We disable cores if the are affected by some cpu vulnerabilities
this cores report errors if you try to change the settings.
So only print the output for core0 and hide it for all cores.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
the initskript loads a test-modul for amd-pstate (which traces on intel)
and off course reports errors if firmware settings are missing.
this also fix the error at start because also amd-pstate doesn't support
ondemand mode.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from version 6.0.15 to 7.0.2
- Update of rootfile
- suricata 7.0.2 requires libhtp >= 0.5.45
it also requires libelf.so.1 for execution. Previous suricata versions only required
libelf for building. libelf or elfutils are not mentioned anywhere in the changelog
- Without elfutils available during starting then suricata fails to start due to
libelf.so.1 not being available.
- Tested out suricata7 with elfutils on my vm testbed and it successfully started.
- The suricata-5.0.8 patch has been removed as it got applied to configure.ac but this
is not available in suricata-7.0.2. It looks like that patch was never actually used in
suricata as all the builds I checked used the configure file from the source tarball
and the configure was never created by running autoconf on the configure.ac
- Changelog is too large to include here. Details can be found in the ChangeLog file in
the source tarball
Fixes: Bug#13516
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
If GRUB could not be installed during installation, the installer
continued without reporting the error to the user.
This change will make the installer fail.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- This v3 version now has two if loops allowing logging of incoming drop hostile or
outgoing drop hostile or both or neither.
- Dependent on the choice in optionsfw.cgi this loop will either log or not log the
dropped hostile traffic.
Fixes: bug12981
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 8.2 with patch 1 to 8.2 with patches 1 to 10
- Update of rootfile not required
- Changelog
Patch 10
Fix the case where text to be completed from the line buffer (quoted) is
compared to the common prefix of the possible matches (unquoted) and the
quoting makes the former appear to be longer than the latter. Readline
assumes the match doesn't add any characters to the word and doesn't display
multiple matches.
Patch 9
Fix issue where the directory name portion of the word to be completed (the
part that is passed to opendir()) requires both tilde expansion and dequoting.
Readline only performed tilde expansion in this case, so filename completion
would fail.
Patch 8
Add missing prototypes for several function declarations.
Patch 7
If readline is called with no prompt, it should display a newline if return
is typed on an empty line. It should still suppress the final newline if
return is typed on the last (empty) line of a multi-line command.
Patch 6
This is a variant of the same issue as the one fixed by patch 5. In this
case, the signal arrives and is pending before readline calls rl_getc().
When this happens, the pending signal will be handled by the loop, but may
alter or destroy some state that the callback uses. Readline needs to treat
this case the same way it would if a signal interrupts pselect/select, so
compound operations like searches and reading numeric arguments get cleaned
up properly.
Patch 5
If an application is using readline in callback mode, and a signal arrives
after readline checks for it in rl_callback_read_char() but before it
restores the application's signal handlers, it won't get processed until the
next time the application calls rl_callback_read_char(). Readline needs to
check for and resend any pending signals after restoring the application's
signal handlers.
Patch 4
There are systems that supply one of select or pselect, but not both.
Patch 3
The custom color prefix that readline uses to color possible completions
must have a leading `.'.
Patch 2
It's possible for readline to try to zero out a line that's not null-
terminated, leading to a memory fault.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
These include (amongst others) fixes for:
GLIBC-SA-2024-0001:
===================
syslog: Heap buffer overflow in __vsyslog_internal (CVE-2023-6246)
__vsyslog_internal did not handle a case where printing a SYSLOG_HEADER
containing a long program name failed to update the required buffer
size, leading to the allocation and overflow of a too-small buffer on
the heap.
GLIBC-SA-2024-0002:
===================
syslog: Heap buffer overflow in __vsyslog_internal (CVE-2023-6779)
__vsyslog_internal used the return value of snprintf/vsnprintf to
calculate buffer sizes for memory allocation. If these functions (for
any reason) failed and returned -1, the resulting buffer would be too
small to hold output.
GLIBC-SA-2024-0003:
===================
syslog: Integer overflow in __vsyslog_internal (CVE-2023-6780)
__vsyslog_internal calculated a buffer size by adding two integers, but
did not first check if the addition would overflow.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Calling a global sync operation manually is generally a bad idea as it
can block for forever. If people have storage that does not retain
anything that is being written to it, they need to fix their hardware.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 5.2 with patches 1 to 21 to 5.2 with patches 1 to 26
- Update of rootfile not required
- Changelog
Patch 26
The custom color prefix that readline uses to color possible completions
must have a leading `.'.
Patch 25
Make sure a subshell checks for and handles any terminating signals before
exiting (which might have arrived after the command completed) so the parent
and any EXIT trap will see the correct value for $?.
Patch 24
Fix bug where associative array compound assignment would not expand tildes
in values.
