- Update from 9.11.32 to 9.16.22
- 9.11 is an ESV (Extended Support Version) that will go EOL in December 2021
9.16 is the replacement ESV whose EOL is not yet defined but will be at least 4 years
so should be supported until at least March 2024 as the 9.16 branch was started in 2020
- Update rootfile
- libuv is now required both to build the bind libraries and for the running of the
utilities.
- Changelog is difficult to define here as this is a change of branch from 9.11 to 9.16
both of which have been running in parallel. However all the changes from the start of
9.16.0 can be found in the CHANGES file in the source tarball.
- nslookup, host and dig utilities tested out by installing this on a vm testbed. All
these utilities worked as the previous version
nsupdate was not able to be tested other than confirming that running nsupdate
opened an interactive session. This utility would be good to be tested by someone
familiar with how to run it.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.11.31/RELEASE-NOTES-bind-9.11.32.html
"Notes for BIND 9.11.32
Feature Changes
DNSSEC responses containing NSEC3 records with iteration counts
greater than 150 are now treated as insecure. [GL #2445]
The maximum supported number of NSEC3 iterations that can be
configured for a zone has been reduced to 150. [GL #2642]
The implementation of the ZONEMD RR type has been updated to match
RFC 8976. [GL #2658]
Notes for BIND 9.11.31
Security Fixes
A malformed incoming IXFR transfer could trigger an assertion
failure in named, causing it to quit abnormally. (CVE-2021-25214)
ISC would like to thank Greg Kuechle of SaskTel for bringing this
vulnerability to our attention. [GL #2467]
named crashed when a DNAME record placed in the ANSWER section
during DNAME chasing turned out to be the final answer to a client
query. (CVE-2021-25215)
ISC would like to thank Siva Kakarla for bringing this vulnerability
to our attention. [GL #2540]
When a server's configuration set the tkey-gssapi-keytab
or tkey-gssapi-credential option, a specially crafted GSS-TSIG query
could cause a buffer overflow in the ISC implementation of SPNEGO
(a protocol enabling negotiation of the security mechanism used for
GSSAPI authentication). This flaw could be exploited to crash named
binaries compiled for 64-bit platforms, and could enable remote code
execution when named was compiled for 32-bit platforms.
(CVE-2021-25216)
This vulnerability was reported to us as ZDI-CAN-13347 by Trend
Micro Zero Day Initiative. [GL #2604]
Feature Changes
The ISC implementation of SPNEGO was removed from BIND 9 source
code. Instead, BIND 9 now always uses the SPNEGO implementation
provided by the system GSSAPI library when it is built with GSSAPI
support. All major contemporary Kerberos/GSSAPI libraries contain
an implementation of the SPNEGO mechanism. [GL #2607]
Notes for BIND 9.11.30
The BIND 9.11.30 release was withdrawn after a backporting bug was
discovered during pre-release testing. ISC would like to acknowledge the
assistance of Natan Segal of Bluecat Networks.2"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.11.28/RELEASE-NOTES-bind-9.11.28.html
"Notes for BIND 9.11.28
Security Fixes
When tkey-gssapi-keytab or tkey-gssapi-credential was configured,
a specially crafted GSS-TSIG query could cause a buffer overflow in the
ISC implementation of SPNEGO (a protocol enabling negotiation of the
security mechanism to use for GSSAPI authentication). This flaw could
be exploited to crash named. Theoretically, it also enabled remote code
execution, but achieving the latter is very difficult in real-world
conditions. (CVE-2020-8625)
This vulnerability was responsibly reported to us as ZDI-CAN-12302
by Trend Micro Zero Day Initiative. [GL #2354]"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.11.21/RELEASE-NOTES-bind-9.11.21.html
"Bug Fixes
named could crash when cleaning dead nodes in lib/dns/rbtdb.c that
were being reused. [GL #1968]
Properly handle missing kyua command so that make check does not
fail unexpectedly when CMocka is installed, but Kyua is not. [GL
#1950]
The validator could fail to accept a properly signed RRset if an
unsupported algorithm appeared earlier in the DNSKEY RRset than
a supported algorithm. It could also stop if it detected a malformed
public key. [GL #1689]"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.11.20/RELEASE-NOTES-bind-9.11.20.html
"Security Fixes
It was possible to trigger an INSIST failure when a zone with
an interior wildcard label was queried in a certain pattern. This
was disclosed in CVE-2020-8619. [GL #1111] [GL #1718]
New Features
dig and other tools can now print the Extended DNS Error (EDE)
option when it appears in a request or a response. [GL #1835]
Bug Fixes
When fully updating the NSEC3 chain for a large zone via IXFR,
a temporary loss of performance could be experienced on the
secondary server when answering queries for nonexistent data that
required DNSSEC proof of non-existence (in other words, queries that
required the server to find and to return NSEC3 data). The
unnecessary processing step that was causing this delay has now been
removed. [GL #1834]
A data race in lib/dns/resolver.c:log_formerr() that could lead
to an assertion failure was fixed. [GL #1808]
Previously, provide-ixfr no; failed to return up-to-date responses
when the serial number was greater than or equal to the current
serial number. [GL #1714]
named-checkconf -p could include spurious text in server-addresses
statements due to an uninitialized DSCP value. This has been fixed.
