without subuid support
- Add /etc/subuid support for UID matching
- Support subuid for nonlocal users
- Default to 65536 subuid allocations
- Respect -r
- Check for range overflows
- Add tests from svn tree
- Use AC_CHECK_SIZEOF for uid_t size checks
- Accomodate missing /etc and login.defs
- Support FORCE_SHADOW
- Be more robust in hostile environment
- Allow removing a primary group
- Clear passwords on __pw_dup errors
- Memory leak fix in commonio_update and get_map_ranges
- Fix resource leak in syslog_sg
- Fix user busy error at userdel
- Support set/clear lastlog record via lastlog command
- Add --no-create-home as longopt for -M
- Fix signal races
- Reduce syslog priority of common usage events
Fixes: Bug 12762
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
This should be a better default than using VDSL2 since "conservative"
should work on all connections.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Some devices do not have an address, which prints an error when reading
it.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This is just swappin the qdisc without any further configuration.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This is a more generic term since CoDel is no longer being used
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This script configures CAKE as default qdisc where appropriate:
* It is not suitable to use any queue management on bridges/GRE/VTI/tun
interfaces.
* On Internet-facing interfaces, CAKE is configured in "internet" mode
whereas on any zones except RED, it is configured in "metro" mode
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from 007 (2013) to 013 (2020)
- Update rootfile
- Changelog
usbutils 013
Aurelien Jarno (1):
lsusb.8.in: do not mention usb.ids
Baruch Siach (1):
usb-devices.1: don't mention bash
Greg Kroah-Hartman (15):
usbhid-dump: move manpage to main directory out of subdir
usbhid-dump.8: add SPDX header
usbhid-dump.8: autogenerate it with the usbutils version number
.gitignore: add usbhid-dump.8
usbhid-dump: add SPDX identifiers to all files.
usbhid-dump: remove libusb.h libusb_strerror() implementation
usbhid-dump: remove lib directory
usbhid-dump: move .h files into src/ directory
Makefile.am: add usbhid-dump.8 to distclean list
usbhid-dump: some autoconf cleanup
usbhid-dump: remove some dev_list functions that were never used
dump_audiostreaming_interface(): remove unused variable
usbmisc: initialize string buffer before reading from device.
lsusb.py: drop trailing space on non-hub devices
lsusb.py: strip whitespace from device strings
Jakub Wilk (2):
lsusb(8): fix formatting
lsusb(8): document --tree
Pino Toscano (1):
lsusb.py: remove private paths for usb.ids
Rob Gill (1):
Additional device classes for usb-devices script
Rosen Penev (1):
usbhid-dump: Do not use rindex
Thomas Hebb (4):
Move read_sysfs_prop() from names.c to its own file
sysfs: Don't return bogus data for devices under a hub
lsusb: Use vendor and product name fallback logic in -D mode too
lsusb: Get manufacturer, product, and serial from sysfs
Timothy Robert Bednarzyk (1):
bootstrap: change /bin/bash to /bin/sh
Torleiv Sundre (1):
lsusb: fix two typos in UVC Extension Unit descriptor
Tormod Volden (1):
usbhid-dump: Put back autoconf check for libusb_set_option()
usbutils 012
Greg Kroah-Hartman:
Merge usbhid-dump into main usbutils repository
usbutils 011
Clemens Fruhwirth (1):
Add usbreset.c as noinst_PROGRAMS target.
Daniel Schaefer (1):
lsusb: Read unkown names from sysfs device desc.
Darsey Litzenberger (3):
Remove a small hack that no longer has any effect.
Cleanup grammar
lsusb-t: Emit USB IDs and other handy info when verbosity is increased
Emmanuele Bassi (1):
Require newer version of libusb
Georg Brandl (1):
lsusb.py: fix up Python 3 conversion
Greg Kroah-Hartman (10):
SPDX bill-of-material is supposed to be project_name.spdx
usbutils.spdx: rerun report, it is properly sorted.
desc-dump.c: fix compiler warning about unused variable
add usbreset to .gitignore
usbreset: fix some build warnings
usbhid-dump: update to latest version
fix up standard int types
update usbhid-dump git id
usbhid-dump: update to a newer version of usbhid-dump again.
usbutils.spdx: update with latest information
Kurt Garloff (4):
lsusb.py: Search multiple paths for usb.ids.
lsusb.py: Usb enum for parser state machine.
