There is no need to add a legend as I find it confusing. The change that
people are using an EOL is rather slim and so I don't to waste space.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Do not longer add unsupported/removed providers as an option
when adding a new/first ruleset provider.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This check is now based on a download URL instead of checking if
an entry in the ruleset sources is present.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- use Encode was missed out in the previous patch for dns.cgi This would mean that the
decode from UTF-8 would fail. I had tested the previous change but forgot to copy across
the use Encode line when I created the patch.
- This patch adds an encode back to UTF-8 after running the cleanhtml command. This way
the text is decoded from UTF-8 so that the cleanhtml command works correctly on
umlauted characters and then is encoded back to UTF-8 so that all text in the cgi page
is UTF-8.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- If Freifunk München e.V. is entered as a remark it gets converted to
Freifunk München e.V.
- This is because cleanhtml is used on the UTF-8 remark text before saving it to the file
and the HTML::Entities::encode_entities command that is run on that remark text does
not work with UTF-8 text.
- If the UTF-8 text in the remark is decoded before running through the cleanhtml command
then the characters with diacritical marks are correctly shown.
- Have tested out the fix on a remark with a range of different characters with
diacritical marks and all of the ones tested were displayed correctly with the fix while
in the original form they were mangled.
Fixes: Bug#12395
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- This reverts commit 7c6ff5ff12
- That commit removed the cleanhtml command which is not advised, based on feedback from
Michael Tremer from other patch submissions as it creates a potential security problem.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- When bug#11408 was fixed it was missed that key 41 has disabled inserted into it when
uploading into the N2N client. This replaced the no-pass entry for all N2N connections
resulting in the ovpnmain.cgi not being able to show the status correctly as the code
looks for pass or no-pass.
- The disabled entry has been present for a very long time and is not utilised anywhere
in the code.
- This fix ensures that key 41 in the uploaded N2N connection has no-pass entered
- Tested out and confirmed in my vm testbed.
Fixes: Bug#13548
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- This was fixed by moving the code for checking if the common name is already used, to
the same location as the code for checking if the connection name is already used.
- Tested out on vm testbed and confirmed that the certificates are not created and the
index.txt not updated if the common name is flagged as already being used. If the
entry is changed to use a new CN and Save pressed then the certs are saved and the
index.txt updated. If Cancel is pressed then no certs are saved and index.txt is not
updated.
Fixes: Bug#13404
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- This v2 version is to correct the bug number. I entered a wronn bug number in the first
version
- This extends the allowed options from just array of ip-address to also include
integer 8 or integer 16 or integer 32.
- Tested out on vm testbed. The array of integer 8 (or 16 or 32) is acceptewd by the dhcp
options section. I am not able to test out that the function actually works as I don't
have any dhcp situation set up to use that capability.
- Records or array of records is still not included. It was only an expansion of the array
of section to include integers.
Fixes: bug#11774
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- If Freifunk München e.V. is entered as a remark it gets converted to
Freifunk München e.V.
- This is because cleanhtml is used on the remark text before saving it to the file and
the HTML::Entities::encode_entities command that is run on that remark text encodes all
higher bit characters as unsafe characters and replaces them with their HTML entity
representation.
- Have tested out the remark with a range of different characters with diacritical marks
and all of the ones tested were re-written.
- The use of the cleanhtml makes sense when used on URL's or on text that is going to be
printed as part of the HTML code for a page but it doesn't seem to make sense for text
used in a remark.
- The cleanhtml function is only used on the remark text in dns.cgi and not on any other
entries on the page.
- Removing the call to the cleanhtml function results in the German umlauts being printed
in the remark section.
- Many of the WUI pages have the cleanhtml function used on remark or comment text.
- fwhosts.cgi does not use cleanhtml anywhere. So all its remark sections work with
characters with diacritical marks.
- If this patch is accepted, I will then submit patches for the other WUI pages where
characters with diacritical marks are re-written in remark or comment sections.
Fixes: Bug#12395
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
we had discussed this on december telco but it is not so
easy because our menusystem only shows entry's existing cgi's.
so i add a cgi redirect to http://$ENV{SERVER_ADDR}:3000
this add the entry under pakfire and also to service page.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is necessary since we now have a much shorter lifetime for the host
certificate. However, it is complicated to do this is which is why we
are copying the previous certificate and generate a new CSR. This is
then signed.
A caveat of this patch is that we do not rollover the key.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The function did not evaluate the return code which is why it used a
hack to figure out if some output is an error or not.
This is being fixed in this commit and the entire output is being
returned if the return code is non-zero.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- This v3 version has split the logging choice for drop hostile to separate the logging of
incoming drop hostile and outgoing drop hostile.
- The bug originator had no port forwards so all hostile would be dropped normally anyway.
However the logs were being swamped by the logging of drop hostile making analysis
difficult. So incoming drop hostile was desired to not be logged. However logging of
outgoing drop hostile was desired to identify if clients on the internal lan were
infected with malware trying to reach home.
