- Update of attr causes current version of python-xattr to fail to build
- Following input from Michael Tremer
- This package was orihinally required for pakfire 3 which no longer depends on it
- This is a python 2 module. Python 2 is EOL
- lfs and rootfile removed from IPFire
- make.sh updated to remove python-xattr entry
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update ddrescue from 1.12 to 1.25
- Updated rootfiles
- Since 2013 gnu started to only use lzip for compression of ddrescue
Therefore second patch of this series is the installation of lzip
in the IPFire Build.
- Changelog
2020-02-21 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.25 released.
* block.h: Add default constructors to classes Block and Sblock.
(Reported by Rosen Penev).
* check.sh: Quote all file name variables to allow names with spaces.
(Reported by David Morrison).
* In rescue mode, join non-finished subsectors read from mapfile.
(Reported by David Burton).
* mapbook.cc (update_mapfile): Exclude writing time from intervals.
(Reported by David Burton).
* rescuebook.cc (extend_outfile_size): Use ftruncate if it works.
* Print large numbers in groups of 3 digits separated by underscores.
* main.cc: Set a valid invocation_name even if argc == 0.
2019-02-24 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.24 released.
* Added new option '--command-mode'.
* Implemented mapfile backup.
* ddrescue.texi: Documented final contents of bad areas in outfile.
* configure: Accept appending to CXXFLAGS, 'CXXFLAGS+=OPTIONS'.
2018-02-13 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.23 released.
* rescuebook.cc (trim_errors): Fix wrong change to non-scraped.
* Added new option '--same-file'.
* Added new option '--shift' to ddrescuelog.
* fillbook.cc (fill_block): Write location data as one line.
* fillbook.cc (read_buffer): Do not require a seekable infile.
* ddrescue.texi: Added chapter 'Output'.
* check.sh: Added 'combined rescue' test.
* io.cc: Added missing '#include <cstdio>'.
2017-02-03 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.22 released.
* Option '-X, --exit-on-error' replaced by '-X, --max-read-errors'.
* Added new option '--max-slow-reads'.
* Added new option '--delay-slow'.
* Added new option '--reset-slow'.
* Added new option '--log-events'.
* Added new option '--mapfile-interval'.
* Added new option '--pause-on-error'.
* Option '--pause' has been renamed to '--pause-on-pass'.
* Option '--max-errors' has been renamed to '--max-bad-areas'.
* Renamed 'errsize' to 'bad_size' and 'errors' to 'bad_areas'
* Rescuebook: Show read_errors, error_rate and slow_reads.
* Added 'current_pass' field to mapfile.
* Added two new passes (3 and 4) to the copying phase.
* main.cc (parse_cpass): Accept ranges of passes.
* Option '-K, --skip-size' now accepts sizes up to 1 EiB.
* Initial skip size now defaults to (infile_size / 100_000).
* rescuebook.cc (copy_non_tried): Don't reduce min_read_rate,
enable it only for passes 1 and 2.
* rescuebook.cc (trim_errors): Don't trim bad edges.
* main_common.cc (getnum): Accept 's' after other multiplier.
* '--ask', '-vv' now show size along with model and serial number.
* non_posix.cc: Add 'device_id' for Cygwin.
(Patch written by Christian Franke <franke@computer.org>).
* rescuebook.cc (do_rescue): Show full sizes in domain warning.
* Added new option '-A, --annotate-mapfile' to ddrescuelog.
2016-03-17 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.21 released.
* mapbook.cc (Mapbook): Fix iobuf alignment.
(Reported by Heikki Tauriainen).
* Removed short option names '-1' and '-2'.
* Allow only regular files for '--log-rates' and '--log-reads'.
* Option '-D, --odirect' now works also in fill mode.
* rescuebook.cc (copy_block): Return 1 on unaligned read error.
Set e_code on any error if verify_on_error.
* Option '-X, --exit-on-error' has been extended to all phases.
* Assigned short name '-Z' to option '--max-read-rate'.
* mapbook.cc (update_mapfile): 'fsync' the mapfile every 5 minutes.
* Rescuebook: Show full range of sizes from non-tried to finished.
* rescuebook.cc (show_status): Show percentage rescued.
* configure: Avoid warning on some shells when testing for g++.
* Makefile.in: Detect the existence of install-info.
2015-09-10 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.20 released.
* 'logfile' has been renamed to 'mapfile' everywhere.
* Changed short name of option '--synchronous' to '-y'.
* Changed long name of option '-d' to '--idirect'.
* Added new option '-D, --odirect'.