lsusb.py: Add driver names for usbhid.
lsusb.py: python2 compatibility
Lukas Nykryn (1):
Makefile.am: add files with licenses to archive
Mantas Mikulėnas (33):
lsusb.py: sort devices and interfaces numerically
lsusb.py: sort toplevel entries
lsusb.py: improve usage text
lsusb.py: replace fake deepcopy()
lsusb.py: remove -w (warn if usb.ids not sorted) option
lsusb.py: ensure all error messages are written to stderr
lsusb.py: support long options
lsusb.py: use regular print() instead of hand-rolling the same thing
lsusb.py: avoid shadowing Python's built-in 'str'
lsusb.py: replace usb.ids binary search with dict lookup
lsusb.py: remove now-unused bin_search()
lsusb.py: avoid manual calls to __foo__()
lsusb.py: replace __repr__() for USB IDs with __str__()
lsusb.py: insert class FF:FF:FF into usbclasses to avoid special casing
lsusb.py: entirely remove Usb* classes
lsusb.py: cosmetic - replace tuples-as-"immutable lists" with regular lists
lsusb.py: use 'elif' where suitable
lsusb.py: remove dead code
lsusb.py: move unrelated code out of try..except
lsusb.py: allow - as well as _ when matching hci module names
lsusb.py: use a constant for the magic class number 9
lsusb.py: Usb* classes: call read() automatically from constructor
lsusb.py: UsbEndpoint: indent is a class implementation detail
lsusb.py: a few cosmetic changes
lsusb.py: shorten find_usb_class()
lsusb.py: give all Usb* objects a .path attribute
lsusb.py: add an actual __repr__() to classes
lsusb.py: give all Usb* classes a superclass
lsusb.py: convert readattr() and readlink() to methods of the container
lsusb.py: use color by default
lsusb.py: rework output for more consistent indent of both columns
lsusb.py: fix endpoint interval spacing
lsusb.py: visually group USB-version-related fields
Michael Drake (4):
lsusb: Split out routine that fetches value for given field.
lsusb: Split out field name rendering.
lsusb: Add support for descriptor extensions.
lsusb: Add support for audio processing unit type-specific fields.
Philip Langdale (2):
lsusb: Added support for Billboard Alternate Mode Capability descriptor
lsusb.py: Fix formatting of 10Gbps speeds
Ross Burton (1):
usb-devices: use /bin/sh hashbang
Solomon Peachy (1):
lsusb: Add support for decoding IPP printer descriptors
Stefan Tauner (1):
Depend on libusb 1.0.14
Valerii Zapodovnikov (1):
man pages: add information on verbosity levels of -t option
junjie (1):
fix typo
usbutils 010
Aurelien Jarno (2):
usbreset.c: add missing <stdlib.h> include
Do not create and install usbutils.pc
Greg Kroah-Hartman (32):
fix dump_videocontrol_interface for unitialized variable usage
Add correct SPDX license identifiers to all files
Add SPDX identifiers on files that did not have a specific license.
wTotalLength should be printed as a hex number
usbmisc: fix up some strncpy() issues
lsusb-t: fix up error with readlink()
lsusb.py.in: add proper SPDX license identifier
usb-devices: reword the copyright identifier
LICENSES: move the GPL 2 license to the LICENSES directory
LICENSES/GPL-3.0.txt: add the file
lsusb.h: add copyright notice
lsusb-t: add copyright info
bom.spdx: Add bill of materials file in SPDX format.
ChangeLog: remove it.
AUTHORS: remove file
do_release: drop file
NEWS: add SPDX header and comment
autogen.sh: add SPDX and copyright header
list.h: add copyright information
travis-autogen.sh: add SPDX and copyright information.
INSTALL: remove the file, it's boiler-plate
configure.ac: add SPDX and copyright
man pages: add SPDX and copyright information
Makefile.am: add SPDX and copyright information
.gitmodules: add SPDX and copyright lines
lsusb.py.in: fix up Copyright strings
usbreset.c: add Alan's copyright
.travis.yml: add correct SPDX and copyright notices
bom.spdx: update with latest copyright and SPDX identifier additions
README.md: move the README file to markdown
README.md: fix fomatting
bom.spdx: upate with README -> README.md change
Lukas Nykryn (1):
lsusb.py: convert to python3
Michael Drake (11):
lsusb: Split subtype mapping out of AudioControl interface handling.
lsusb: Add declarative definitions for UAC1 and UAC2 descriptors.
lsusb: Add code to dump descriptor data using descriptor definition.
lsusb: Switch to descriptor-definition based dump for UAC1 and UAC2.
lsusb: Add descriptor definitions for UAC3.
lsusb: Add initial support for USB Audio Device Class 3.
lsusb: Add descriptor definition for USB3 BOS Configuration Summary.
lsusb: Dump USB3 BOS Configuration Summary Descriptor.
lsusb: Squash Wpointer-compare warning.
lsusb: Remove unused function.
lsusb: Fix array entry count for variable sized entries.
