grub-btrfs try to reconfigure grub in the buildsystem and print always the bugtracker url on every error even when its not a bug
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
because if this file exist the cleanap script will remove the older version after downgrade
and the system still use the malewared version.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
This gives us a lot of benefits:
* Speed up the extraction process
* More supported archive types due the power of libarchive
* Support of passphrase protected archives
It also fixes a problem with non extracted files next to a zero sized
file inside an archive.
Fixes#13632.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
As very simple XS based perl binding for libarchive
to get header data and extract files.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is only a build dependency for perl-Arhive-Peek-Libarchive and
will not be installed on a system
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is only a build dependency for perl-Config-AutoConf and
will not be installed on a system
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is a precautionary step to avoid that we have any issues to face
because of a downgrade as new symbols have been added to liblzma 5.6.0.
Furthermore, this should avoid shipping any traces of any other
potential malware in XZ that has been added in 5.6.0 or after.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- xz version 5.6.0 and 5.6.1 discovered to have been backdoored by what looks to have
been one of the xz devs.
- IPFire looks not to be affected by the problem as we don't patch openssh to be linked
with liblzma
- However due to question marks about what else might be in these 5.6.x versions it is
better to revert back to a version that did not have the build-to-host.m4 file with the
code that modifies the build if it meets certain criteria.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
this file should created by grub-install at installation.
Also it is not present on aarch64 builds of grub.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- This v2 patch corrects that the previous script was looking for =on. If a user had
modified the preferences to change it to =off then the script would have resulted in
both =on and =off versions being in the settings file.
- This patch ensures that those people who updated to CU184 before the CU184-update.sh
patch fix to add the logging entries was added will get their optionsfw settings file
correctly updated with CU185
- This only adds the LOGDROPHOSTILEIN & LOGDROPHOSTILEOUT entries if they do not already
exist in the optionsfw settings file.
- This change also does the check for LOGDROPHOSTILEIN and LOGDROPHOSTILEOUT as two
separate checks and then runs the firewall update command
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This kind of grub addon will extend the grub boot menu by a additional
submenu where a BTRFS snapshot can be selected to directly use as root
volume and boot into it.
The grub-btrfsd daemon is using inotify(tools) to watch the snapshot directory for
new or deleted snapshots and calls grub-mkconfig to adjust the snapshot grub submenu
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- From shadow-15.0.0 all references to cracklib were removed from shadow. Apparently
some functions were no longer accessible and the shadow team decided to remove cracklib
references completely. This was not mentioned in the changelkog for 15.0.0
- This resulkts in gettinbg the message configuration error - unknown item
'CRACKKLIB_DICTPATH' ( notify administrator ) when logging in to the console.
- The login to the console occurs successfully so the message is only a warning that
cracklib is no longer used.
- IPfire does not use cracklkib anyway so this patch removes the section referring to
cracklib from the login.defs configuration file.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- This patch ensures that those people who updated to CU184 before the CU184-update.sh
patch fix to add the logging entries was added will get their optionsfw settings file
correctly updated with CU185
- This only adds the LOGDROPHOSTILEIN & LOGDROPHOSTILEOUT entries if they do noit already
exist in the optionsfw settings file.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
At least these informations are required to display something usefull
on the webgui, even if a provider has been dropped.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
the only file in the package is now the initskript to configre powersave mode using cpupower
which is shipped with the kernel.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
- Update from version 2.5.0 to commit e1266c7
- Update of rootfile
- When ppp-2.5.0 was released it had a bug bin it that the lock and run directories
had non standard defaults but also that if the directory did not exist ppp just
ignored it and continued to start but would then have error messages in the logs about
not being able to cretae the lock file
- This issue was raised in the ppp github issues and a set of patches merged into ppp.
- The plan was written in Nov 2023 that this would be released as 2.5.1, however nearly
three months later there is no sight of 2.5.1 being released and people continue to
flag up the lock directory issues and have to apply a workaround to create the directory
in local.rc
- This patch has taken the zip source tarball of master at the commit e1266c7. The zip
tarball was then extracted and then tar'd back up as a tar.gz file with the version set
at e1266c7 rather than master. I could not find any other way to get a source tarball\
created at a certain commit stage.
- The patch ppp-2.5.0-2-everywhere-O_CLOEXEC-harder.patch had to be updated due to some
changes in the source files.
- The patch ppp-2.5.0-7-add-configure-check-to-see-if-we-have-struct-sockaddr_ll.patch
was removed as the changes are now built into the source tarball.
- This will need to be tested thoroughly by people with ppp to confirm that the lock
directory is created if it doesn't exist on the system. I can't test that as I have
no access to a ppp connection system.
- For a view of the changelog between 2.5.0 and e1266c7 the github commits list needs to
be reviewed. https://github.com/ppp-project/ppp/commits/master/?before=e1266c76d1ad39f98f11676e34f180f78c5a510c+35
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- My drop hostile patch set updated the WUI entries to include in and out logging options
but the values need to be added to the optionsfw entries for existing systems being
upgraded.
- After the existing CU184 update the LOGDROPHOSTILEIN and LOGDROPHO)STILEOUT entries
are not in the settings file which trewats them as being set to off, even though they
are enabled in the WUI update.
- This patch adds the LOGDROPHOSTILEIN and LOGDROPHOSTILEOUT entries into the settings
file and then runs the firewallctrl command to apply to the firewall.
- Ran a CU184 update on a CU183 vm system and then ran the comands added into the update.sh
script and then did a reboot. Entries include and DROP_HOSTILE entries start to be
logged again.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 2.6.1 to 2.6.2
- Update of rootfile
- Changelog
2.6.2
Security fixes:
#839#842 CVE-2024-28757 -- Prevent billion laughs attacks with
isolated use of external parsers. Please see the commit
message of commit 1d50b80cf31de87750103656f6eb693746854aa8
for details.
Bug fixes:
#839#841 Reject direct parameter entity recursion
and avoid the related undefined behavior
Other changes:
#847 Autotools: Fix build for DOCBOOK_TO_MAN containing spaces
#837 Add missing #821 and #824 to 2.6.1 change log
#838#843 Version info bumped from 10:1:9 (libexpat*.so.1.9.1)
to 10:2:9 (libexpat*.so.1.9.2); see https://verbump.de/
for what these numbers do
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 5.6.0 to 5.6.1
- Update of rootfile
- Changelog
5.6.1
* liblzma: Fixed two bugs relating to GNU indirect function (IFUNC)
with GCC. The more serious bug caused a program linked with
liblzma to crash on start up if the flag -fprofile-generate was
used to build liblzma. The second bug caused liblzma to falsely
report an invalid write to Valgrind when loading liblzma.
* xz: Changed the messages for thread reduction due to memory
constraints to only appear under the highest verbosity level.
* Build:
- Fixed a build issue when the header file <linux/landlock.h>
was present on the system but the Landlock system calls were
not defined in <sys/syscall.h>.
- The CMake build now warns and disables NLS if both gettext
tools and pre-created .gmo files are missing. Previously,
this caused the CMake build to fail.
* Minor improvements to man pages.
* Minor improvements to tests.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
