- As all characters, except for the single quotation mark, are now allowed in the PSK
with the base64 encoding implemented then the error message in the English Lang file
has been changed to explicitly mention the single quotation mark rather than characters
as a generic message.
Fixes: Bug13029
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This went really bad with the latest CSS changes. So this is a
refactor/rewrite of the CGI without many modifications.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
There is no need to add a legend as I find it confusing. The change that
people are using an EOL is rather slim and so I don't to waste space.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is necessary since we now have a much shorter lifetime for the host
certificate. However, it is complicated to do this is which is why we
are copying the previous certificate and generate a new CSR. This is
then signed.
A caveat of this patch is that we do not rollover the key.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- In this v3 version have added translations for hostile networks in and hostile
networks out and log drop hostile in and log drop hostile out.
Fixes: bug12981
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- The Expires time heading for the Connections WUI page has seconds listed. However the
code is converting the seconds to hours:minutes:seconds.
- This patch is changing the heading to H:M:S in English and the equivalent in the other
languages. I have basewd this on the initial letter for Hours, Minutes & Seconds in
each of the languages.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- This error means that a section in extrahd.cgi about the mount path being incorrect
does not get shown for users with english language selected.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: bbitsch@ipfire.org
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Reiserfs was stopped in IPFire in Core Update 167. It has been announced that reiserfs
will be removed from the kernel in 2025.
- This patch gives a warning about this deprecation and removal if reiserfs is used. The
warning also requests that the user does a re-installation using either ext4 or xfs
filesystems.
- Tested out on a vm installation with reiserfs, ext4 and xfs. Messgae shown on system
with reiserfs filesystem but nopt on the other two.
- Warning message added into the English language file and ./make.sh lang run.
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- v2 version that has only the removed line in the language files diffs
- Line removed from de, en, es & fr
- No translations had been done for the other languages for that line.
Fixes: Bug#12701
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- This v2 patch has moved the extraHead variable into header.pl
- This patch marks all IP's that are in the Fixed list but are also in the dynamic range
that has been defined, in red.
- Additional function created to check if an ip address is in a defined range.
- Added an additional key item under the Fixed Leases table for Fixed IP in dynamic range
- Added line to English Language file for this key item.
- ./make lang run before commit.
- Tested in vm testbed and confirmed that any ip address in the Fixed Leases table that
is in the defined dynamic range is highlighted in red
- This uses the css background-color appoach from the first patch in this set.
- This patch only highlights those IP's that overlap in red but does nothing more. So a
user can still create new ones if they want but they will all show up in red.
- This patch flags up if people are doing things that they shouldn't be doing but allows
them to continue doing so without changing anything if they don't want to and so will
not break existing setups.
Fixes: Bug#10629
Tested-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Tested-by: Bernhard Bitsch <bbitsch@ipfire.org>
This removes support for building IPFire for 32 bit ARM architectures.
This has been decided in August 2022 with six months notice as there are
not very many users and hardware is generally not available any more.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This has been removed a long time ago and we should probably spend a
little bit more time on keeping the networking code tidy :)
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- 29 strings have been added (otp qrcode, ipblocklist, cve mmio stale
data)
- 8 strings have been improved
- 3 strings have been removed (rdrand and hwrng system, hardware
support)
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Since the kernel now always reports 256 bits of entropy to be available,
this CGI does not show any useful information anymore. To avoid
confusions, it will hereby be removed entirely.
Fixes: #12893
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
In make.sh-usage document:
- updated with descriptions for various commands
- removed descriptions for old commands
In make.sh script:
- updated make.sh usage line "Usage: $0 [OPTIONS] {build|check-manualpages|..."
- removed make.sh clear screen commands in build area and toolchain area
Signed-off-by: Jon Murphy <jon.murphy@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
- Strip tailing whitespaces
- Use shorter line length to make reading the files with editors or
terminals without automatic line break easier
- Slightly improve the content of these files
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
For people which just have found our source code especially over GitHub
sometimes seem to have problems finding out how to contribute. This is
sad as it prevents us building a bigger community. While we have a wiki
which conatins a lot informations, this seems to get overlooked. I guess
a contributing fact is that most software today has these informations
contained in the repository itself. While I am not going to duplicate
the wiki to have these informations in our repository I still think it
is a good idea to have a short guide to lead new contributers into the
right direction.
Someone now could argue that new people just a too * to look at the
right place and that's why we do not need these documents. I do not
think so because of several points:
First people get used to look for information at a readme. I guees that
is because of the fact both GitHub and Gitlab place the readme so
prominently.
Second starting in a new project is hard. Finding the right place where
to start is also not easy as every project is different. Giving people a
short introduction what the first steps could be is definitely needed.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org>
- 24 strings have been added (drop hostile and spoofed martians, fw red,
ids options and provider, pakfire update messages...)
- 3 strings have been inproved
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This has not been compiled into our version of wpa_supplicant (if it has
been ever) and so there is no danger to disable this without any further
ado.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update of lfs
- Update of rootfile
- Addition of Spanish file provided by Roberto Peña (listed as author)
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