[GL #1812]
The ARM has been updated to indicate that the TSIG session key is
generated when named starts, regardless of whether it is needed. [GL
#1842]"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.11.19/RELEASE-NOTES-bind-9.11.19.html
"Security Fixes
To prevent exhaustion of server resources by a maliciously
configured domain, the number of recursive queries that can be
triggered by a request before aborting recursion has been further
limited. Root and top-level domain servers are no longer exempt from
the max-recursion-queries limit. Fetches for missing name server
address records are limited to 4 for any domain. This issue was
disclosed in CVE-2020-8616. [GL #1388]
Replaying a TSIG BADTIME response as a request could trigger
an assertion failure. This was disclosed in CVE-2020-8617. [GL
#1703]
Feature Changes
Message IDs in inbound AXFR transfers are now checked for
consistency. Log messages are emitted for streams with inconsistent
message IDs. [GL #1674]
Bug Fixes
When running on a system with support for Linux capabilities, named
drops root privileges very soon after system startup. This was
causing a spurious log message, "unable to set effective uid to 0:
Operation not permitted", which has now been silenced. [GL #1042]
[GL #1090]
When named-checkconf -z was run, it would sometimes incorrectly set
its exit code. It reflected the status of the last view found;
if zone-loading errors were found in earlier configured views but
not in the last one, the exit code indicated success. Thanks
to Graham Clinch. [GL #1807]
When built without LMDB support, named failed to restart after
a zone with a double quote (") in its name was added with rndc
addzone. Thanks to Alberto Fernández. [GL #1695]"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.11.17/RELEASE-NOTES-bind-9.11.17.html
"Notes for BIND 9.11.17
Feature Changes
The configure option --with-libxml2 now uses pkg-config to detect
libxml2 library availability. You will either have to install pkg-config
or specify the exact path where libxml2 has been installed on your
system. [GL #1635]
Bug Fixes
Fixed re-signing issues with inline zones which resulted in records
being re-signed late or not at all."
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.11.11/RELEASE-NOTES-bind-9.11.11.html
"Security Fixes
A race condition could trigger an assertion failure when a large
number of incoming packets were being rejected. This flaw is disclosed
in CVE-2019-6471. [GL #942]
...
Bug Fixes
Glue address records were not being returned in responses to root priming
queries; this has been corrected. [GL #1092]
Interaction between DNS64 and RPZ No Data rule (CNAME *.) could cause
unexpected results; this has been fixed. [GL #1106]
named-checkconf now checks DNS64 prefixes to ensure bits 64-71 are zero.
[GL #1159]
named-checkconf could crash during configuration if configured to use "geoip
continent" ACLs with legacy GeoIP. [GL #1163]
named-checkconf now correctly reports missing dnstap-output option when dnstap
is set. [GL #1136]
Handle ETIMEDOUT error on connect() with a non-blocking socket. [GL #1133]"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Hi,
To save space linking the 'bind 9.11.5'-binaries was changed from statically to dynamically.
Changes to V2:
Removed unnecessary '*.so'-links.
Complete file sizes shrinked from ~4800K to ~1700K. Needs testing and confirmation!
I'm running this version right now under Core 124 - no seen problems so far.
Best,
Matthias
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Ein Paar Rootfiles erstellt.
./make.sh prefetch nach ./make.sh downloadsrc umbenannt.
git-svn-id: http://svn.ipfire.org/svn/ipfire/trunk@326 ea5c0bd1-69bd-2848-81d8-4f18e57aeed8
