- Update from version 11.7.0 to 11.9.0
- Update of rootfile
- Changelog
11.9.0
* Add ENABLE_COVERAGE cmake option to assist with generating
coverage reports.
* From M. Holger: add QPDFObjectHandle::writeJSON to directly
write a JSON representation to a pipeline. This is much faster
than writing the serialized result of getJSON.
* The previous fix to #1056 was incomplete. When setting a check
box value, the previous fix allowed any value other than /Off to
mean checked. Now we also set the actual value based on the
allowable non-/Off value in the normal appearance dictionary.
Fixes#1056.
* Add fuzz testing for JSON.
* Add JSON::getDictItem (from m-holger)
* Allow --overlay and --underlay to be repeated. They may appear
multiple times on the command-line and will be stacked in the
order in which they appear. In QPDFJob JSON, the overlay and
underlay keys may contain arrays. For compatibility, they may also
contain a single dictionary.
* Add new command-line arguments --file and --range which can be
used within --pages in place of positional arguments. Allow --file
to be used inside of --overlay and --underlay as well. These new
options can be freely intermixed with positional arguments. Also
add file(), range(), and password() to QPDFJob::PagesConfig as an
alternative to pageSpec.
11.8.0
* Bug fix: treat references to older generations of objects as
null.
* When recovering a file's xref table, attempt to find xref
streams if a traditional trailer dictionary is not found. Fixes
#1103.
* Add --set-page-labels command-line argument and supporting API.
Fixes#939.
- QPDFJob::Config::setPageLabels
- pdf_page_label_e enumerated type
- QPDFPageLabelDocumentHelper::pageLabelDict
* Support comma-separated numeric values with --collate to select
different group sizes from different files. Fixes#505.
* Support "x" before a group in a numeric range to exclude a group
from the previous group. Details are in the manual. Fixes#564,
#790.
* When flattening annotations, preserve annotations without any
appearance information at all, such as types /Link, /Popup, and
/Projection. Fixes#1039.
* Detect overlong UTF-8 in the UTF-8 decoder, and fix detection of
8-bit characters in erroneous UTF-8 strings.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 0.43.0 to 0.43.4
- Update of rootfile
- Changelog
0.43.4
Revert the changes to fix the problem in big-endian architectures
Allow to build pixman on clang/arm32
pixman-arm: Fix build on clang/arm32
pixman-x86: Use cpuid.h header
pixman-x86: Move #include "cpuid.h" inside conditionals
Revert "Allow to build pixman on clang/arm32"
pixman-arm: Use unified syntax
0.43.2
Note, in the past pixman used a numbering scheme with odd minor number
numbers for development versions and even minor number for stable
versions. This is no longer the case, all releases (including this one)
are stable production versions now.
Drop automatic DEBUG define
Drop ChangeLog
Drop contrib/ci.sh
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.10.0 to 3.11.1
- Update of rootfile
- Changelog
3.11.1
* Fixed wrong API version in lib/pci.h.
* Updated README.Windows.
* Fix compilation on Windows.
3.11.0
* update-pciids now supports XZ compression. If libpci is configured
with support for compression, all downloaded files are recompressed
as gzip. Otherwise they are stored as plain text.
* update-pciids now sends itself as the User-Agent.
* Added a pcilmr utility for PCIe lane margining. Thanks to Nikita
Proshkin for contributing it.
* Re-factored access to i386 ports on all relevant platforms.
* Added i386 port access on OpenBSD.
* Back-ends for Windows received many bug fixes and improvements.
* ECAM back-end now scans ACPI and BIOS memory faster.
* Linux systems without pread/pwrite are no longer supported
as they are hopefully long gone. This helps avoid the tricky check
for presence of pread which was found to fail on musl libc.
* Improved decoding of PCIe control and status registers.
* Decoding of CXL capabilities now supports up to CXL 3.0.
* lspci now displays interrupt message numbers consistently across
different capabilities.
* Cache of IDs resolved via DNS, which was located in ~/.pci-ids
by default, is now stored according to the XDG base directory
specification in $XDG_CACHE_HOME/pci-ids.
* All source files now have SPDX license identifiers.
* Internal: The "aux" fields of structs pci_access and pci_dev
reserved for use by back-ends were renamed to backend_data to better
reflect their meaning.