Robby Workman (1):
Makefile.am: Include usbreset.c in the release tarball
Torleiv Sundre (1):
lsusb: Dump UVC Stream based payload descriptor.
usbutils 009
Bjørn Mork (1):
usbreset: coding style
Emmanuele Bassi (1):
Don't use C99-ism
Greg Kroah-Hartman (22):
usbhid-dump: update submodule to latest version
add usbreset.c example program
update usbhid-dump to latest
lsusb.py: Don't dump a trace dump if usb.ids is not present
Grueninger, Tobias (1):
USB: usb-devices: Interface number can be a string
Heinrich Schuchardt (1):
autogen.sh: checkout usbhid-dump
Jaejoong Kim (4):
lsusb : add support for the Encoding Unit Desc for uvc 1.5 device
lsusb: fix alignment for Video Streaming interface desc
lsusb: parse additional control fileds in USB video control interfaces for UVC1.5
lsusb: proper display hexadecimal value for UVC control interface
Jakub Wilk (1):
Fix typos
Jo-Philipp Wich (1):
usbreset.c: import usability improvements from OpenWrt
Justin McBride (2):
Update lsusb.c
Un-indent bVariableSize for Frame-Based Format descriptors
Kylie McClain (1):
Makefile: install pkgconfig file to arch-dependent location
Mathias Nyman (2):
lsusb: Allocate the BOS descriptor buffer dynamically
lsusb: Add support for the USB 3.1 SuperSpeedPlus device capability desc
Muthu M (2):
lsusb: Fix issue with lengthy string descriptors
lsusb: Added support for Billboard Capability descriptor
Nikolai Kondrashov (2):
Update usbhid-dump repo URL
Update usbhid-dump to v1.4
Stephan Linz (7):
travis-ci: add control files borrowed from libusb
configure: remove summary about unused USE_ZLIB
drop unused input file for usb.ids update script
substitute usb.id location in lsusb Python script
travis-ci: cleanup before second run
travis-ci: rework travis-autogen.sh
lsusb: remove unused variable procbususb
Tobias Klauser (4):
lsusb: Report correct MaxPower for USB 3.0 devices
lsusb: Request proper descriptor type for USB 3.1
lsusb: Store link state descriptions without preceding space
build: Request at least libusb 1.0.9
Torleiv Sundre (2):
Added support for Platform Device Capability descriptor
lsusb: change endianness of first three fields when printing UUID/GUIDs.
Vianney le Clément de Saint-Marcq (3):
lsusb: Fix UVC STILL_IMAGE_FRAME descriptor
lsusb: Fix UVC VideoStreaming interface header descriptor
lsusb: Fix UVC OUTPUT_TERMINAL descriptor
Vincent Palatin (1):
lsusb: print WebUSB platform descriptor
usbutils 008
Alexandra Yates (2):
lsusb: Reports if USB2.0 port is on L1 state
lsusb: Reports devices that support BESL on USB2.0
Aurelien Jarno (1):
dump_ccid_device: fix a typo
Ben Chan (1):
lsusb: decode CDC MBIM extended functional descriptor
Greg Kroah-Hartman (8):
lsusb: fix incorrect printf() for CAPS
lsusb-t: handle problem if there is no usb bus list
.gitignore: add compile to the list of things we need to ignore
John Freed (1):
Fix logic error
Kurt Garloff (1):
Update lsusb.py in usbutils
Lukas Nykryn (2):
update COPYING file
lsusb-t: don't segfault when usbbuslist is empty
Peter Wu (1):
Ignore invalid string descriptors
Raphaël Droz (1):
usb-devices: hexadecimal bInterfaceNumber handling
Tom Gundersen (2):
lsusb: port to hwdb
drop dependency on usb.ids
Vadim Rutkovsky (1):
New path for usbhid-dump submodule
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
