This change make it possible to use a macvtap interface as a
standard interface (green0).
This is required by libvirt, because libvirt adds macvtap interfaces to
the physical interface, but this causes a problem. A VM with this
configuration can communicate with the whole network,
but not with the Host (IPFire).
To solve this problem, the host interface must be also a macvtap interface.
This is achieved by:
1. In /var/ipfire/ethernet/settings the mode of a interface could set
with GREEN_MODE= ...
When the mode is macvtap the physical interface is renamed to green0phys
instead of green0. If the mode is not set the normal configuration is
applied .
2. The network-hotplug-macvtap script checks if a physical nic ends
with "phys".
When the interface ends with "phys", the script adds a macvtap interface
to the physical nic which is named green0. The MAC address of this
interface is set to the MAC address of the physical nic. The MAC address
of the physical is set to a random value. We do this because the MAC
address of green0 should not change.
All services, IP addresses then binds to the macvatap interface, the
physical nic is not used.
PS.: The script works also with the orange or blue interface, just
replace green with orange or blue.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This update will pull in rpcbind as new dependency which
will automatically remove portmap when installed.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Portmap is not maintained anymore that's why it is replaced by rpcbind.
Rpcbind provides also rpcinfo which is quite useful for debugging.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Update from 'dnsmasq 2.76test10' to '2.76test13'
Includes latest patches (001-006) from upstream.
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Removed unecessary quotations and two configure-options, see:
ftp://ftp.fu-berlin.de/unix/www/squid/archive/3.1/squid-3.1.0.16-RELEASENOTES.html
--with-aio
Deprecated. POSIX AIO is now auto-detected and enabled.
Use --without-aio to disable, but only if you really have to.
--with-pthreads
Deprecated. pthreads library is now auto-detected and enabled.
Use --without-pthreads to disable, but only if you really have to.
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
the file update the bootdevice to uuid in fstab and grub1 config.
this is not needed since we use uuid at default and grub2
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
fixes: #11103
Signed-off-by: Alexander Marx <alexander.marx@ipfire.org>
The 2016d release of the tz code and data is available. It reflects the
following changes, which were either circulated on the tz mailing list
or are relatively minor technical or administrative changes:
Changes affecting future time stamps
America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
(Thanks to Alexander Krivenyshev for the heads-up.)
Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00.
(Thanks to Alexander Krivenyshev and Matt Johnson.)
New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers
Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
at 02:00. (Thanks to Stepan Golosunov.)
Changes affecting past time stamps
New zone Europe/Kirov, split off from Europe/Volgograd. It covers
Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on
1989-03-26 at 02:00, roughly a year after Europe/Volgograd made
the same change. (Thanks to Stepan Golosunov.)
Russia and nearby locations had daylight-saving transitions on
1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on
1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan
Golosunov.)
Many corrections to historical time in Kazakhstan from 1991
through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's
invented time zone abbreviations with numeric abbreviations.
Here are links to the release files:
ftp://ftp.iana.org/tz/releases/tzcode2016d.tar.gz
ftp://ftp.iana.org/tz/releases/tzdata2016d.tar.gz
The files are also available via HTTP as follows:
http://www.iana.org/time-zones/repository/releases/tzcode2016d.tar.gzhttp://www.iana.org/time-zones/repository/releases/tzdata2016d.tar.gz
As usual, links to the latest release files are here:
http://www.iana.org/time-zones/repository/tzcode-latest.tar.gzhttp://www.iana.org/time-zones/repository/tzdata-latest.tar.gz
ftp://ftp.iana.org/tz/tzcode-latest.tar.gz
ftp://ftp.iana.org/tz/tzdata-latest.tar.gz
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This patch updates the ncurses to 6.0. The old 5.9 are renamed to ncurses-compat.
The compat makes the old libs maintainable and the compat rootfile is cleaned up.
The 6.0 is build after 5.9 and all IPFire componentes will build with 6.0
In version 6 only the wide-character libraries are build. The are usable
in both multibyte and traditional 8-bit locales while normal libraries work
properly only in 8-bit locales. The toolchain is only bild with 6.0.
Please ignore my first ncurses 6.0 patch.
Signed-off-by: Marcel Lorenz <marcel.lorenz@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The 'configure'-options were sorted (kind of) to get a better overview.
Added latest patches from upstream.
Changed '--enable-async-io=8' to '--enable-async-io=16' because of
http://www.squid-cache.org/mail-archive/squid-users/200705/0768.html :
"The default number of threads is dependent on the number of aufs
cache_dir lines, based on a reasonable estimate of how the code behaves."
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
