- Update from 1.28.9 to 1.28 10
- Update rootfile
- Changelog
CHANGES IN V1.28.10
- Sample PPDs: Add borderless page size definitions to Generic
PDF Printer, HP Color LaserJet CM3530 MFP PDF, and Ricoh PDF
Printer PPD files.
- Sample PPDs: From the PDF PPD files removed the unneeded
"*cupsFilters2: ..." line. For CUPS it does not make any
difference.
- libcupsfilters: Fixed pdftopdf filter to correctly support
page ranges without upper limit, like "10-" (Pull request
#399).
- libcupsfilters: Use wildcard tag (IPP_TAG_ZERO) search for
"media-type" and "media-type-supported" in the PPD
generator (Pull request #398).
- implicitclass, parallel: Added missing newlines at error
messages.
- libfontembed: Removed unneeded fontembed/main.c and ttfread
executable. Eliminates the dependency on DejaVuSans.ttf
(Issue #386).
- gstoraster: Refactor the filter a little to clarify handling
of page counts and set job-impressions for TotalPageCount in
PWG-Raster header (Pull request #394).
- cups-browsed: Make NotifLeaseDuration configurable and renew
after half the lease duration not 60 sec before end. The
early renewal improves reliability on busy systems a
lot. For easier development and debugging short durations
from 300 sec on can get selected (Pull request #378).
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Addition of mdadm module to logwatch
- Addition of logwatch to sudoers list to run mdadm commands
- patch to change logwatch mdadm.conf to allow scan for raid drives, change mdadm script
to run mdadm scan commands with sudo, allow clean but degraded drives to be listed
in the output.
Fixes: 12080
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from 9.54 to 9.55.0
- Update rootfile
- Changelog
Version 9.55.0 (2021-09-27)
Highlights in this release include:
This release includes the fix for the %pipe% security issue (CVE-2021-3781).
New PDF Interpreter: This is an entirely new implementation written in C (rather
than PostScript, as before). For a full discussion of this change and reasons for
it see: Changes Coming to the PDF Interpreter.
In this (9.55.0) release, the new PDF interpreter is disabled by default in
Ghostscript, but can be used by specifying -dNEWPDF. We hope to make it the
default in 9.56.0, and fully deprecate the PostScript implementation shortly
after that (depending on the feedback we get).
This also allows us to offer a new executable (gpdf, or gpdfwin??.exe on Windows)
which is purely for PDF input. For this release, those new binaries are not
included in the "install" make targets, nor in the Windows installers (they will
be from 9.56.0 onwards).
We would ask that as many users as possible take the opportunity to test with the
new PDF implementation (i.e. using -dNEWPDF on your gs command line), and discuss
any problems with us, before the new implementation becomes the default.
The pdfwrite device now supports "passthrough" for JPX/JPG2000 data images (as
well as the already supported JPEG/DCT Encoded). That means that if no rescaling
or color conversion of the image data is required, the encoded/compressed image
data from the input file will be written unchanged to the output, preventing
potential image degradation caused by decompressing and recompressing.
The Ghostscript/GhostPDL demo apps for C, C#, Java and Python have all had
improvements and the C#/Java/Python language bindings have now been documented,
see Ghostscript Language Bindings
The Zugferd compliant PDF generating definitions (lib/zugferd.ps) have been
updated and expanded to support the current version (2.1.1) of the Zugferd spec,
and optionally different versions of the specification.
The PCL/m output devices now support Duplex/Tumble.
The internal support for "n-up" style simple imposition (introduced in 9.54.0) has
been extended and improved for better support across all input formats.
Ghostscript now supports object specific halftone - for example, different
halftones can be specified for text and images, reflecting the differing needs of
rendering those two types of object.
Our efforts in code hygiene and maintainability continue.
The usual round of bug fixes, compatibility changes, and incremental improvements.
(9.53.0) We have added the capability to build with the Tesseract OCR engine. In
such a build, new devices are available (pdfocr8/pdfocr24/pdfocr32) which render
the output file to an image, OCR that image, and output the image "wrapped" up as
a PDF file, with the OCR generated text information included as "invisible" text
(in PDF terms, text rendering mode 3).
Mainly due to time constraints, we only support including Tesseract from source
included in our release packages, and not linking to Tesseract/Leptonica shared
libraries. Whether we add this capability will be largely dependent on community
demand for the feature.
See Enabling OCR for more details.
For a list of open issues, or to report problems, please visit bugs.ghostscript.com.