* Added new option '-J, --verify-on-error'.
* Added new option '--max-read-rate'.
* rescuebook.cc (copy_block): Copy arbitrary blocks with '--idirect'.
* Include only bad-sector blocks in 'errsize'.
* rescuebook.cc (show_status): Show the estimated remaining time.
* io.cc (format_time): Show time in days, hours, minutes and seconds.
* Added per sector location data to fill mode.
* mapbook.cc: Added emergency save of the mapfile.
* Show device name with '--ask' or '-vv' on Haiku.
* mapfile.cc (read_mapfile): Read read-only mapfiles from stdin.
* ddrescuelog.cc: Allow multiple mapfiles for '-t, --show-status'.
* ddrescuelog.cc (create_mapfile): '-' writes mapfile to stdout.
* ddrescue.texi: Added new chapter 'Optical media'.
* ddrescue.texi: Documented maximum size of the rescue domain.
* configure: Option '--enable-linux' renamed to '--enable-non-posix'.
* Makefile.in: Added new targets 'install*-compress'.
* File 'ddrescue.h' renamed to 'mapbook.h'.
* File 'logbook.cc' renamed to 'mapbook.cc'.
* File 'logfile.cc' renamed to 'mapfile.cc'.
* Files linux.{h,cc} renamed to non_posix.{h,cc}.
2014-10-03 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.19 released.
* Fixed a race condition at start of run with '--timeout=0'.
* Added new option '-P, --data-preview'.
* Added new option '-u, --unidirectional'.
* Added new option '-X, --exit-on-error'.
* Added new option '--ask' to ask for user confirmation.
* Added new option '--cpass' to select passes during copying phase.
* Added new option '--pause' to insert a pause between passes.
* Removed option '-l, --logfile-size'.
* Skip on the first error during the copying phase.
* rescuebook.cc: Trimming done in one pass, may be run in reverse.
* The splitting phase has been replaced by a scraping phase.
* Changed long name of option '-n' to '--no-scrape'.
* rescuebook.cc: Alternate direction of passes during retrying phase.
* Show ATA model and serial number with '--ask' or '-vv' on Linux.
* configure: Added new option '--enable-linux'.
* New files linux.h linux.cc.
* License changed to GPL version 2 or later.
2014-06-10 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.18.1 released.
* ddrescuelog.cc (do_logic_ops): Fixed 'or' and 'xor'.
* Added new option '-H, --test-mode' to simulate read errors.
* Added new option '-L, --loose-domain' to ddrescue and ddrescuelog.
* Added new option '-N, --no-trim' to disable trimming of
damaged areas.
* Added new option '-O, --reopen-on-error'.
* Added new options '-1, --log-rates', '-2, --log-reads'.
* Extended '-K, --skip-size' with maximum and disable values.
* Changed long name of option '-r' to '--retry-passes'.
* Changed short name of option '--generate-mode' to '-G'.
* Default value of option '-l, --logfile-size' increased to 10000.
* If interrupted, ddrescue terminates by raising the signal received.
* rescuebook.cc (copy_non_tried): Don't mark skipped blocks as
non-trimmed. Try them in additional passes (before trimming).
* rescuebook.cc: Limit the copying phase to 3 passes.
* rescuebook.cc: Alternate direction of passes during copying phase.
* rescuebook.cc: Smallest blocks are trimmed first.
* rescuebook.cc (split_errors): Read largest first if logfile full.
* Improved speed when using option '-m, --domain-logfile'.
* io.cc (show_status): Show the current total run time.
* rescuebook.cc: Show pass number and direction during copying.
* rescuebook.cc (show_status): Show block pos instead of current_pos.
* main.cc: Show "an unknown number of bytes" for unknown insize.
* Added option '-B, --binary-prefixes' to ddrescuelog.
* Added new option '-C, --complete-logfile' to ddrescuelog.
* Added new option '-P, --compare-as-domain' to ddrescuelog.
* Improved speed of logic operations in ddrescuelog.
* rescuebook.cc (do_rescue): Show warning when domain is smaller
than logfile.
* ddrescuelog.cc (do_show_status): Show logfile and domain extents
when domain is smaller than logfile.
* block.h: Class Block now forces the invariant by itself.
* Code reorganization. New class 'Logfile'.
* Added status message to rescue logfile.
* Many improvements to documentation.
* ddrescue.texinfo: Renamed to ddrescue.texi.
2013-07-09 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.17 released.
* Added new option '-l, --logfile-size'.
* Added new option '-w, --ignore-write-errors'.