* As usually, various minor bug fixes and updated pci.ids.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.50.13 to 1.52.0
- Update of rootfile
- Changelog
1.52.0
- Add pango_font_map_reload_font
- Improve formatting of font sizes
1.51.2
- Build improvements on Windows
- Use single fontconfig thread
- Fix problems with spaces at line ends
- Allow custom fonts on Windows
- pango-viewer: Fix hint-metrics options
- Pangofont: Add properties
1.51.0
- itemize: Improve script itemization
- build: Check for cairo DWrite dependency
- win32: Fix various issues and crashes
- layout: Add a missing switch case
1.50.14
- Fix underline thickness in scaled contexts
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 6.2.0 to 6.2.1
- Update of rootfile
- Changelog
2.6.1 Thu February 29 2024
Bug fixes:
#817 Make tests independent of CPU speed, and thus more robust
#828#836 Expose billion laughs API with XML_DTD defined and
XML_GE undefined, regression from 2.6.0
Other changes:
#829 Hide test-only code behind new internal macro
#833 Autotools: Reject expat_config.h.in defining SIZEOF_VOID_P
#819 Address compiler warnings
#832#834 Version info bumped from 10:0:9 (libexpat*.so.1.9.0)
to 10:1:9 (libexpat*.so.1.9.1); see https://verbump.de/
for what these numbers do
Infrastructure:
#818 CI: Adapt to breaking changes in clang-format
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 6.3 to 6.7
- Update of rootfile not required
- Changelog
6.7 - January 29, 2024
* Feature: support for setting TCP data split
* Fix: fix new gcc14 warning
* Fix: fix SFF-8472 transceiver module identification (-m)
* Misc: code cleanup
6.6 - November 23, 2023
* Feature: support for more CMIS transceiver modules (-m)
* Fix: fix build on systems with old kernel uapi headers
6.5 - September 12, 2023
* Feature: register dump for hns3 driver (-d)
* Fix: fix fallback to ioctl for sset (-s)
* Fix: fix empty slot search in rmgr (-N)
6.4 - July 1, 2023
* Feature: get/set Tx push buffer length (-G)
* Feature: sff-8636 and cmis: report LOL / LOS / Tx Fault (-m)
* Fix: fix duplex setting parser (-s)
* Misc: check and require C11 language standard
* Misc: clean up obsolete pre-build checks
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Adds Zabbix Agent userparameters `ipfire.ovpn.clientcert` and `ipfire.ovpn.cacert` for the agent to get details about openvpn client, server and ca certificates.
- Moves all `ipfire.ovpn.*` userparameters to a separate config file `userparameter_ovpn.conf` to enable users to selectively disable openvpn items when not needed
- Includes `ipfire_certificate_detail.sh` script in sudoers for Zabbix Agent as it needs root permission to read openvpn certificate details.
- Adapts lfs install script to install new script and configfile
- Adds new script and configfile to rootfiles
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 4.14.3 to 4.14.5
- Update of rootfile not required
- Changelog
4.14.5
Build system:
Fix regression introduced in 4.14.4, due to a typo. chgpasswd had
been deleted from a Makefile variable, but it should have been
chpasswd.
4.14.4
Build system:
Link correctly with libdl.
Install pam configs for chpasswd(8) and newusers(8) when using
./configure --with-libpam --disable-account-tools-setuid.
libshadow:
Fix build error (parameter name omitted).
Fix off-by-one bug.
Remove warning.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 4.19.3 to 4.19.5
- Update of rootfile not required
- Changelog
4.19.5
* BUG 13688: Windows 2016 fails to restore previous version of a file from a
shadow_copy2 snapshot.
* BUG 15549: Symlinks on AIX are broken in 4.19 (and a few version before
that).
* BUG 12421: Fake directory create times has no effect.
* BUG 15550: ctime mixed up with mtime by smbd.
* BUG 15548: samba-gpupdate --rsop fails if machine is not in a site.
* BUG 15557: gpupdate: The root cert import when NDES is not available is
broken.
* BUG 15552: samba-gpupdate should print a useful message if cepces-submit
can't be found.
* BUG 15558: samba-gpupdate logging doesn't work.
* BUG 15555: smbpasswd reset permissions only if not 0600.
4.19.4
* BUG 13577: net changesecretpw cannot set the machine account password if
secrets.tdb is empty.
* BUG 15540: For generating doc, take, if defined, env XML_CATALOG_FILES.
* BUG 15541: Trivial C typo in nsswitch/winbind_nss_netbsd.c.
* BUG 15542: vfs_linux_xfs is incorrectly named.
* BUG 15377: systemd stumbled over copyright-message at smbd startup.
* BUG 15505: Following intermediate abolute share-local symlinks is broken.
* BUG 15523: ctdb RELEASE_IP causes a crash in release_ip if a connection to
a non-public address disconnects first.