- Added option with drop hostile section to decide if the dropped traffic should be
logged or not.
Fixes: bug12981
Tested-by: Adolf Belka <adolf.belka@ipfire.org
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Tested-by: Bernhard Bitsch <bbitsch@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This reverts commit e0be9eab47.
This change is now producing problems on IPv6-enabled systems as it will
deny access to any website that is IPv6-enabled as well, even if the
client connected using IPv4.
I have tested if squid is now running on fine on systems where IPv6 is
disabled and can confirm that its running just fine.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Acked-by: Peter Müller <peter.mueller@ipfire.org>
- A new IPFire user on the forum saw the orange and red coloured blocks in the legend
section and believed that they were messages about problems that had been created with
the fixed leases.
- This change puts a small block with seperate explanatory text for both the orange and
red coloured blocks.
- This change will also be applied to the wiki in a much clearer way
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
- When dealing with a problem on the forum I noticed that in the Fixed Leases table
Legend section there was a very large space between the empty checkbox icon and the
explanatory text. It looks like the   that I have removed worked on the text
section 'click to enable' as that was moved but not on the off.gif icon as that stayed
in its original place leaving a very large space between the icon and the explanatory
text. Removing the two commands fixes that.
- Reading up about   the problem might be related to these tags no longer being
recommended to use with the newer HTML versions and that indenting or spacing should be
done via CSS code. Will have a look in future on how to accomplish this via CSS.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
- The regex code does not extract out the chain and so it is missed off from the log output
when it is exported.
- Changed code tested out on my vm testbed and confirmed to work and include the chain in
the output.
Fixes: Bug13492
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfre.org>
In web interface, on page DHCP Server, in table Current fixed leases, add column with resolved hostname by IP address
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- The Expires time heading for the Connections WUI page has seconds listed. However the
code is converting the seconds to hours:minutes:seconds.
- This patch is changing the heading to H:M:S in English and the equivalent in the other
languages. I have basewd this on the initial letter for Hours, Minutes & Seconds in
each of the languages.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
This commit adds support for using LVM and mdadm based RAID devices
for the CGI page.
In case one or more drives/partitions are used by such a "grouped"
volume they still will displayed on the page, but can not be
configured/used. Instead the "master" volume of which the
drive/partition is part of is shown in the "mountpoint" input box.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- When the url filter update enable checkbox is unchecked then this patch calls
urlfilterctrl with the remove option added in the otrher patch of this series.
- Tested on my vm testbed that this change does remove the urlfilter symlink from the
fcron directories when the update is disabled.
Fixes: Bug#10649
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- At long last I have re-visited the patch submission for bug #11048 and fixed the issues
that caused the problems last time I evaluated it in Testing.
- The insecure package download icon is shown if entry 41 in /var/ipfire/ovpn/ovpnconfig
is set to no-pass. The code block on ovpnmain.cgi that deals with this checks if the
connection is a host and if the first password entry is a null. Then it adds no-pass
to ovpnconfig.
- The same block of code is also used for when he connection is edited. However at this
stage the password entry is back to null because the password value is only kept until
the connection has been saved. Therefore doing an edit results in the password value
being taken as null even for connections with a password.
- This fix enters no-pass if the connection type is host and the password is null, pass if
the connection type is host and the password has characters. If the connection type is
net then no-pass is used as net2net connections dop not have encrypted certificates.
- The code has been changed to show a different icon for unencrypted and encrypted
certificates.
- Separate patches are provided for the language file change, the provision of a new icon
and the code for the update.sh script for the Core Update to update all existing
connections, if any exist, to have either pass or no-pass in index 41.
- This patch set was a joint collaboration between Erik Kapfer and Adolf Belka
- Patch set, including the code for the Core Update 180 update.sh script has been tested
on a vm testbed
Fixes: Bug#11048
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Suggested-by: Adolf Belka <adolf.belka@ipfire.org>
Suggested-by: Erik Kapfer <ummeegge@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
To quote from the changelog of Tor 0.4.8.4:
o Minor feature (client, IPv6):
- Make client able to pick IPv6 relays by default now meaning
ClientUseIPv6 option now defaults to 1. Closes ticket 40785.
In order to avoid any malfunctions on IPFire installations,
set this option to "0" explicitly.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This check was totaly broken and resulted into not beeing able to
configure/mount more than one extra harddrive.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Reiserfs was stopped in IPFire in Core Update 167. It has been announced that reiserfs
will be removed from the kernel in 2025.
- This patch gives a warning about this deprecation and removal if reiserfs is used. The
warning also requests that the user does a re-installation using either ext4 or xfs
filesystems.
- Tested out on a vm installation with reiserfs, ext4 and xfs. Messgae shown on system
with reiserfs filesystem but nopt on the other two.
- Warning message added into the English language file and ./make.sh lang run.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