* Option '--fill' has been renamed to '--fill-mode'.
* Option '--generate-logfile' has been renamed to '--generate-mode'.
* Added option '--sector-size' as a synonym of '--block-size'.
* Added option '--retries' as a synonym of '--max-retries'.
* Added option '--size' as a synonym of '--max-size'.
* rescuebook.cc: Trimming is now done from both edges of each
non-trimmed block. Largest blocks are trimmed first.
* rescuebook.cc: Largest blocks are now split first until
logfile reaches '--logfile-size' entries.
* logbook.cc (extend_sblock_vector, truncate_vector): Terminate
if truncation would discard finished blocks.
* rescuebook.cc: Mark failed blocks with 1 sector as bad-sector.
* logbook.cc (extend_sblock_vector): Remove last block of
logfile if it starts at insize and is not marked as finished.
* io.cc (show_status, update_rates): Detect a jump back in time
and adjust status.
* ddrescue.h (slow_read): Return false for the first 10 seconds.
* io.cc (show_status) Leave cursor after message so that ^C does
not overwrite it.
* main.cc: Don't require '--force' for generate mode.
* ddrescue.h (Logbook::logfile_exists): Don't return false if
logfile exists but is empty.
* ddrescue.texinfo: Added new chapter 'Using ddrescue safely'.
* Documented that 'direct disc access' only reads whole sectors.
* configure: Options now accept a separate argument.
* Makefile.in: Added new target 'install-bin'.
2012-06-11 Antonio Diaz Diaz <ant_diaz@teleline.es>
* Version 1.16 released.
* Added new option '-K, --skip-size'.
* Added new option '-T, --timeout'.
* Changed short name of option '--try-again' to '-A'.
* Maximum skip size is now limited to 1% of infile size or 1 GiB
(whichever is smaller), rounded to the next multiple of sector
size.
* Set current_pos to end of block when reading backwards.
* The option '-E, --max-error-rate' now checks the rate of
actually failed reads, not the growth of error size.
* The option '-v, --verbose' now increases verbosity if repeated.
* Changed quote characters in messages as advised by GNU Standards.
* configure: 'datadir' renamed to 'datarootdir'.
* New files rational.h, rational.cc.
2012-01-01 Antonio Diaz Diaz <ant_diaz@teleline.es>
* Version 1.15 released.
* Added new option '-a, --min-read-rate'.
* Added new option '-I, --verify-input-size'.
* Added new option '-x, --extend-outfile'.
* main.cc: Verify that infile, outfile and logfile are all
different.
* Non-tried blocks are now read aligned to cluster-size sectors.
* rescuebook.cc: Improved skip algorithm for the split pass.
* main.cc: Removed spurious warning about '-D' ignored in fill mode.
* ddrescue.texinfo: Improved description of algorithm.
* logbook.cc (change_chunk_status): Return an adjust value (-1, 0, 1)
to keep "errors" updated without calling count_errors every time.
* ddrescue.cc: Renamed to io.cc.
* Added 'ddrescuelog', a program for logfile manipulation.
2011-01-10 Antonio Diaz Diaz <ant_diaz@teleline.es>
* Version 1.14 released.
* Added new option '-R, --reverse'.
* Added new option '-E, --max-error-rate'.
* Extended syntax '--max-errors=+N' to specify new errors.
* Changed short name of option '--retrim' to '-M'.
* Removed spurious warning about 'preallocation not available'.
* Code reorganization. New class 'Genbook'.
2010-08-27 Antonio Diaz Diaz <ant_diaz@teleline.es>
* Version 1.13 released.
* Non-regular output files are no longer overwritten by default.
* Added new option '-f, --force'.
* Added new option '-p, --preallocate'.
* main.cc (write_logfile_header): Write command line to logfile.
* ddrescue.texinfo: Added info about logfile and recoverable formats.
* ddrescue.texinfo: Added a couple more warnings to the tutorial.
* testsuite: 'test1' renamed to 'test.txt'
* Revert to use 'long' instead of 'time_t' for time variables.
Ddrescue only needs counting seconds and 'time_t' causes
warnings on some systems.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update elfutils from 0.176 to 0.182
- Updated rootfile
- From version 0.178 debuginfod client/server capability was added.
Additional .configure options required to disable debuginfod
and libdebuginfod
- Changelog
2020-10-28 Mark Wielaard <mark@klomp.org>
* configure.ac: Set version to 0.182.
* NEWS: Add 0.182 section.