* BUG 15544: shadow_copy2 broken when current fileset's directories are
removed.
* BUG 15377: systemd stumbled over copyright-message at smbd startup.
* BUG 15523: ctdb RELEASE_IP causes a crash in release_ip if a connection to
a non-public address disconnects first.
* BUG 15534: smbd does not detect ctdb public ipv6 addresses for multichannel
exclusion.
* BUG 15469: 'force user = localunixuser' doesn't work if 'allow trusted
domains = no' is set.
* BUG 15525: smbget debug logging doesn't work.
* BUG 15532: smget: username in the smburl and interactive password entry
doesn't work.
* BUG 15538: smbget auth function doesn't set values for password prompt
correctly.
* BUG 15523: ctdb RELEASE_IP causes a crash in release_ip if a connection to
a non-public address disconnects first.
* BUG 15440: Unable to copy and write files from clients to Ceph cluster via
SMB Linux gateway with Ceph VFS module.
* BUG 15547: Multichannel refresh network information.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.4.61 to 1.4.62
- Update of rootfile not required
- Changelog
1.6.42
Fixed the implementation of the macro function png_check_sig().
This was an API regression, introduced in libpng-1.6.41.
(Reported by Matthieu Darbois)
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.47 to 1.48
- Update of rootfile
- Changelog
1.48
* New configure option --with-libtool-modification. [T6619]
* New option parser flag to detect commands given without a double
dash. There is also the new meta command "command-mode" to set
this flag via a config file. [T6978]
* Added an es_fopen mode flag "sequential" with support on Windows.
[rE7a42ff0ec9]
* Added an es_fopen mode flag "wipe" to cleanup internal buffers at
close time. [T6954]
* New function gpgrt_wipememory. [T6964]
* Improvements to setenv on Windows. [rE89e53ad90f]
* Fixed call to estream-printf string filters. [T6737]
* Many improvements to the yat2m tool.
* Updates to the build system.
* Interface changes relative to the 1.47 release:
ARGPARSE_FLAG_COMMAND NEW.
gpgrt_wipememory NEW.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.4.4 to 3.4.6
- Update of rootfile
- Changelog
3.4.6
Fix long double regression on mips64 and alpha.
3.4.5
Add support for wasm32.
Add support for aarch64 branch target identification (bti).
Add support for ARCv3: ARC32 & ARC64.
Add support for HPPA64, and many HPPA fixes.
Add support for Haikuos on PowerPC.
Fixes for AIX, loongson, MIPS, power, sparc64, and x86 Darwin.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.0.9 to 1.0.10
- Update of rootfile not required
- Changelog
1.0.10
- Fixed problem that caused sgdisk to crash with errors about being unable
to read the disk's partition table when compiled with the latest popt
(commit 740, which is pre-release as I type; presumably version 1.19 and
later once released).
- Updated guid.cc to deal with minor change in libuuid.
- Fixed potential NULL derefernce bug in sgdisk. Thanks to Damian Kurek
for this fix.
- The partition number of "0" can now be used to reference newly-created
partitions when the --largest-new=0 option to sgdisk is used. Thanks to
David Joaquín Shourabi Porcel for this improvement.
- Make explicit casts in gptcurses.cc to eliminate compiler warnings about
mis-matched types in printw() statements.
- Minor code cleanup based on valgrind analysis.
- In previous versions, GPT fdisk accepted only integer values for partition
start points, end points, and sizes, and it interpreted decimal values
incorrectly. That is, if you typed "+9.5G" as the partition end point,
you'd end up with something just 9 sectors in size. This version now
truncates decimal numbers to their integral values, so you'd get a 9 GiB
partition instead.
- Changes to optimize disk handling, particularly on Windows, courtesy of
Frediano Ziglio.
- Added numerous new partition type codes from Discoverable Partitions
Specification
(https://uapi-group.org/specifications/specs/discoverable_partitions_specification/).
- Added new sgdisk -k/--move-backup-table and gdisk k (on the experts' menu)
option to relocate the backup partition table. This is the counterpart of
the sgdisk -j/--move-main-table and gdisk j (on the experts' menu) option
to move the main partition table. This code comes from Niklas Gollenstede.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 2.43.0 to 2.44.0
- Update of rootfile
- Changelog is too large to include here.
See the files 2.43.1.txt, 2.43.2.txt, 2.43.3.txt & 2.44.0.txt in the source tarball in
directory Documentation/RelNotes
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
We disable cores if the are affected by some cpu vulnerabilities
this cores report errors if you try to change the settings.
