- Update from version 11.7.0 to 11.9.0
- Update of rootfile
- Changelog
11.9.0
* Add ENABLE_COVERAGE cmake option to assist with generating
coverage reports.
* From M. Holger: add QPDFObjectHandle::writeJSON to directly
write a JSON representation to a pipeline. This is much faster
than writing the serialized result of getJSON.
* The previous fix to #1056 was incomplete. When setting a check
box value, the previous fix allowed any value other than /Off to
mean checked. Now we also set the actual value based on the
allowable non-/Off value in the normal appearance dictionary.
Fixes#1056.
* Add fuzz testing for JSON.
* Add JSON::getDictItem (from m-holger)
* Allow --overlay and --underlay to be repeated. They may appear
multiple times on the command-line and will be stacked in the
order in which they appear. In QPDFJob JSON, the overlay and
underlay keys may contain arrays. For compatibility, they may also
contain a single dictionary.
* Add new command-line arguments --file and --range which can be
used within --pages in place of positional arguments. Allow --file
to be used inside of --overlay and --underlay as well. These new
options can be freely intermixed with positional arguments. Also
add file(), range(), and password() to QPDFJob::PagesConfig as an
alternative to pageSpec.
11.8.0
* Bug fix: treat references to older generations of objects as
null.
* When recovering a file's xref table, attempt to find xref
streams if a traditional trailer dictionary is not found. Fixes
#1103.
* Add --set-page-labels command-line argument and supporting API.
Fixes#939.
- QPDFJob::Config::setPageLabels
- pdf_page_label_e enumerated type
- QPDFPageLabelDocumentHelper::pageLabelDict
* Support comma-separated numeric values with --collate to select
different group sizes from different files. Fixes#505.
* Support "x" before a group in a numeric range to exclude a group
from the previous group. Details are in the manual. Fixes#564,
#790.
* When flattening annotations, preserve annotations without any
appearance information at all, such as types /Link, /Popup, and
/Projection. Fixes#1039.
* Detect overlong UTF-8 in the UTF-8 decoder, and fix detection of
8-bit characters in erroneous UTF-8 strings.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 0.43.0 to 0.43.4
- Update of rootfile
- Changelog
0.43.4
Revert the changes to fix the problem in big-endian architectures
Allow to build pixman on clang/arm32
pixman-arm: Fix build on clang/arm32
pixman-x86: Use cpuid.h header
pixman-x86: Move #include "cpuid.h" inside conditionals
Revert "Allow to build pixman on clang/arm32"
pixman-arm: Use unified syntax
0.43.2
Note, in the past pixman used a numbering scheme with odd minor number
numbers for development versions and even minor number for stable
versions. This is no longer the case, all releases (including this one)
are stable production versions now.
Drop automatic DEBUG define
Drop ChangeLog
Drop contrib/ci.sh
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.10.0 to 3.11.1
- Update of rootfile
- Changelog
3.11.1
* Fixed wrong API version in lib/pci.h.
* Updated README.Windows.
* Fix compilation on Windows.
3.11.0
* update-pciids now supports XZ compression. If libpci is configured
with support for compression, all downloaded files are recompressed
as gzip. Otherwise they are stored as plain text.
* update-pciids now sends itself as the User-Agent.
* Added a pcilmr utility for PCIe lane margining. Thanks to Nikita
Proshkin for contributing it.
* Re-factored access to i386 ports on all relevant platforms.
* Added i386 port access on OpenBSD.
* Back-ends for Windows received many bug fixes and improvements.
* ECAM back-end now scans ACPI and BIOS memory faster.
* Linux systems without pread/pwrite are no longer supported
as they are hopefully long gone. This helps avoid the tricky check
for presence of pread which was found to fail on musl libc.
* Improved decoding of PCIe control and status registers.
* Decoding of CXL capabilities now supports up to CXL 3.0.
* lspci now displays interrupt message numbers consistently across
different capabilities.
* Cache of IDs resolved via DNS, which was located in ~/.pci-ids
by default, is now stored according to the XDG base directory
specification in $XDG_CACHE_HOME/pci-ids.
* All source files now have SPDX license identifiers.
* Internal: The "aux" fields of structs pci_access and pci_dev
reserved for use by back-ends were renamed to backend_data to better
reflect their meaning.
* As usually, various minor bug fixes and updated pci.ids.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.50.13 to 1.52.0
- Update of rootfile
- Changelog
1.52.0
- Add pango_font_map_reload_font
- Improve formatting of font sizes
1.51.2
- Build improvements on Windows
- Use single fontconfig thread
- Fix problems with spaces at line ends
- Allow custom fonts on Windows
- pango-viewer: Fix hint-metrics options
- Pangofont: Add properties
1.51.0
- itemize: Improve script itemization
- build: Check for cairo DWrite dependency
- win32: Fix various issues and crashes
- layout: Add a missing switch case
1.50.14
- Fix underline thickness in scaled contexts
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 6.2.0 to 6.2.1
- Update of rootfile
- Changelog
2.6.1 Thu February 29 2024
Bug fixes:
#817 Make tests independent of CPU speed, and thus more robust
#828#836 Expose billion laughs API with XML_DTD defined and
XML_GE undefined, regression from 2.6.0
Other changes:
#829 Hide test-only code behind new internal macro
#833 Autotools: Reject expat_config.h.in defining SIZEOF_VOID_P
#819 Address compiler warnings
#832#834 Version info bumped from 10:0:9 (libexpat*.so.1.9.0)
to 10:1:9 (libexpat*.so.1.9.1); see https://verbump.de/
for what these numbers do
Infrastructure:
#818 CI: Adapt to breaking changes in clang-format
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- The update to openssl-3.2.x introduced a bug fix which now gives an error if the
subjectKeyIdentifier (SKID) or authorityKeyIdentifier (AKID) is in the x509 extensions
for a CSR.