2020-10-28 Tom Tromey <tom@tromey.com>
* .gitignore: Add /tests/leb128.
2020-10-01 Frank Ch. Eigler <fche@redhat.com>
PR25461
* configure.ac: Add --enable-debuginfod-urls[=URLS] option.
2020-09-18 Mark Wielaard <mark@klomp.org>
* configure.ac: Check availability of libzstd and zstd.
2020-09-08 Mark Wielaard <mark@klomp.org>
* configure.ac: Set version to 0.181.
* NEWS: Add 0.181 section.
2020-08-20 Dmitry V. Levin <ldv@altlinux.org>
* configure.ac (--enable-libdebuginfod): AC_DEFINE ENABLE_LIBDEBUGINFOD.
2020-07-17 Mark Wielaard <mark@klomp.org>
* configure.ac: Set -DBAD_FTS=1 also for CXXFLAGS.
2020-06-19 Mark Wielaard <mark@klomp.org>
* Makefile.am (SUBDIRS): Always add debuginfod.
* configure.ac (debuginfod): Split off...
(libdebuginfod): ... this. Also add DUMME_DEBUGINFOD.
2020-06-15 Sergei Trofimovich <slyfox@gentoo.org>
* configure.ac: Use READELF in build-id check.
2020-06-11 Mark Wielaard <mark@klomp.org>
* configure.ac: Set version to 0.180.
* NEWS: Add 0.180 section.
* .gitignore: Update with new generated file.
2020-06-10 Mark Wielaard <mark@klomp.org>
* configure.ac (MODVERSION): Remove.
2020-03-30 Mark Wielaard <mark@klomp.org>
* configure.ac: Set version to 0.179.
* NEWS: Add 0.179 section.
2020-03-25 Mark Wielaard <mark@klomp.org>
* README: Update mailinglist subscription info.
* CONTRIBUTING: Likewise.
2020-02-03 Frank Ch. Eigler <fche@redhat.com>
* configure.ac: Tolerate CXX= for debuginfod configuration.
2019-12-11 Omar Sandoval <osandov@fb.com>
* configure.ac: Apply -Werror after user-defined CFLAGS in
-D_FORTIFY_SOURCE=2 check.
2019-12-06 Mark Wielaard <mark@klomp.org>
* configure.ac: Add ac_cv_buildid check.
2019-11-26 Mark Wielaard <mark@klomp.org>
* configure.ac: Set version to 0.178.
NEWS: Add 0.178 section.
2019-11-26 Mark Wielaard <mark@klomp.org>
* configure.ac: Add CXXFLAGS for gcov.
2019-10-28 Aaron Merey <amerey@redhat.com>
* debuginfod/: New directory for debuginfod code.
* Makefile.am (SUBDIRS): Recurse there.
* configure.ac (--enable-debuginfod): New flag & checks.
2019-08-25 Jonathon Anderson <jma14@rice.edu>
* configure.ac: Add new --enable-valgrind-annotations
* configure.ac: Add new --with-valgrind (headers only)
2019-07-05 Omar Sandoval <osandov@fb.com>
* configure.ac: Get rid of --enable-libebl-subdir.
* Makefile.am (SUBDIRS): Reorder backends and libcpu before libebl to
satisfy build dependencies.
2019-08-13 Mark Wielaard <mark@klomp.org>
* configure.ac: Set version to 0.177.
* NEWS: Mention elfclassify, readelf DW_AT_data_member_location
and DW_AT_discr_list attribute changes, dwarf.h DW_AT_GNU additions,
dwelf_elf_e_machine_string function, dwelf_elf_begin change and
C-SKY backend support.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update p7zip from 16.02 (Jul 2016) to 17.03 (Dec 2020)
- Version 16.02 was the last version by the previous dev team.
