- Update from 3-4-0 to 3-6-0
- Update of rootfilers in each architecture
Only the library version changed in each rootfile
- Installed updated lm_sensors. Confirmed updated version was installed.
sensors-detect ran successfully but could not confirm successful sensor
detection as installation was run on vm testbed and this has no sesnors
Testing on real hardware to confirm that sensors are detected and
sensor-* directories correctly created in IPFire.
- Changelog
3.6.0 (2019-10-18)
configs: Added a number of new configuration files
fancontrol: AVERAGE env variable can be used to set the number of previ>
Makefile: The MACHINE variable has been renamed to ARCH
sensord: Add an option -1/--oneline to print chip and adapter on the sa>
sensors: Fixed a stray comma bug in the JSON output
Fixed Fahrenheit conversion with raw and JSON output
Scale voltage and current values in the default output format
sensors-detect: Add detection of AMD Family 17h, models 30h, 70h
Add detection of some AMD Family 15h models
Add detection of AMD Family 16h model 30h power sensors
Add detection of Hygon Family 18h thermal sensors
Add detection of Nuvoton NCT6797D
Add detection of Nuvoton NCT6798D
Add detection of Nuvoton NCT6112D/NCT6114D/NCT6116D
Fix printing CPU info on non-x86 arches
Fix printing lm_sensors version
Mark Fintek F75387SG/RG as supported by the f75375s dri>
3.5.0 (2018-11-23)
Fixed disappearance of certain hwmon chips with 4.19+ kernels
Add the find-driver script for debugging
Various documentation and man page improvements
Fix various issues found by Coverity Scan
Fix compilation with the musl C library
Development version string now contains "+git" instead of "+SVN"
Updated links in documentation to reflect the new home of lm_sensors
sensors.1: Add reference to sensors-detect
Document -j option (json output)
sensors: Add support for json output
Add support for power min, lcrit, min_alarm, lcrit_alarm
sensors-detect: Fix systemd paths
Add detection of Fintek F81768
Only probe I/O ports on x86
Add detection of Nuvoton NCT6793D
Add detection of Microchip MCP9808
Mark F71868A as supported by the f71882fg driver
Mark F81768D as supported by the f71882fg driver
Mark F81866D as supported by the f71882fg driver
Add detection of various ITE chips
Add detection of Nuvoton NCT6795D
Add detection of DDR4 SPD
Add detection of ITE IT8987D
Add detection of AMD Family 17h temperature sensors
Add detection of AMD KERNCZ SMBus controller
Add detection of various Intel SMBus controllers
Add detection of Giantec GT30TS00
Add detection of ONS CAT34TS02C and CAT34TS04
Add detection of AMD Family 15h Model 60+ temperature s>
Add detection of Nuvoton NCT6796D
Add detection of AMD Family 15h Model 70+ temperature s>
configs: Add sample configuration files.
sensors.conf.default: Add hardwired inputs of NCT6795D
Add hardwired inputs of F71868A
Add hardwired NCT6796D inputs
vt1211_pwm: replaced deprecated sub shell syntax
run with bash instead of sh
pwmconfig: replaced deprecated sub shell syntax
fancontrol: replaced deprecated sub shell syntax
save original pwm values
fancontrol.8: replaced deprecated sub shell syntax
libsensors: Add support for SENSORS_BUS_TYPE_SCSI
Add support for power min, lcrit, min_alarm, lcrit_alarm
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
libcrypt is deprecated in glibc, and is now explicitely disabled.
Instead we ship libxcrypt which is an alternative implemenation and can be used as a drop-in replacement.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Since more processes depend on good randomness, we need to
make sure that the kernel's PRNG is initialized as early as
possible.
For systems without a HWRNG, we will need to fall back to our
noisy loop and wait until we have enough randomness.
This patch also removes saving and restoring the seed. This
is no longer useful because the kernel's PRNG only takes any
input after it has successfully been seeded from other sources.
Hence adding this seed does not increase its randomness.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
We should initialise the kernel's PRNG as early as we can.
Starting rngd very early will seed the random number generator
when RDRAND or other hardware random number generators are available.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This script is called when an OpenVPN Roadwarrior client
connects or disconnect and logs the start and duration
of the session.
This can be used to monitor session duration and data transfer.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This file is being read by some packages to find out on what
distribution they are running on.
This file needs to be included in every Core Update.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Since Go has a horrible build system which requires a Go
compiler to build the Go compiler and takes a very long
time to compile, we are following Rust and are using the
"official" pre-compiled release tarball.
We no longer ship the Go runtime, which mitigates the
risk of shipping any malware.
Because we currently only have one package using this
and which is only being compiled for x86_64, we are
only making Go available on this architecture.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
When using a swap file, it is not being activated correctly
when the filesystem it is residing on is not mounted, yet.
The root file system is mounted read-only here before
S40mountfs is being executed.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
this functions has only reloaded unbound config
which is useless at shutting down the red interface.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
