This reverts commit bb773a05d5.
drivers/video/logo/logo_linux_clut224.ppm: Binary PNM is not supported
Use pnmnoraw(1) to convert it to ASCII PNM
make[6]: *** [drivers/video/logo/Makefile:31: drivers/video/logo/logo_linux_clut224.c] Error 1
make[5]: *** [scripts/Makefile.build:485: drivers/video/logo] Error 2
make[4]: *** [scripts/Makefile.build:485: drivers/video] Error 2
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
whenever compile kernel due to kernel change
lunatik needs to be recompiled too since
lunatik depends on kernel
change filter example Makefile to depend on
current kernel build version
diff --git a/examples/filter/Makefile b/examples/filter/Makefile
index f7eb0f6d..e30566a2 100644
--- a/examples/filter/Makefile
+++ b/examples/filter/Makefile
@@ -1,10 +1,12 @@
# SPDX-FileCopyrightText: (c) 2023-2024 Ring Zero Desenvolvimento de Software LTDA
# SPDX-License-Identifier: MIT OR GPL-2.0-only
+VMLINUX_BTF_PATH = /lib/modules/${shell uname -r}/build
+
all: vmlinux https.o
vmlinux:
- bpftool btf dump file /sys/kernel/btf/vmlinux format c > vmlinux.h
+ bpftool btf dump file $(VMLINUX_BTF_PATH)/vmlinux format c > vmlinux.h
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
upgrade kernel to recent stable release 6.10.11
1, scripts/kconfig/merge_config.sh does not work for 6.10.11
2, vmlinux BTF binary name changed in 6.10.11
3, remove rtl8812au for now since it has compiling error
4, remove 5.15 nfqueue patch since it does not apply cleanly
also see [0]
[0]: https://github.com/vincentmli/BPFire/issues/41
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
BTF mismatch is not an issue since
we addressed lunatik kernel module
BTF mismatch issue using the same
chroot binary vmlinux BTF.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
xdp-loader to load https.o result in error below:
libbpf: loading kernel BTF '/sys/kernel/btf/vmlinux': 0
libbpf: extern (func ksym) 'bpf_luaxdp_run': not found in kernel or module BTFs
libbpf: failed to load object '/usr/lib/bpf/https.o'
libxdp: Failed to load program filter_https: Invalid argument
Couldn't attach XDP program on iface 'green0': Invalid argument(-22)
xdp-tools/xdp-loader is built statically with libbpf 1.2
should not be xdp-loader libbpf issue
still try to upgrade bpfire libbpf to 1.3.0 for testing
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
kernel requires module to be signed, disable force
signing for now.
insmod: ERROR: could not insert module /lib/modules/6.6.15-ipfire/lunatik/lunatik.ko: Key was rejected by service
set CONFIG_MODULE_SIG_FORCE=n
failed to validate module [lunatik] BTF: -22
set CONFIG_MODULE_ALLOW_BTF_MISMATCH=y
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
allow syscall tracing with eBPF like
bcc libbpf-tools opensnoop to trouble
shoot open syscall for UI user nobody
unable to run loxicmd save -a -c /var/ipfire/loxilib/
see https://github.com/vincentmli/BPFire/issues/30
mount -t debugfs none /sys/kernel/debug/
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
when mouse select, vim automatically turns into
visual mode, this is not convienent when copy
and paste in vim with mouse select. create this
setting for root user.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
when loxilb is enabled and started, enable the
firewall SNAT for green network so green network
could have initiate outgoing traffic like internet
access.
we can achieve this by restoring firewall SNAT setting
from default /var/ipfire/loxilb/FWconfig.txt when loxilb
start up with --config-path=/var/ipfire/loxilb thanks
to the enhancement addressed in issue:
https://github.com/loxilb-io/loxilb/issues/706
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
When loxilb and keepalived are enabled, after BPFire
rebooted, loxilb and keepalived failed to start and
shows as "STOPPED" from UI, this is not expected since
we want to loxilb and keepalived to continue to be enabled
after reboot based on the enabled state of loxilb and
keepalived before reboot.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
BPFire red0 does not support multicast, need to
have unicast peer configured, then the virtual
ipaddress can be added to red0 interface.
the UI requires /var/ipfire/keepalived/runsettings
/var/ipfire/keepalived/settings to be created, so
add them lfs/configroot
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
change keepalived default config to
/var/ipfire/keepalived/keepalived.conf so keepalived WebUI
could read/write the configuration file. also add
/var/ipfire/keepalived directory
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
keepalived: create /var/ipfire/keepalived
since we added loxilb ip management to add ip on
red0 interface, we can select the virtual ip from
red0 interface.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Re-arrange the menu to have BPF centric
main menu, this also easy the developing
of loxilb load balancer GUI since loxilb
will have multiple functions like enable
loxilb, create loxilb lb, create loxilb ip
...etc, so each loxilb function has their
own CGI UI.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
run command below when update language menu
perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Avoid downloading golang dependency packages
during build time due to issue [0], run
go mod vendor so loxicmd source include vendor
directory to include golang dependency packages
[0]: https://github.com/vincentmli/BPFire/issues/18
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
We need to disable BPF trace capability and disallow
unprivileged BPF so
This reverts commit d0bd3cc033.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
XDP dns rate limit program has static tail call
which requires revert xdp-tool commit:
(039bdea "xdp-loader: Only load the BPF program we need from object files")
XDP dns rate limit program also uses bpf_printk helper which is not
supported on FireBeeOS since kernel CONFIG_BPF_EVENTS which allows user
to do kprobe, uprobe, tracepoint is not enabled, so bpf_printk helper is
not available, so removed bpf_printk
see discussion in [0] xdp-loader load xdp program with bpf tail call result in Bad file descriptor(-9)
[0] https://github.com/xdp-project/xdp-tools/issues/377
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
This reverts commit 0864b3a5ba.
User might be concerned firewall admin user capture SSL clear
text, so remove ecapture.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
This reverts commit 7773f82726.
After ISO installation in real hardware and reboot,
the boot process appears to be "stucking" in
"dracut: Switching root".
see https://github.com/vincentmli/FireBeeOS/issues/1
revert the commit resolves the issue, I suspect maybe
the output after "dractu: Switching root" is directed
to serial console? anyway revert this change temporarily.
flash image build still need to have serial console access
for better user experience when trying flash image in KVM/Libvirt
virtual environment.
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
add ddosctrl to start/stop/status XDP
program from ddos.cgi safely.
permission of ddosctrl
chown root.nobody /usr/local/bin/ddosctrl
chmod u+s /usr/local/bin/ddosctrl
result:
-rwsr-x--- 1 root nobody 14672 Mar 19 09:58 /usr/local/bin/ddosctrl
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
