- Update from 1.12.20 to 1.14.0
- Update of rootfile
- Changelog
1.14.x is a new stable branch, superseding 1.12.x.
Summary of major changes between 1.12.x and 1.14.0
Dependencies:
• dbus now requires at least a basic level of support for C99 variadic
macros, as implemented in gcc >= 3, all versions of Clang, and
MSVC >= 2005. In practice this requirement has existed since version
1.9.2, but it is now official.
• dbus now requires a C99-compatible va_copy() macro (or a __va_copy()
macro with the same behaviour), except when building for Windows using
MSVC and CMake.
• On Unix platforms, if getpwnam_r() and getgrnam_r() are implemented,
they must be POSIX-conformant. The non-POSIX signature seen in ancient
Solaris versions will no longer work.
• All Windows builds now require Windows Vista or later.
(Note that we do not recommend or support use of dbus on operating
systems outside their vendor's security support lifetime, such as Vista.)
• GLib >= 2.38 is required if full test coverage is enabled
(reduced from 2.40 in dbus 1.12.x.)
• Building using CMake now requires CMake 3.4.
• Building documentation using CMake now requires xsltproc, Docbook DTDs
(for example docbook-xml on Debian derivatives), and Docbook XSLT
stylesheets (for example docbook-xsl on Debian derivatives). Using
KDE's meinproc4 documentation processor is no longer supported.
Build-time configuration changes:
• Move CMake build system to top level, matching normal practice for
CMake projects
Deprecations:
**Looking through these I don't believe they will cause a problem as they are
deprecations and not yet removed.In the future if needed we might need to set
datadir to /etc to keep the location the same as with syscondir. This won't be
needed if we don't use the system.d directory for dbus policies.
• Third-party software should install default dbus policies for the system
bus into ${datadir}/dbus-1/system.d (this has been supported since dbus
1.10, released in August 2015). Installing default dbus policies in
${sysconfdir}/dbus-1/system.d is now considered to be deprecated. Policy
files in ${sysconfdir}/dbus-1/system.d continue to be read, but this
directory should only be used by system administrators wishing to
override the default policies.
The ${datadir} applicable to dbus is usually /usr/share and the
${sysconfdir} is usually /etc.
• A similar pattern applies to the session bus policies in session.d.
• The dbus-send(1) man page now documents --bus and --peer instead of
the old --address synonym for --peer, which has been deprecated since
the introduction of --bus and --peer in 1.7.6
• The dbus-daemon man page now has scarier warnings about
<allow_anonymous/> and non-local TCP, which are insecure and should
not be used, particularly for the standard system and session buses
• DBusServer (and hence the dbus-daemon) no longer accepts usernames
(login names) for the recommended EXTERNAL authentication mechanism,
only numeric user IDs or the empty string. See 1.13.0 release notes
for full details.
New features:
• On Linux 4.13 or later when built against a suitable glibc version,
GetConnectionCredentials() now includes UnixGroupIDs, the effective
group IDs of the initiator of the connection, taken from
SO_PEERGROUPS.
• On Linux 4.13 or later, <policy group="…"> now uses the SO_PEERGROUPS
credentials-passing socket option to get the effective group IDs
of the initiator of the connection. See 1.13.4 release notes for details.
• Add a --sender option to dbus-send, which requests a name and holds it
until the signal has been sent
• dbus-daemon <allow> and <deny> rules can now specify a
send_destination_prefix attribute, which is like a combination of
send_destination and the arg0namespace keyword in match rules.
See 1.13.12 release notes for more details
• The dbus-daemon now filters the messages that it relays, removing
header fields that it does not understand. Clients must not rely on
this behaviour unless they have confirmed that they are connected to
a suitable message bus implementation, for example by querying its
Features property.
• The dbus-daemon now emits a signal, ActivatableServicesChanged, when
the list of activatable services may have changed. Support for this
signal can be discovered by querying the Features property.
• It is now possible to disable traditional (non-systemd) service
activation at build-time (Autotools: --disable-traditional-activation,
CMake: -DENABLE_TRADITIONAL_ACTIVATION=OFF). See 1.13.10 release notes
for details.
• The API reference manual can be built as a Qt compiled help file if
qhelpgenerator(-qt5) is available. See 1.13.16 release notes for details.
Miscellaneous behaviour changes:
• When using the "user bus" (--enable-user-session), put the dbus-daemon
in the session slice
• Several environment variables set by systemd are no longer passed
on to activated services
• If the dbus-daemon is compiled for Linux with systemd support, it
now informs systemd that it is ready for use via the sd_notify()
mechanism
• Tarball releases no longer contain pre-2007 changelogs and are now
compressed with xz, making them around 35% smaller.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- This is an addon whose purpose is defined as :-
Netpbm is a toolkit for manipulation of graphic images, including conversion of images
between a variety of different formats. There are over 300 separate tools in the
package including converters for about 100 graphics formats. Examples of the sort of
image manipulation we're talking about are: Shrinking an image by 10%; Cutting the top
half off of an image; Making a mirror image; Creating a sequence of images that fade
from one image to another.