A fork was created in May 2020 with version 17.01
- Rootfile updated
- Changelog
Version 17.03
=============
- add zstd to zip
- add hash algorithm
- XXHASH32
- XXHASH64
- MD2
- MD4
- MD5
- sha384
- sha512
- add Lzfse to dmg
- add lz5 to 7z
- add lizard to 7z
- update lz4 to v1.9.3
- add brotli to 7z
- update cmake build
- fix xz crc64 error
- use system local to select OEM code
- add rpm install
- fix lzma2 and flzma22 call the same algorithm
- add 7zr build
- fix tar format link file compress and decompress
Version 17.02
=============
- p7zip 17.02 is more like 7zip 17.01(only 7za and 7z),The difference from 7zip 17.01
and older version p7zip is the following description
- Supports Fast lzma2 1.0.1 compression method
- Update Zstd method to 1.4.5
- Add zstd method parameters in 7z format
ZSTD parameters NEW name:
strategy -> strat
fast -> fast
long -> long
WindowLog -> wlog
HashLog -> hlog
ChainLog -> clog
SearchLog -> slog
MinMatch -> slen
TargetLen -> tlen
OverlapLog -> ovlog
LdmHashLog -> ldmhlog
LdmSearchLength -> ldmslen
LdmBucketSizeLog -> ldmblog
LdmHashRateLog -> ldmhevery
- Fix symlink files contained inside tar and squashfs as regular file
- Add lz4 and Zstd decompress method to squashfs
Version 17.01
=============
- Fix BUG CVE-2018-10115
- Fix BUG CVE-2018-5996
- Fix BUG CVE-2017-17969
- Fix BUG CVE-2016-9296
- The bug fixes in version 17.01 address the same CVE bugs as the
p7zip-16.02-consolidated_fixes-1.patch Therefore this patch is no longer needed
- The patches for CVE-2016-2334 & 2335 were for versions before 16.00 so are no longer needed
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
The changelog of lynis 3.0.3 is available at
https://github.com/CISOfy/lynis/releases/tag/3.0.3; all changes since
lynis 3.0.1 can be inspected at https://github.com/CISOfy/lynis/releases.
lynis 3.0.2 adds detection for IPFire, so we can hope to have those
"unknown operating system" messages omitted in future. :-)
Minor adjustments to LFS and rootfile were necessary to purge unused
CI/CD stuff as well as some markdown files (licence, code of conduct,
etc. pp.) from the extracted archive.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Release notes as per https://github.com/seccomp/libseccomp/releases/tag/v2.5.1:
Version 2.5.1 - November 20, 2020
Fix a bug where seccomp_load() could only be called once
Change the notification fd handling to only request a notification fd if
the filter has a _NOTIFY action
Add documentation about SCMP_ACT_NOTIFY to the seccomp_add_rule(3) manpage
Clarify the maintainers' GPG keys
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update qemu from 5.0.0 to 5.2.0
- Changelogs for 5.1.0 and 5.2.0 available at https://wiki.qemu.org/ChangeLog/
- rootfile updated
- patch no longer needed as fix built into source. patch was not utilised
for 5.0.0 version. Patch line was commented out in previous lfs
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update cups-filters from 1.27.4 to 1.28.7
- Changelog
CHANGES IN V1.28.7
- driverless: Removed the support quality check from Pull
request #235 as it takes significant time for each printer
being listed, making cups-driverd (`lpinfo -m`) timing out
when there are many printers (OpenPrinting CUPS issue #65).
- libcupsfilters: In the PPD generator give priority to Apple
Raster against PDF (Issue #331).
- libcupsfilters: Added NULL check when removing ".Borderless"
suffixes from page size names (Issue #314, Pull request
#328).
- libcupsfilters: In the cupsRasterParseIPPOptions() map the
color spaces the same way as in the PPD generator (Issue
#326, Pull request #327).
- libcupsfilters: Fixed addition of grayscale mode in
generated PPD files, to avoid duplicate entries
(OpenPrinting CUPS issue #59).
CHANGES IN V1.28.6
- libcupsfilters: In generated PPDs add a grayscale mode if
there are only color printing modes (from OpenPrinting
CUPS).
- libcupsfilters: In generated PPDs add an "OutputBin" option
also if it has only one choice (OpenPrinting CUPS pull
request #18).
- libcupsfilters: Generated PPDs could have an "Unknown"
default InputSlot (OpenPrinting CUPS issue #44).
- cups-browsed: Removed unneeded IPP attribute additions
preventing the created local queues from preserving a
location or description the user assigns to them (Issue
#323).
- cups-browsed: Removed all calls of the resolve_uri() function
of libcupsfilters, as these are not actually needed and in case
the supplied DNS-SD-based URI is not resolvable, the function
gets stuck for ~5 seconds.
- cups-browsed: Fixed several memory leaks, mainly from the
code to merge printer IPP attributes for clusters (Pull
request #322).
- cups-browsed: Silenced compiler warning.
- foomatic-rip: Fix infinite loop and input from file on raw
printing (Pull request #318).
- foomatic-rip: Remove temporary file created during pdf-to-ps
conversion (Pull request #313).
CHANGES IN V1.28.5
- cups-browsed: UUID from IPP response was used after its
pointer was freed by ippDelete() (Pull request #311).