Patch 23
Running `local -' multiple times in a shell function would overwrite the
original saved set of options.
Patch 22
It's possible for readline to try to zero out a line that's not null-
terminated, leading to a memory fault.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
myMPD is written in C and has a nice WebGUI to play
local music and also a WebRadio browser.
This is to replace the removec client175.
After install it can reached via
https://IP_OF_THE_IPFIRE:8800
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Updated from version 4.14.2 to 4.14.3
- Update of rootfile not required
- Patch renamed to new version number
- Changelog
4.14.3
libshadow:
Avoid null pointer dereference.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.5.3 to 1.6.0
- Update of rootfile
- A build bug was found with 1.6.0 if --enable-read-both-confs was set in the configure.
A commit fixing this has been released and converted into a patch for IPFire. This
will end up in the next pam release version and the IPFire patch can then be removed.
- Changelog
1.6.0
* Added support of configuration files with arbitrarily long lines.
* build: fixed build outside of the source tree.
* libpam: added use of getrandom(2) as a source of randomness if available.
* libpam: fixed calculation of fail delay with very long delays.
* libpam: fixed potential infinite recursion with includes.
* libpam: implemented string to number conversions validation when parsing
controls in configuration.
* pam_access: added quiet_log option.
* pam_access: fixed truncation of very long group names.
* pam_canonicalize_user: new module to canonicalize user name.
* pam_echo: fixed file handling to prevent overflows and short reads.
* pam_env: added support of '\' character in environment variable values.
* pam_exec: allowed expose_authtok for password PAM_TYPE.
* pam_exec: fixed stack overflow with binary output of programs.
* pam_faildelay: implemented parameter ranges validation.
* pam_listfile: changed to treat \r and \n exactly the same in configuration.
* pam_mkhomedir: hardened directory creation against timing attacks.
Please note that using *at functions leads to more open file handles
during creation.
* pam_namespace: fixed potential local DoS (CVE-2024-22365).
* pam_nologin: fixed file handling to prevent short reads.
* pam_pwhistory: helper binary is now built only if SELinux support is enabled.
* pam_pwhistory: implemented reliable usernames handling when remembering
passwords.
* pam_shells: changed to allow shell entries with absolute paths only.
* pam_succeed_if: fixed treating empty strings as numerical value 0.
* pam_unix: added support of disabled password aging.
* pam_unix: synchronized password aging with shadow.
* pam_unix: implemented string to number conversions validation.
* pam_unix: fixed truncation of very long user names.
* pam_unix: corrected rounds retrieval for configured encryption method.
* pam_unix: implemented reliable usernames handling when remembering passwords.
* pam_unix: changed to always run the helper to obtain shadow password entries.
* pam_unix: unix_update helper binary is now built only if SELinux support
is enabled.
* pam_unix: added audit support to unix_update helper.
* pam_userdb: added gdbm support.
* Multiple minor bug fixes, portability fixes, documentation improvements,
and translation updates.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 0.9.4 to 0.9.5
- Update of rootfile not required
- force-netlink-include-path patch updated due to chganges in file in source tarball
- Changelog
0.9.5
Info Screen:
improve format of percentages (use fixed format rather than auto-format).
Configuration:
fix ncurses support for white backgrounds (#119),
configuration file now either in $XDG_CONFIG_HOME/wavemon/wavemonrc or in
$HOME/.config/wavemon/wavemonrc (#106).
Miscellaneous
avoid including include linux/if.h (#109),
check and set support for C99 standard (#108),
updated README (#107),
configuration file can now be located in XDG_CONFIG_HOME (#105),
added portable implementation of asprintf(3),
updated copied nl80211 header file,
make -Wpedantic the default when building.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.3 to 3.5
- Update of rootfile not required
- Two patches no longer required as fixes are now in source tarball
- Changelog
3.5 (Tue Mar 14 2023)
- Decode HPE OEM records 216, 224, 230, 238 and 242.
- Fortify entry point length checks.
- Add a --no-quirks option.
- Drop the CPUID exception list.
- Do not let --dump-bin overwrite an existing file.
- Ensure /dev/mem is a character device file.
- Bug fixes:
Fix segmentation fault in HPE OEM record 240
- Minor improvements:
Typo fixes
Write the whole dump file at once
Fix a build warning when USE_MMAP isn't set
3.4 (Mon Jun 27 2022)
- Support for SMBIOS 3.4.0. This includes new memory device types, new
processor upgrades, new slot types and characteristics, decoding of memory
module extended speed, new system slot types, new processor characteristics
and new format of Processor ID.
- Support for SMBIOS 3.5.0. This includes new processor upgrades, BIOS
characteristics, new slot characteristics, new on-board device types, new
pointing device interface types, and a new record type (type 45 -
Firmware Inventory Information).
- Decode HPE OEM records 194, 199, 203, 236, 237, 238 and 240.