- None of the above seems to be a purpose related to a Firewall. Additionally it is
available in a huge number of distributions, including Linux, BSD,Windows,
MacOS X/Darwin, Solaris, AIX etc
- This package seems to be better used on a system in the lan protected by IPFire than
used on IPFire itself
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- Update from 3.0.6 to 3.0.7
- Update of rootfile
- Changelog
Version 3.0.7 -
- Fixed bug #345, in which delimitedList changed expressions in place
using expr.streamline(). Reported by Kim Gräsman, thanks!
- Fixed bug #346, when a string of word characters was passed to WordStart
or WordEnd instead of just taking the default value. Originally posted
as a question by Parag on StackOverflow, good catch!
- Fixed bug #350, in which White expressions could fail to match due to
unintended whitespace-skipping. Reported by Fu Hanxi, thank you!
- Fixed bug #355, when a QuotedString is defined with characters in its
quoteChar string containing regex-significant characters such as ., *,
?, [, ], etc.
- Fixed bug in ParserElement.run_tests where comments would be displayed
using with_line_numbers.
- Added optional "min" and "max" arguments to `delimited_list`. PR
submitted by Marius, thanks!
- Added new API change note in `whats_new_in_pyparsing_3_0_0`, regarding
a bug fix in the `bool()` behavior of `ParseResults`.
Prior to pyparsing 3.0.x, the `ParseResults` class implementation of
`__bool__` would return `False` if the `ParseResults` item list was empty,
even if it contained named results. In 3.0.0 and later, `ParseResults` will
return `True` if either the item list is not empty *or* if the named
results dict is not empty.
# generate an empty ParseResults by parsing a blank string with
# a ZeroOrMore
result = Word(alphas)[...].parse_string("")
print(result.as_list())
print(result.as_dict())
print(bool(result))
Prints:
[]
{}
False
# add a results name to the result
result["name"] = "empty result"
print(result.as_list())
print(result.as_dict())
print(bool(result))
Prints:
[]
{'name': 'empty result'}
True
In previous versions, the second call to `bool()` would return `False`.
- Minor enhancement to Word generation of internal regular expression, to
emit consecutive characters in range, such as "ab", as "ab", not "a-b".
- Fixed character ranges for search terms using non-Western characters
in booleansearchparser, PR submitted by tc-yu, nice work!
- Additional type annotations on public methods.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- Update from 9.55.0 to 9.56.1
- Update of rootfile
- Changelog
Version 9.56.0 (2022-02-22)
Highlights in this release include:
New PDF Interpreter: This is an entirely new implementation written in C
(rather than PostScript, as before). For a full discussion of this change
and reasons for it see: Changes Coming to the PDF Interpreter.
In this (9.56.0) release, the new PDF interpreter is now ENABLED by default
in Ghostscript, but the old PDF interpreter can be used as a fallback by
specifying -dNEWPDF=false. We've provided this so users that encounter
issues with the new interpreter can keep working while we iron out those
issues, the option will not be available in the long term.
This also allows us to offer a new executable (gpdf, or gpdfwin??.exe on
Windows) which is purely for PDF input. For this release, those new binaries
are not included in the "install" make targets, nor in the Windows installers.
Calling Ghostscript via the GS API is now thread safe. The one limitation is
that the X11 devices for Unix-like systems (x11, x11alpha, x11cmyk, x11cmyk2,
x11cmyk4, x11cmyk8, x11gray2, x11gray4 and x11mono) cannot be made thread
safe, due to their interaction with the X11 server, those devices have been
modified to only allow one instance in an executable.
The PSD output device now writes ICC profiles to their output files, for
improved color fidelity.
Our efforts in code hygiene and maintainability continue.
The usual round of bug fixes, compatibility changes, and incremental
improvements.
Included below are incompatible changes from recent releases (the specific release
in question is listed in parentheses). We include these, for now, as we are aware
that not everyone upgrades with every release.
(9.55.0) Changes to the device API. This will affect developers and
maintainers of Ghostscript devices. Firstly, and most importantly,
the way device-specific "procs" are specified has been rewritten
to make it (we think!) clearer and less confusing. See The
Interface between Ghostscript and Device Drivers and The Great
Device Rework Of 2021 for more details.
(9.55.0) The command line options -sGraphicsICCProfile=___,
-dGraphicsIntent=#, -dGraphicsBlackPt=#, -dGraphicsKPreserve=# have
been changed to -sVectorICCProfile=___, -dVectorIntent=#,
-dVectorBlackPt=#, -dVectorKPreserve=#.