So only print the output for core0 and hide it for all cores.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
the initskript loads a test-modul for amd-pstate (which traces on intel)
and off course reports errors if firmware settings are missing.
this also fix the error at start because also amd-pstate doesn't support
ondemand mode.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- OpenSSL was updated to 3.1.4 in CU181 and to 3.2.1 in CU183 but in both cases freeradius
was not incremented to cause it to be shipped.
- This patch increments the freeradius PAK_VER to ensure it will be shipped.
Fixes: Bug#13590
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
we had discussed this on december telco but it is not so
easy because our menusystem only shows entry's existing cgi's.
so i add a cgi redirect to http://$ENV{SERVER_ADDR}:3000
this add the entry under pakfire and also to service page.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 6.0.15 to 7.0.2
- Update of rootfile
- suricata 7.0.2 requires libhtp >= 0.5.45
it also requires libelf.so.1 for execution. Previous suricata versions only required
libelf for building. libelf or elfutils are not mentioned anywhere in the changelog
- Without elfutils available during starting then suricata fails to start due to
libelf.so.1 not being available.
- Tested out suricata7 with elfutils on my vm testbed and it successfully started.
- The suricata-5.0.8 patch has been removed as it got applied to configure.ac but this
is not available in suricata-7.0.2. It looks like that patch was never actually used in
suricata as all the builds I checked used the configure file from the source tarball
and the configure was never created by running autoconf on the configure.ac
- Changelog is too large to include here. Details can be found in the ChangeLog file in
the source tarball
Fixes: Bug#13516
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://blog.clamav.net/2023/11/clamav-130-122-105-released.html
Excerpts from changelog:
"Major changes
Added support for extracting and scanning attachments found in
Microsoft OneNote section files. OneNote parsing will be enabled by
default, but may be optionally disabled using one of the following
options:
a. The clamscan command line option: --scan-onenote=no,
b. The clamd.conf config option: ScanOneNote no,
c. The libclamav scan option options.parse &= ~CL_SCAN_PARSE_ONENOTE;,
d. A signature change to the daily.cfg dynamic configuration (DCONF).
Other improvements
Fixed issue when building ClamAV on the Haiku (BeOS-like) operating
system. Patch courtesy of Luca D'Amico
ClamD: When starting, ClamD will now check if the directory specified
by TemporaryDirectory in clamd.conf exists. If it doesn't, ClamD will
print an error message and will exit with exit code 1. Patch courtesy
of Andrew Kiggins.
CMake: If configured to build static libraries, CMake will now also
install the libclamav_rust, libclammspack, libclamunrar_iface, and
libclamunrar static libraries required by libclamav.
Note: These libraries are all linked into the clamscan, clamd, sigtool,
and freshclam programs, which is why they did not need to be installed
to function. However, these libraries would be required if you wish to
build some other program that uses the libclamav static library.
Added file type recognition for compiled Python (`.pyc`) files.
The file type appears as a string parameter for these callback
functions:
- clcb_pre_cache
- clcb_pre_scan
- clcb_file_inspection
When scanning a `.pyc` file, the `type` parameter will now show
"CL_TYPE_PYTHON_COMPILED" instead of "CL_TYPE_BINARY_DATA".
Improved support for decrypting PDFs with empty passwords.
Assorted minor improvements and typo fixes.
Bug fixes
Fixed a warning when scanning some HTML files.
Fixed an issue decrypting some PDF's with an empty password.
ClamOnAcc: Fixed an infinite loop when a watched directory does not
exist.
ClamOnAcc: Fixed an infinite loop when a file has been deleted before a
scan.
Patch courtesy of gsuehiro.
Fixed a possible crash when processing VBA files on HP-UX/IA 64bit.
Patch courtesy of Albert Chin-A-Young.
ClamConf: Fixed an issue printing `MaxScanSize` introduced with the
change to allow a `MaxScanSize` greater than 4 GB.
Fix courtesy of teoberi.
Fixed an issue building a ClamAV RPM in some configurations.
The issue was caused by faulty CMake logic that intended to create an
empty database directory during the installation."
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 2.5.0 to 2.6.0
- Update of rootfile
- This update fixes two CVE's. Not sure if IPFire would be vulnerable or not but safer
to update anyway.
- Changelog
2.6.0
Security fixes:
#789#814 CVE-2023-52425 -- Fix quadratic runtime issues with big tokens
that can cause denial of service, in partial where
dealing with compressed XML input. Applications
that parsed a document in one go -- a single call to
functions XML_Parse or XML_ParseBuffer -- were not affected.
The smaller the chunks/buffers you use for parsing
previously, the bigger the problem prior to the fix.