- Bug fixes:
Fix OEM vendor name matching
Fix ASCII filtering of strings
Fix crash with option -u
- Minor improvements:
Skip details of uninstalled memory modules
Don't display the raw CPU ID in quiet mode
Improve the formatting of the manual pages
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This updated version of this script avoids any errors if collectd is not
running (yet) which might happen during the boot process.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The "ping" plugin does not re-resolve the gateway IP address after
pinging it for the first time. For most people this won't be a big
problem, but if the default gateway changes, the latency graph won't
work any more.
In order to do re-resolve "gateway", the only way is to restart
collectd.
Fixes: #13522
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Acked-by: Peter Müller <peter.mueller@ipfire.org>
Because of a single variable being passwd with the workgroup, it would
have been possible to inject shell commands here. Passing it in the
array prevents that.
Signed-off-by: Daniel Weismüller <daniel.weismueller@ipfire.org>
- lfs and toorfile created for wsdd
- wsdd added to make.sh script
- created install/update/uninstall scripts for wsdd that create an unpriveleged user and
group.
- initscript created for wsdd. As wsdd is a python3 script, when it is run as a daemon the
pidof command does not find any pid for wsdd. So a directory/file for a pid file was
created. This is then passed to the loadproc and killproc commands. After the loadproc
command has been created the pid is extracted from the ps aux command and put into the
pid file. This then works when running the killproc command for it to know what to go
and stop. The statusproc command does not have the ability to feed in the pid from a
pid file and so it fails to find a running wsdd as it uses the pidof command. Code was
added to the status section of the initscript to check if the pid file exists and if so
to print the same command as used with the statusproc command, and also the same
wording if the pid file does not exist because wsdd is not running.
- info from the ethernet/settings file is used to identify if only green0 is available or
if blue0 is also used and based on this the appropriate interface commands are added to
the wsdd command.
- wsdd is also set up to run in a chroot
- Has been tested on my vm testbed, initially by editing the files on the vm clone. After
everything confiremd to be working, the build was successfully carried out and the
.ipfire package was copied to a new vm clone installed and shown to perform as expected.
This test only confirms that wsdd is correctly installed and started. Shutsdown and
restarts on reboot successfully. Confirmed from the ps aux info that wsdd has been
started with the correct options. Thge testing can not evaluate if wsdd enables windows
systems newer than version 7 top be able to detect the samba shares as I have no
windows systems.
Fixes: Bug13445
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- Update from version 3.8.3 to 3.8.4
- Update of rootfile not required
- Permanent fix for smtp smuggling will be in version 3.9. However the fix has been
backported into version 3.8.4 but with the default for the parameter of "no".
- This patch sets the defaults for all the main.cf parameters highlighted by Wietse
Venema in http://www.postfix.org/smtp-smuggling.html
- Additionally the implementation of smtpd_forbid_bare_newline = yes has been added to
the install.sh pak for postfix so that it will be included into any main.cf file being
restored from backup. This parameter is available for the first time in 3.8.4 so will
not be in any backup prior to this release and can therefore be safely applied to
restored versions of main.cf.
- This fix in install.sh will be able to be removed when version 3.9 is released early
in 2024 as the default for that parameter in that version onwards will then be "yes"
- Changelog
3.8.4
Security: with "smtpd_forbid_bare_newline = yes" (default
"no" for Postfix < 3.9), reply with "Error: bare <LF>
received" and disconnect when an SMTP client sends a line
ending in <LF>, violating the RFC 5321 requirement that
lines must end in <CR><LF>. This prevents SMTP smuggling
attacks that target a recipient at a Postfix server. For
backwards compatibility, local clients are excluded by
default with "smtpd_forbid_bare_newline_exclusions =
$mynetworks". Files: mantools/postlink, proto/postconf.proto,
global/mail_params.h, global/smtp_stream.c, global/smtp_stream.h,
smtpd/smtpd.c.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- Update the patches to include patches 16 to 21
- Update of rootfile not required
- Changelog
patch 21: fix for expanding command substitutions in a word expansion in a
here-document
patch 20: allow time reserved word as first token in command substitution
patch 19: fix case where background job set the terminal process group
patch 18: fix for returning unknown tokens to the bison parser
patch 17: fix for optimizing forks when using the . builtin in a subshell
patch 16: fix for a crash if one of the expressions in an arithmetic for command
expands to NULL
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- libxml2 since version 2.12.0 has removed a variable that was specified in the apache
apache mod_xml2enc code.
- This dependency caused the apache2 build to fail with the updated libxml2.
- This patch removes the dependency. It will be able to be removed when the next apache
update is carried out as the patch was created from an apache commit.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
the kernel has no CONFIG_MICROCODE_{AMD|INTEL} anymore so this patch change the check
to CONFIG_MICROCODE.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