CHANGES IN V1.28.4
- driverless: Avoid duplicate PPD list entries from the same
device via UUID
- driverless: Reduce ippfind calls by "driverless" and
"driverless-fax"called by CUPS. Let "driverless list" list
both print and fax PPDs and "driverless-fax list" do
nothing.
- driverless: Avoid duplicate listings in printer discovery,
by "driverless-fax" not listing any URI as "driverless"
lists them all already.
- driverless: Vastly improve performance by doing only one
ippfind call instead of two (IPP, IPPS) as ippfind accepts
more than one reg type on the command line.
- Sample PPDs: Corrected manufacturer name in
Fuji_Xerox-DocuPrint_CM305_df-PDF.ppd.
CHANGES IN V1.28.3
- libcupsfilters, cups-browsed: Fixed inconsistency between
resolvers for DNS-SD-based URIs, resolve_uri() and
ippfind_based_uri_converter(). Now both return a freeable
string.
- libcupsfilters: Fix uninitialized buffer and parsing ippfind
output in ippfind_based_uri_converter() function (Issue
#308, Pull request #309).
CHANGES IN V1.28.2
- driverless: Free allocated memory, use MAX_OUTPUT_LEN (Pull
request #304).
- driverless: Make the two ippfind tasks(for IPP
and IPPS) run in parallel (Pull request #302, #305, #306).
- braille: Support new liblouis tables not containing a
display name (Pull request #303)
- Build system: Let ./configure not error out when there is
more than one DejaVuSans.ttf test font candidate (Issue
#300).
- cups-browsed: Crash when a remote printer set as default
gets removed, due to missing variable in printf() call
(Issue #299).
- libcupsfilters: Removed all signal handling and global
variables from get_printer_attributes() and
ippfind_based_uri_converter(). This is overkill for these
quick operations and causes problems when shutting down
cups-browsed (Issue #298).
CHANGES IN V1.28.1
- COPYING: Fixed several typos
- libcupsfilters: Fixed typo in log message of
get_printer_attributes functions.
- cups-browsed: Fixed typos in configuration file and man page
- libcupsfilters: Let the PPD generator not suffix page size
names with ".Borderless" if all page sizes would get this
suffix, for example for printers which generally print
borderless.
- libcupsfilters: Added "faxPrefix" option for generated IPP
Fax Out PPDs, so that this option also appears in print
dialogs.
- driverless: List addresses for local services correctly when
using "--std-ipp-uris" (with "localhost" hostname).
- driverless: Make calls of the ippfind utility somewhat faster,
setting the timeout of ippfind to automatic.
- libcupsfilters: Resolve DNS-SD-based URIs for local services
correctly (using hostname "localhost").
- libcupsfilters: In get_printer_attributes() functions do not
try to convert URIs which are not DNS-SD-based (Issue #294).
- libcupsfilters: In get_printer_attributes() functions also
support URIs with "dnssd://..." scheme.
- libcupsfilters: Moved signal handling back into main
function of the get_printer_attributes() variants, it got
moved out accidentally.
- driverless: For generating a PPD, independent whether via
"driverless URI" or "driverless cat URI", always allow CUPS
driver URIs (prefixed with "driverless: " or
"driverless-fax:") and pure IPP URIs.
- driverless: Accept clean IPP URIs also for 'driverless cat
...' (Issue #295, Pull request #296).
- driverless-fax: Do not use fixed path for call of driverless
itself (Pull request #293).
CHANGES IN V1.28.0
- driverless, driverless-fax, libcupsfilters: Added IPP Fax
Out support. Now printer setup tools list an additional fax
"driver". A fax queue is created by selecting this
driver. Jobs have to be sent with "-o phone=12345" to supply
the destination phone number (Pull request #280).
- libfontembed: Silenced warning with gcc 10.x (Pull request
#287).
- cups-browsed: Added ./configure options
--enable-saving-created-queues and
--with-remote-cups-local-queue-naming (Pull request: #253,
#285).
- cups-browsed: Fixed several memory leaks, mainly from the
code to merge printer IPP attributes for clusters (Pull
request #281, #283).
- driverless: Added "--std-ipp-uris" command line option to
show listed URIs in standard hostname-based form (not the
CUPS DNS-SD-service-name-based form. Only for manual call of
the utility, for debugging purposes (Pull request #277).
- libfontembed: Removed assert() calls which cause crashes
when unsupported emoji fonts are installed (Issue #254, Pull
request #276).
- driverless: Added support for IPPS (use "ipps://..." URIs if
possible, Issue #251, Pull request #270, #273).