(9.53.0) As of 9.53.0, we have (re-)introduced the patch level to the
version number, this helps facilitate a revised policy on handling
security-related issues.
Note for GSView Users: The patch level addition breaks GSView 5 (it is
hardcoded to check for versions 704-999. It is possible, but not guaranteed
that a GSView update might be forthcoming to resolve this.
(9.52) -dALLOWPSTRANSPARENCY: The transparency compositor (and related
features), whilst we are improving it, remains sensitive to being
driven correctly, and incorrect use can have unexpected/undefined
results. Hence, as part of improving security, we limited access to
these operators, originally using the -dSAFER feature. As we made
"SAFER" the default mode, that became unacceptable, hence the new
option -dALLOWPSTRANSPARENCY which enables access to the operators.
(9.50) There are a couple of subtle incompatibilities between the old and
new SAFER implementations. Firstly, as mentioned in the 9.50 release
notes, SAFER now leaves standard PostScript functionality unchanged
(except for the file access limitations). Secondly, the interaction
with save/restore operations has changed. See SAFER.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
This package installs some firmware files. Since linux-firmware is now
compressed, files will no longer be overwritten, but this package will
put the uncompressed files next to the compressed ones.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
To solve the behavior discribed in bug 12404 I added the path
/var/ipfire/cups to the backup.
Signed-off-by: Daniel Weismueller <daniel.weismueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 3.21.6 to 3.22.2
- Update of rootfile
- Changelog
HPLIP 3.22.2 - This release has the following changes:
Added support for following new Distro's:
Elementary OS 6.1
RHEL 8.5
Linux Mint 20.3
Added support for the following new Printers:
HP LaserJet Tank MFP 1602a
HP LaserJet Tank MFP 1602w
HP LaserJet Tank MFP 1604w
HP LaserJet Tank MFP 2602dn
HP LaserJet Tank MFP 2602sdn
HP LaserJet Tank MFP 2602sdw
HP LaserJet Tank MFP 2602dw
HP LaserJet Tank MFP 2604dw
HP LaserJet Tank MFP 2604sdw
HP LaserJet Tank MFP 2603dw
HP LaserJet Tank MFP 2603sdw
HP LaserJet Tank MFP 2605sdw
HP LaserJet Tank MFP 2606dn
HP LaserJet Tank MFP 2606sdn
HP LaserJet Tank MFP 2606sdw
HP LaserJet Tank MFP 2606dw
HP LaserJet Tank MFP 2606dc
HP LaserJet Tank MFP 1005
HP LaserJet Tank MFP 1005w
HP LaserJet Tank MFP 1005nw
HP LaserJet Tank 1502a
HP LaserJet Tank 1502w
HP LaserJet Tank 1504w
HP LaserJet Tank 2502dw
HP LaserJet Tank 2502dn
HP LaserJet Tank 2504dw
HP LaserJet Tank 2503dw
HP LaserJet Tank 2506dw
HP LaserJet Tank 2506d
HP LaserJet Tank 2506dn
HP LaserJet Tank 1020
HP LaserJet Tank 1020w
HP LaserJet Tank 1020nw
HPLIP 3.21.12- This release has the following changes:
Added support for following new Distro's:
MX Linux 21
Elementary OS 6
Fedora 35
HPLIP 3.21.10 - This release has the following changes:
Added support for following new Distro's:
Ubuntu 21.10
Debian 11
Zorin 15
Zorin 16
Added support for the following new Printers:
HP ENVY Inspire 7200e series
HP ENVY Inspire 7900e series
HP LaserJet MFP M140a
HP LaserJet MFP M139a
HP LaserJet MFP M141a
HP LaserJet MFP M142a
HP LaserJet MFP M140w
HP LaserJet MFP M140we
HP LaserJet MFP M139w
HP LaserJet MFP M139we
HP LaserJet MFP M141w
HP LaserJet MFP M141we
HP LaserJet MFP M142we
HP LaserJet MFP M142w
HP LaserJet M109a
HP LaserJet M110a
HP LaserJet M111a
HP LaserJet M112a
HP LaserJet M109w
HP LaserJet M109we
HP LaserJet M110w
HP LaserJet M110we
HP LaserJet M111w
HP LaserJet M111we
HP LaserJet M112we
HP LaserJet M112w
HP DesignJet Z6 Pro 64in
HP DesignJet Z9 Pro 64in
HP PageWide XL Pro 5200 PS MFP series
HP PageWide XL Pro 8200 PS MFP series
HP PageWide XL 3920 MFP
HP PageWide XL 4200 Printer
HP PageWide XL 4200 Multifunction Printer
HP PageWide XL 4700 Printer
HP PageWide XL 4700 Multifunction Printer
HP PageWide XL 5200 Printer
HP PageWide XL 5200 Multifunction Printer
HP PageWide XL 8200 Printer
HPLIP 3.21.8 - This release has the following changes:
Added support for following new Distro's:
Linux Mint 20.2
RHEL 8.4
Manjaro 21.0.7
Added support for the following new Printers:
HP Smart Tank 500 series
HP Smart Tank 530 series
HP Smart Tank Plus 570 series
HP Smart Tank 7600
HP Smart Tank 750
HP Smart Tank 790
HP Smart Tank Plus 710-720
HP Smart Tank Plus 7000
HP Smart Tank Plus 660-670