Incompatible changes
(9.55.0) Changes to the device API. This will affect developers and maintainers of
Ghostscript devices. Firstly, and most importantly, the way device-specific
"procs" are specified has been rewritten to make it (we think!) clearer and less
confusing. See The Interface between Ghostscript and Device Drivers and The Great
Device Rework Of 2021 for more details.
(9.55.0) The command line options -sGraphicsICCProfile=___, -dGraphicsIntent=#,
-dGraphicsBlackPt=#, -dGraphicsKPreserve=# have been changed to
-sVectorICCProfile=___, -dVectorIntent=#, -dVectorBlackPt=#,
-dVectorKPreserve=#.
From 9.55.0 onwards, in recognition of how unwieldy very large HTML files can become
(History9.html had reached 8.1Mb!), we intend to only include the summary
highlights (above).
For anyone wanting the full details of the changes in a release, we ask them to look
at the history in our public git repository: ghostpdl-9.55.0 log.
If this change does not draw negative feedback, History?.htm file(s) will be removed
from the release archives.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from 4.14.0.2 to 4.14.0.4
- Update of rootfile
- Changelog
v4.14.0.4 Release date: 2021-09-17
Changed:
Rebased with official coreboot repository commit d9f5d90
Enabled EHCI controller by default on apu3-apu6 platforms
Updated sortbootorder to v4.6.22
Added:
Safeguard against setting watchdog timeout too low
Known issues:
apuled driver doesn't work in FreeBSD. Check the GPIOs document for workaround.
Some PCIe cards are not detected on certain OSes and/or in certain mPCIe slots.
Check the mPCIe modules document for solution/workaround.
Booting with 2 USB 3.x sticks plugged in apu4 sometimes results in detecting
only 1 stick
Certain USB 3.x sticks happen to not appear in boot menu
Booting Xen is unstable
v4.14.0.3 Release date: 2021-08-06
Changed:
Rebased with official coreboot repository commit c049c80
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Create lfs and rootfile
- Add exfatprogs to make.sh
- exfat is supported as a native kernel module since kernel 5.7
- This package requires CONFIG_EXFAT_FS=m to be set for the kernel module for each
architecture that will be supported. Currently that is only i586
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from 3.0.9 (2013) to 4.2 (2021)
- Update rootfile
- Program names changed in version 2.0.18
dosfslabel became fatlabel
dosfsck became fsck.fat
and mkdosfs became mkfs.fat
- Added --enable-compat-symlinks to ./configure command to maintain original names as
symlinks
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
If a stream cannot be identified or if suricata has decided that it
cannot do anything useful any more (e.g. TLS sessions after the
handshake), we will allow suricata to bypass any following packets in
that flow
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Tested-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
An error message is still shown although there is no option to disable
DNSSEC at the moment. The old marker file could still be present on
older machines.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Final patch for removal of python2 from IPFire. This can be implemented in an
appropriate Core Update after all other python2 related patches have been implemented
and confirmed working.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Acked-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
'bandwith...' should be 'bandwidth...'.
Despite being my favourite typo for the past few years(?),
today I decided to try to say 'Goodbye' to an old friend.
Similar to 'MB writen' its hard but I think it just about time.
'qos' and 'guardian' will never be the same for me... ;-)
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This package adds an ASNBL helper for detecting Fast Flux setups and
selectively announced networks (i. e. FQDNs resolving to IP addresses
not being announced by an Autonomous System) to the distribution.
Afterwards, the helper script is located at /usr/bin/asnbl-helper.py .
The second version of this patch updates squid-asnbl to upstream version
0.2.2, improving logging in case of detected Fast Flux setups.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This is a handy tool which can help debugging any problems and should be
part of the distribution.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This change is necessary because we are using the right-hand two bytes
for storing the QoS classes.
All IPsec traffic will now be skipped and never classified by the QoS.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This will significantly reduce the load when classifying outgoing
traffic as there won't be any overhead as soon as the connection has
been classified. The classficiation is being stored in the iptables MARK
which will be copied to CONNMARK if changed.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This feature has to go in order to take advantage of CONNMARK which will
drastically decrease CPU load when passing packets.
We no longer will see every packet in the QOS-INC chain in order to
change classification of that packet. It is also party counter-intuitive
to have parts of one connection in one class and the corresponding ACK
packets in another.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
In order to not deal with any marks from NAT and the IPS, this patch
adds masks to all places where packets are being marked for individual
QoS classes.
Instead of being able to use the "fw" match in tc, we have to use the
u32 to apply the mask.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