- gstoraster, gstopdf: When converting PostScript to PDF use
the "pdfwrite" output device with "-dPDFSETTINGS=/default"
instead of with "-dPDFSETTINGS=/printer". This reproduces
bitmaps in the PostScript file with their original image
quality (Issue #272).
- cups-browsed: Limit log file size and add backup file for
previous log entries. Introduced the configuration option
DebugLogFileSize in cups-browsed.conf to set the actual
limit in kilobytes or 0 to get the old behavior of an
unlimited size for the log file (Issue #260, Pull request
#267).
- gstoraster, gstopdf: Do not apply margins when output format
is PDF, as then we convert an incoming PostScript file to
PDF (pre-pdftopdf) and do not prepare the pages for the
printer (post-pdftopdf, Issue #250).
- cups-browsed: Do not write any log messages directly to
stderr, there were some concerning timeouts on queue
creation (Issue #260).
- Build system: Fix cross-compilation without DejaVu test font
in configure.ac (Issue #262, Pull request #263).
- libcupsfilters: Respect the fact that PPD keywords
are case-sensitive when adding "*cupsManualCopies: True" in
PPD file (Issue #242).
- libcupsfilters: Older versions of libcups (< 2.3.1)
had the enum name for fold-accordion finishings mistyped.
Added a workaround.
- cups-browsed: Remove left-over local queues from the
previous session more quickly when CUPS legacy browsing is
turned on.
- cups-browsed: Left-over local queues from the previous
session for which the corresponding remote printer did not
appear again did not get removed as they were considered
externally overwritten.
- gstoraster, gstopdf: Add option "-dDoNumCopies" to
Ghostscript command line if we are outputting PDF (called
via gstopdf wrapper) and the number of copies supplied to
CUPS is 1 (4th command line argument). In this case we
convert incoming PostScript to PDF and need to respect
embedded PostScript commands to implement the number of
copies (Issue #255, CUPS Issue #5796, OpenSUSE bug
#1173345).
- imagetoraster: Potential null dereference fix (when no valid
PPD is supplied, Pull request #256).
- cups-browsed: Call cupsGetNamedDest() only if
"OnlyUnsupportedByCUPS No"
- Sample PPDs: Corrected ColorModel default for Generic PWG
Raster PPD to Color (Pull request #247).
- cups-browsed: Mark the temp queue as cups-browsed-generated
during setting printer-is-shared (Pull request #246).
- cups-browsed: Remove mentions of README and AUTHORS files in
the man page (Pull request #244).
- pclmtoraster: Added new filter to extract Raster data from
raster-only PDF files, here for the special case of PCLm
files (Pull request #243, #257).
- Sample PPDs: In Generic-PDF_Printer-PDF.ppd add option to
switch between color and grayscale printing (Pull request
#237).
CHANGES IN V1.27.5
- cups-browsed: Do not remove the created local queues on
shutdown, to avoid their re-creation on restart, so that
desktops get no cluttered with notifications of new queues
being created. One can return to the old behavior via
"KeepGeneratedQueuesOnShutdown No" in cups-browsed.conf
(Ubuntu bug #1869981, #1878241).
- cups-browsed: Do not accept DNS-SD broadcasts of IPPS type
of "remote" CUPS queues of another CUPS instance on the
local machine. This way we get a local queue pointing to
such a printer only in unencrypted version (IPP). For some
reason printing from one CUPS server to another on the same
machine works only unencrypted.
- foomatic-rip: Map two-sided-short-edge to DuplexTumble (Pull
request #236)
- Build system: In configure.ac use AS_IF instead of
AC_CHECK_FILE for font check (Issue #239, Pull request #240)
- cups-browsed: Cleaned up code for determining to which CUPS
server (host/port/domain socket) to connect, so that
connection via DomainSocket cups-browsed.conf directive,
CUPS_SERVER and IPP_PORT environment variables and all
defaults and methods of libcups, including CUPS' client.conf
work.
- gstoraster, rastertopdf: Do not pass NULL to fprintf() (Pull
request #230).
- libcupsfilters: Silence compiler warning (Pull request #229).
- rootfile updated
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update dbus from 1.11.12 to 1.12.20 (latest in release line
1.13.x is also available but this is the development line
and not recommended for production use
- Changelog between these two versions is very long (750 lines long) and
can be found in the NEWS file in the source tarball.
- rootfile updated
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update minicom from 2.7.1 to 2.8
- Changelog for version 2.8
New timestamp mode: Delta to previous line.