HP Smart Tank Plus 6000
HP DeskJet Ink Advantage Ultra 4800 All-in-One Printer series
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from 1.18.188 to 1.22.64
- Update of rootfile
- Ran aws in shell and got help response so it is working in principle
- Changelog is too large, with nearly 1700 lines, to include here as there appears to be
a new release nearly every day. so there are a huge number of releases between 1.18.188
from Dec 2nd 2020 to 1.22.64 from Feb 28 2022. It appears that only at weekends no
releases are done. Full changelog can be viewed at
https://github.com/aws/aws-cli/blob/develop/CHANGELOG.rst
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This package tries to identify if it is actually installed and does that
in a rather unorthodox way. So, thoses files are needed to run the "oci"
command. Only god knows why.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Rename lfs, rootfile and paks directory
- Change name in make.sh
- Tested out in a vm system and worked
Fixes: Bug#12772
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
>>> https://www.rodsbooks.com/gdisk/ <<<
source = https://sourceforge.net/projects/gptfdisk/files/gptfdisk/1.0.8/gptfdisk-1.0.8.tar.gz/download
Hi @ all
I have a new add-on here which I use e.g. to bring partitions from mbr to gpt without data loss.
It is also well suited for rescuing broken partitions.
GPT fdisk (consisting of the gdisk, cgdisk, sgdisk, and fixparts programs) is a set of text-mode partitioning tools for Linux,
FreeBSD, Mac OS X, and Windows.
The gdisk, cgdisk, and sgdisk programs work on Globally Unique Identifier (GUID) Partition Table (GPT) disks,
rather than on the older (and once more common) Master Boot Record (MBR) partition tables.
The fixparts program repairs certain types of damage to MBR disks and enables changing partition types from
primary to logical and vice-versa.
Signed-off-by: Marcel Follert (Smooky) <smooky@v16.de>
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
- Update from 5.58 to 5.62
- Update of rootfile
- Changelog
### Version 5.62, 2022.01.17, urgency: MEDIUM
* New features
- Added a bash completion script.
* Bugfixes
- Fixed a transfer() loop bug.
### Version 5.61, 2021.12.22, urgency: LOW
* New features sponsored by the University of Maryland
- Added new "protocol = capwin" and "protocol = capwinctrl"
configuration file options.
* New features for the Windows platform
- Added client mode allowing authenticated users to view
logs, reconfigure and terminate running stunnel services.
- Added support for multiple GUI and service instances
distinguised by the location of stunnel.conf.
- Improved log window scrolling.
- Added a new 'Pause auto-scroll' GUI checkbox.
- Double click on the icon tray replaced with single click.
- OpenSSL DLLs updated to version 3.0.1.
* Other new features
- Rewritten the testing framework in python (thx to
Peter Pentchev for inspiration and initial framework).
- Added support for missing SSL_set_options() values.
- Updated stunnel.spec to support RHEL8.
* Bugfixes
- Fixed OpenSSL 3.0 build.
- Fixed reloading configuration with
"systemctl reload stunnel.service".
- Fixed incorrect messages logged for OpenSSL errors.
- Fixed printing IPv6 socket option defaults on FreeBSD.
### Version 5.60, 2021.08.16, urgency: LOW
* New features
- New 'sessionResume' service-level option to allow
or disallow session resumption
- Added support for the new SSL_set_options() values.
- Download fresh ca-certs.pem for each new release.
* Bugfixes
- Fixed 'redirect' with 'protocol'. This combination is
not supported by 'smtp', 'pop3' and 'imap' protocols.
- Enforced minimum WIN32 log window size.
- Fixed support for password-protected private keys with
OpenSSL 3.0 (thx to Dmitry Belyavskiy).
### Version 5.59, 2021.04.05, urgency: HIGH
* Security bugfixes
- OpenSSL DLLs updated to version 1.1.1k.
* New features
- Client-side "protocol = ldap" support (thx to Bart
Dopheide and Seth Grover).
* Bugfixes
- The test suite fixed not to require external connectivity.
- Fixed paths in generated manuals (thx to Tatsuki Makino).
- Fixed configuration reload when compression is used.
- Fixed compilation with early releases of OpenSSL 1.1.1.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- Update of lfs PAK_VER from 82 to 83
- Update of rootfiles for each architecture
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
