ipfire has changed theme css style and wireguard.cgi relies
on the new css style, replace the bpfire css style with ipfire style
breaks other cgi style, so make the change minium that is only
relevant to wireguard.cgi VPN peers status.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
wireguard.cgi calls errorbox and opensection/closesection,
but they are missing from header.pl. ipfire had functons.pl
removed and moved subroutines to header.pl and added errorbox
in header.pl. to keep the change minimum so not affect other
features, add errorbox and opensection/closesection in functions.pl
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
commit c29a07b2ee505811a6cd78ca643bf816beb77375
Author: Michael Tremer <michael.tremer@ipfire.org>
Date: Mon May 26 11:38:57 2025 +0200
index.cgi: Show WireGuard status using the function library
The settings file is also loaded all the time and we don't need to load
it again.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
commit 50b4c402226cda390832d3124a2a46187cc635c3
Author: Stephen Cuka <stephen@firemypi.org>
Date: Thu Feb 27 16:34:16 2025 -0700
fwhosts.cgi: Add button spacing on 'Firewall/Firewall Groups' page.
Add spacing between showmenu() buttons on Firewall/Firewall Groups page to improve the look of the page.
No changes to the functions of the page.
Signed-off-by: Stephen Cuka <stephen@firemypi.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
commit 1de96a83d6d6cec5d4d3eda1792aa80bfbd8fafe
Author: Michael Tremer <michael.tremer@ipfire.org>
Date: Wed Apr 23 12:35:52 2025 +0200
firewall: Add support for WireGuard peers to groups
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
commit 468e9831d5c7b99a2dc20b66d881f43ecb0a424b
Author: Michael Tremer <michael.tremer@ipfire.org>
Date: Tue Apr 22 17:41:12 2025 +0200
firewall.cgi: Add dropdown to add WireGuard peers to a firewall rule
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
commit 06dbc836a47160d51ab10f8b9d4ca356beaa7cdb
Author: Michael Tremer <michael.tremer@ipfire.org>
Date: Tue Apr 16 18:06:47 2024 +0200
wireguard.cgi: Add a basic CGI to configure the global settings
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
should not send bpfire user profile to ipfire
to confuse ipfire community, bpfire could setup
such profile collection in the future.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
save IP/LB/FW configuration from loxilb UI so
when loxilb restart or bpfire reboot, the configuration
can be restored.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
add dummy ip 192.0.2.1 in virutal_ipaddress from (TEST-NET-1)
according to https://www.rfc-editor.org/rfc/rfc5737#section-3
for keepalived HA state tracking, the Master will always
have the dummy ip assigned to green0.
add refresh button for HA state refresh
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
in HA scenario, the shared/floating VIP
is not configured on the red0 interface
when setup LoxiLB lb from the UI in standby
BPFire, some VIPs are missing since these
VIPs are only configured in the active BPFire.
get VIPs from /var/ipfire/loxilb/ipconfigfile
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
when run loxicmd save -a -c /var/ipfire/loxilb/
ipconfig directory will be created, which conflicts
with loxilb UI that also save virtual ip to
/var/ipfire/loxilb/ipconfig, so rename ipconfig to
ipconfigfile.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
remove @nosaved from /var/ipfire/loxilb/settings
as it could interfere with running state of
loxilb
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
remove @nosaved item from form submission
before writehash to each setting file because
it could interfere with each other.
for example, when change keepalived configuration
for green or red interface from the UI,
without removing @nosaved which has 'ENABLE_HA'
before writehash, 'ENABLE_HA=off' would be saved
in '/var/ipfire/keepalived/settings', this would
trigger the UI to show keepalived being "STOPPED"
or it could actually stopoped keepalived.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
In BPFire HA deployment, a floating/shared router IP
is required for backend/endpoint server. by default
BPFire uses the primary IP on green0 when running
setup script. Now the floating/shared router IP can
be added to green0 interface as secondary IP through
loxilb UI, keepalived UI can configure the secondary
IP as virtual ipaddress, when HA failover happens,
keepalived will move the virtual ipaddress to new active
BPFire.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
BPFire red0 does not support multicast, need to
have unicast peer configured, then the virtual
ipaddress can be added to red0 interface.
the UI requires /var/ipfire/keepalived/runsettings
/var/ipfire/keepalived/settings to be created, so
add them lfs/configroot
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
since we added loxilb ip management to add ip on
red0 interface, we can select the virtual ip from
red0 interface.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
learned from ChatGPT to print dynamic options.
add semi column ';' right after heredoc like:
print <<END;
...
...
END
following result in error
print <<END
...
...
END; #<<<< ERROR
following is correct
print <<END
...
...
END
;
so better use the first format
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
run command below when update language menu
perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