Add HPA ESC sequence
Add alternative window support (ti/te)
Fix file name of non-global configuration settings.
Update translations: Indonesian, French, Swedish, Spanish, German, Brazilian Portuguese, Vietnamese, Polish, Danish, Norwegian, Serbian
New translation: Serbian, Simplified chinese
Fix F10 macro key used in current setups
Add F11 and F12 for macro use
Fixed DTR for recent systems
Add support for RS485.
Add --capturefile-buffer-mode option
Bug fixes
- Updated rootfile
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
It is complicated to set the password in the C helper binary.
Therefore it is being set by a helper script.
This is still not an optimal solution since the password might be
exposed to the shell environment, but has the advantage that shell
command injection is no longer possible.
Fixes: #12562
Reported-by: Albert Schwarzkopf <ipfire@quitesimple.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Since tshark uses with version 3.4.0 an always enabled asynchronous DNS
resolution c-ares is a needed dependency.
- Since curl can also use c-ares --> https://c-ares.haxx.se/ it has been
placed in make.sh before curl even no compiletime options has been set
to enable this. c-ares has also been placed in packages and not in common
which would be needed if it should be used for curl too.
Signed-off-by: ummeegge <erik.kapfer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Bacula install used the bacula initscript for starting and stopping bacula.
This works fine but results in no pid or memory input in the addons table
under services.
Using the IPFire initscript also successfully starts and stops bacula with
no problems but also provides the pid and memory information in the services
addons table.
- rootfiles adjusted to remove the reference to bacula-ctl-fd
- lfs/bacula adjusted to remove the init.d/bacula link generation
remove the "rm -f /root/.rnd" command. This file is not present
and I have not seen this command in any other lfs file that I
have looked at.
- new bacula initscript created
Signed-off-by: Adolf Belka <ahb.ipfire@gmail.com>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Added a backup/includes file for apcupsd to backup the
/etc/apcupsd/ directory where all the configuration files
are stored. Currently there is no backup available to
save the state of any changes carried out to the configuration
or action files.
Signed-off-by: Adolf Belka <ahb.ipfire@gmail.com>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Full changelog obtained from: https://cisofy.com/changelog/lynis/#301
- Detection of Alpine Linux
- Detection of CloudLinux
- Detection of Kali Linux
- Detection of Linux Mint
- Detection of macOS Big Sur (11.0)
- Detection of Pop!_OS
- Detection of PHP 7.4
- Malware detection tool: Microsoft Defender ATP
- New flag: --slow-warning to allow tests more time before showing a
warning
- Test TIME-3185 to check systemd-timesyncd synchronized time
- rsh host file permissions
- AUTH-9229 - Added option for LOCKED accounts and bugfix for older bash
versions
- BOOT-5122 - Presence check for grub.d added
- CRYP-7902 - Added support for certificates in DER format
- CRYP-7931 - Added data to report
- CRYP-7931 - Redirect errors (e.g. when swap is not encrypted)
- FILE-6430 - Don't grep nonexistant modprobe.d files
- FIRE-4535 - Set initial firewall state
- INSE-8312 - Corrected text on screen
- KRNL-5728 - Handle zipped kernel configuration correctly
- KRNL-5830 - Improved version detection for non-symlinked kernel
- MALW-3280 - Extended detection of BitDefender
- TIME-3104 - Find more time synchronization commands
- TIME-3182 - Corrected detection of time peers
- Fix: hostid generation routine would sometimes show too short IDs
- Fix: language detection
- Generic improvements for macOS
- German translation updated
- End-of-life database updated
- Several minor code enhancements
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This package has not been maintained well and is thereof outdated. At
the time of writing, we neither
(a) have a maintainer for this nor
(b) believe it is wise to run a full-featured content scanner on a
firewall for security purposes. (We can make do with Postfix, as it
is known for being a very robust MTA and providess less attack
surface than something actually inspecting transferred messages.)
Thereof, this patch drops the SpamAssassin add-on. In case it is desired
in future versions of IPFire, it can be easily reverted, restoring the
functionality and behaviour before.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This package has not been maintained well and is thereof outdated. At
the time of writing, we neither
(a) have a maintainer for this nor
(b) believe it is wise to run a full-featured content scanner on a
firewall for security purposes. (We can make do with Postfix, as it
is known for being a very robust MTA and providess less attack
surface than something actually inspecting transferred messages.)
Thereof, this patch drops the Amavis add-on. In case it is desired in
future versions of IPFire, it can be easily reverted, restoring the
functionality and behaviour before.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