- See the following discssion in the openssl github issues
https://github.com/openssl/openssl/issues/22966#issuecomment-1858396738
- The SKID & AKID should never have been specified in the CSR but due to a bug they were
never flagged with an error, just ignored. Since the bug fix for that bug was put into
OpenSSL-3.2.0 the prescence of the SKID & AKID in the CSR causes an error to be flagged.
- The consequence of this is that in CU183 trying to create a new x509 root/host
certificate gives an error when the CSR is generated so only the root certificate is
created and not the host certificate.
- Tested out the removal of the SKID & AKID lines from the [ server ] section of the
ovpn.cnf file and the root/host certificate set was created without any issue.
- Then tested the creation of a RW client connection and that worked with no problems. Also
creating a fresh N2N connection worked without any problems.
- Also tested restoring from an earlier backup. The RW and N2N connections worked without
issues with the AKID and SKID missing from the [ server ] section.
- It would be good if this could be merged into CU184 for final testing.
Fixes: Bug#13595
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- This code ensures that all existing N2N connections have no-pass in key 41 in place
of disabled for some of them.
- Tested out and confirmed on my vm testbed.
Fixes: Bug#13548
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Adds Zabbix Agent userparameters `ipfire.ovpn.clientcert` and `ipfire.ovpn.cacert` for the agent to get details about openvpn client, server and ca certificates.
- Moves all `ipfire.ovpn.*` userparameters to a separate config file `userparameter_ovpn.conf` to enable users to selectively disable openvpn items when not needed
- Includes `ipfire_certificate_detail.sh` script in sudoers for Zabbix Agent as it needs root permission to read openvpn certificate details.
- Adapts lfs install script to install new script and configfile
- Adds new script and configfile to rootfiles
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Add script to parse openssl output on certificates and return it as JSON for consumption by the Zabbix agent.
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 1.47 to 1.48
- Update of rootfile
- Changelog
1.48
* New configure option --with-libtool-modification. [T6619]
* New option parser flag to detect commands given without a double
dash. There is also the new meta command "command-mode" to set
this flag via a config file. [T6978]
* Added an es_fopen mode flag "sequential" with support on Windows.
[rE7a42ff0ec9]
* Added an es_fopen mode flag "wipe" to cleanup internal buffers at
close time. [T6954]
* New function gpgrt_wipememory. [T6964]
* Improvements to setenv on Windows. [rE89e53ad90f]
* Fixed call to estream-printf string filters. [T6737]
* Many improvements to the yat2m tool.
* Updates to the build system.
* Interface changes relative to the 1.47 release:
ARGPARSE_FLAG_COMMAND NEW.
gpgrt_wipememory NEW.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.4.4 to 3.4.6
- Update of rootfile
- Changelog
3.4.6
Fix long double regression on mips64 and alpha.
3.4.5
Add support for wasm32.
Add support for aarch64 branch target identification (bti).
Add support for ARCv3: ARC32 & ARC64.
Add support for HPPA64, and many HPPA fixes.
Add support for Haikuos on PowerPC.
Fixes for AIX, loongson, MIPS, power, sparc64, and x86 Darwin.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 2.43.0 to 2.44.0
- Update of rootfile
- Changelog is too large to include here.
See the files 2.43.1.txt, 2.43.2.txt, 2.43.3.txt & 2.44.0.txt in the source tarball in
directory Documentation/RelNotes
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Existing situation is if four new client connections are created and then it is decided
to restore to an earlier stage the new certficates will be in the certs directory but
not usable from the WUI page as they are no longer shown in the client connection table
as that now shows the ones from the restored backup.
- This patch clears the /var/ipfire/ovpn/certs/ directory before restoring the contents
of the backup so that the certs directory only holds what was in the backup.
Fixes: Bug#13404
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- The PT Attack ruleset has not been updated since 2021 and made read-only in 2022
The PT Attack website no longer has any reference to Suricata Rulesets. The PT Attack
ruleset is being removed.
- The Secureworks three rulesets are no longer available. The website path gives a 404
error. No mention of Suricata rulesets in the Secureworks website. The Secureworks three
rulesets are being removed.
- ThreatFox ruleset has been added to the list. Both a plain and archive version of the
rules are available but the plain version is being regularly updated while the archive
version was last updated 5 days ago. So this patch has implemented the plain version.
- All above was discussed in the January Developers Conference call.
- Tested out on my vm testbed. I had PT Attack selected as one of the providers. As
mentioned by Stefan removing PT Attack means it is not available in the list of
providers but the provider stays in the providers table but with the line shown in red.
I will update the wiki to mention the red highlight and what it means.
Suggested-by: Stefan Schantl <stefan.schantl@ipfire.org>
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- If a fresh install is done then only the DROP_HOSTILE_IN & DROP_HOSTILE_OUT
rrd directories are created.
- With the DROP_HOSTILE directory missing then when the fwhits graph is updated an error
message is caused by the inability to open the required files.
- This patch adds an if/else loop into the fwhits graph code to deal with the two cases
of the DROP_HOSTILE being present or not depending on the history and if a backup with
logs has been restored from when DROP_HOSTILE was in use.
- Tested on vm testbed and created a historical line for the hostile data when it was not
split
- There might be a simpler or better approach than this but it was the only option I
could identify. I couldn't find anything about being able to use if loops within the
RRD::Graph loop
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