Backporters should be careful to no omit parts of
pull request #789 and to include earlier pull request #771,
in order to not break the fix.
#777 CVE-2023-52426 -- Fix billion laughs attacks for users
compiling *without* XML_DTD defined (which is not common).
Users with XML_DTD defined have been protected since
Expat >=2.4.0 (and that was CVE-2013-0340 back then).
Bug fixes:
#753 Fix parse-size-dependent "invalid token" error for
external entities that start with a byte order mark
#780 Fix NULL pointer dereference in setContext via
XML_ExternalEntityParserCreate for compilation with
XML_DTD undefined
#812#813 Protect against closing entities out of order
Other changes:
#723 Improve support for arc4random/arc4random_buf
#771#788 Improve buffer growth in XML_GetBuffer and XML_Parse
#761#770 xmlwf: Support --help and --version
#759#770 xmlwf: Support custom buffer size for XML_GetBuffer and read
#744 xmlwf: Improve language and URL clickability in help output
#673 examples: Add new example "element_declarations.c"
#764 Be stricter about macro XML_CONTEXT_BYTES at build time
#765 Make inclusion to expat_config.h consistent
#726#727 Autotools: configure.ac: Support --disable-maintainer-mode
#678#705 ..
#706#733#792 Autotools: Sync CMake templates with CMake 3.26
#795 Autotools: Make installation of shipped man page doc/xmlwf.1
independent of docbook2man availability
#815 Autotools|CMake: Add missing -DXML_STATIC to pkg-config file
section "Cflags.private" in order to fix compilation
against static libexpat using pkg-config on Windows
#724#751 Autotools|CMake: Require a C99 compiler
(a de-facto requirement already since Expat 2.2.2 of 2017)
#793 Autotools|CMake: Fix PACKAGE_BUGREPORT variable
#750#786 Autotools|CMake: Make test suite require a C++11 compiler
#749 CMake: Require CMake >=3.5.0
#672 CMake: Lowercase off_t and size_t to help a bug in Meson
#746 CMake: Sort xmlwf sources alphabetically
#785 CMake|Windows: Fix generation of DLL file version info
#790 CMake: Build tests/benchmark/benchmark.c as well for
a build with -DEXPAT_BUILD_TESTS=ON
#745#757 docs: Document the importance of isFinal + adjust tests
accordingly
#736 docs: Improve use of "NULL" and "null"
#713 docs: Be specific about version of XML (XML 1.0r4)
and version of C (C99); (XML 1.0r5 will need a sponsor.)
#762 docs: reference.html: Promote function XML_ParseBuffer more
#779 docs: reference.html: Add HTML anchors to XML_* macros
#760 docs: reference.html: Upgrade to OK.css 1.2.0
#763#739 docs: Fix typos
#696 docs|CI: Use HTTPS URLs instead of HTTP at various places
#669#670 ..
#692#703 ..
#733#772 Address compiler warnings
#798#800 Address clang-tidy warnings
#775#776 Version info bumped from 9:10:8 (libexpat*.so.1.8.10)
to 10:0:9 (libexpat*.so.1.9.0); see https://verbump.de/
for what these numbers do
Infrastructure:
#700#701 docs: Document security policy in file SECURITY.md
#766 docs: Improve parse buffer variables in-code documentation
#674#738 ..
#740#747 ..
#748#781#782 Refactor coverage and conformance tests
#714#716 Refactor debug level variables to unsigned long
#671 Improve handling of empty environment variable value
in function getDebugLevel (without visible user effect)
#755#774 ..
#758#783 ..
#784#787 tests: Improve test coverage with regard to parse chunk size
#660#797#801 Fuzzing: Improve fuzzing coverage
#367#799 Fuzzing|CI: Start running OSS-Fuzz fuzzing regression tests
#698#721 CI: Resolve some Travis CI leftovers
#669 CI: Be robust towards absence of Git tags
#693#694 CI: Set permissions to "contents: read" for security
#709 CI: Pin all GitHub Actions to specific commits for security
#739 CI: Reject spelling errors using codespell
#798 CI: Enforce clang-tidy clean code
#773#808 ..
#809#810 CI: Upgrade Clang from 15 to 18
#796 CI: Start using Clang's Control Flow Integrity sanitizer
#675#720#722 CI: Adapt to breaking changes in GitHub Actions Ubuntu images
#689 CI: Adapt to breaking changes in Clang/LLVM Debian packaging
#763 CI: Adapt to breaking changes in codespell
#803 CI: Adapt to breaking changes in Cppcheck
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
