These two patches are needed to support SFP's on NXP DPAA2 platforms
(e.g Traverse Ten64).
The deadlock issue patch was submitted upstream a while ago and
rejected, however I am not aware of any better solutions at present.
The 10G mode additions are part of mainline since 5.16.
These two .patches were sourced from our patchset over here:
https://gitlab.com/traversetech/traverse-kernel-patches/-/tree/lts-5-15/patches
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 3.2.4 plus CVE-2022-29154 patch to 3.2.6
- Patch for CVE-2022-29154 applied in CU170 turned out to have a bug within it causing
rsync to fail with an error. Four additional commits were done to fix this bug and
its consequences but these were all applied in the rsync git repo after the patch had
been merged into CU170.
- Version 3.2.5 onwards contains the CVE-2022-29154 fix and associated commits.
- No update of rootfile required.
- Changelog
NEWS for rsync 3.2.6 (9 Sep 2022)
BUG FIXES:
More path-cleaning improvements in the file-list validation code to avoid
rejecting of valid args.
A file-list validation fix for a --files-from file that ends without a
line-terminating character.
Added a safety check that prevents the sender from removing destination
files when a local copy using --remove-source-files has some files that are
shared between the sending & receiving hierarchies, including the case
where the source dir & destination dir are identical.
Fixed a bug in the internal MD4 checksum code that could cause the digest to
be sporadically incorrect (the openssl version was/is fine).
A minor tweak to rrsync added "copy-devices" to the list of known args, but
left it disabled by default.
ENHANCEMENTS:
Rename --protect-args to --secluded-args to make it clearer how it differs
from the default backslash-escaped arg-protecting behavior of rsync. The
old option names are still accepted. The environment-variable override did
not change its name.
PACKAGING RELATED:
The configure option --with-protected-args was renamed to
--with-secluded-args. This option makes --secluded-args the default rsync
behavior instead of using backslash escaping for protecting args.
The mkgitver script now makes sure that a .git dir/file is in the top-level
source dir before calling git describe. It also runs a basic check on the
version value. This should avoid using an unrelated git description for
rsync's version.
DEVELOPER RELATED:
The configure script no longer sets the -pedantic-errors CFLAG (which it
used to try to do only for gcc).
The name_num_obj struct was modified to allow its dynamic name_num_item list
to be initialized in a better way.
NEWS for rsync 3.2.5 (14 Aug 2022)
SECURITY FIXES:
Added some file-list safety checking that helps to ensure that a rogue
sending rsync can't add unrequested top-level names and/or include
recursive names that should have been excluded by the sender. These extra
safety checks only require the receiver rsync to be updated. When dealing
with an untrusted sending host, it is safest to copy into a dedicated
destination directory for the remote content (i.e. don't copy into a
destination directory that contains files that aren't from the remote host
unless you trust the remote host). Fixes CVE-2022-29154.
A fix for CVE-2022-37434 in the bundled zlib (buffer overflow issue).
BUG FIXES:
Fixed the handling of filenames specified with backslash-quoted wildcards
when the default remote-arg-escaping is enabled.
Fixed the configure check for signed char that was causing a host that
defaults to unsigned characters to generate bogus rolling checksums. This
made rsync send mostly literal data for a copy instead of finding matching
data in the receiver's basis file (for a file that contains high-bit
characters).
Lots of manpage improvements, including an attempt to better describe how
include/exclude filters work.
If rsync is compiled with an xxhash 0.8 library and then moved to a system
with a dynamically linked xxhash 0.7 library, we now detect this and
disable the XX3 hashes (since these routines didn't stabilize until 0.8).
ENHANCEMENTS:
The --trust-sender option was added as a way to bypass the extra file-list
safety checking (should that be required).
PACKAGING RELATED:
A note to those wanting to patch older rsync versions: the changes in this
release requires the quoted argument change from 3.2.4. Then, you'll want
every single code change from 3.2.5 since there is no fluff in this release.
The build date that goes into the manpages is now based on the developer's
release date, not on the build's local-timezone interpretation of the date.
DEVELOPER RELATED:
Configure now defaults GETGROUPS_T to gid_t when cross compiling.
Configure now looks for the bsd/string.h include file in order to fix the
build on a host that has strlcpy() in the main libc but not defined in the
main string.h file.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Changelog:
"6.0.8 -- 2022-09-27
Task #5552: libhtp 0.5.41
6.0.7 -- 2022-09-27
Security #5430: mqtt: DOS by quadratic with too many transactions in one parse (6.0.x backport)
Bug #5559: BUG_ON triggered from TmThreadsInjectFlowById (6.0.x backport)
Bug #5549: Failed assert DeStateSearchState (6.0.x)
Bug #5548: tcp: assertion failed in DoInsertSegment (BUG_ON) (6.0.x)
Bug #5547: rules: less strict parsing of unexpected flowbit options
Bug #5546: rules: don't error on bad hex in content
Bug #5540: detect: transform strip whitespace creates a 0-sized variable-length array: backport6
Bug #5505: http2: slow http2_frames_get_header_value_vec because of allocation [backport6]
Bug #5471: Reject action is no longer working (6.0.x backport)
Bug #5467: rules: more graceful handling of anomalies for stable versions
Bug #5459: Counters are not initialized in all places. (6.0.x backport)
Bug #5448: nfs: add maximum number of operations per compound (6.0.x backport)
Bug #5436: Infinite loop if the sniffing interface temporarily goes down (6.0.x backports)
Bug #5335: flow: vlan.use-for-tracking is not used for ICMPv4 (6.0.x backport)
Bug #4421: flow manager: using too much CPU during idle (6.0.x backport)
Feature #5535: ips: add "reject" action to exception policies (6.0.x backport)
Feature #5500: ips: midstream: add "exception policy" for midstream (6.0.x backport)
Task #5551: doc: add exception policy documentation (6.0.x)
Task #5533: detect/parse: add tests for parsing signatures with reject and drop action (6.0.x backport)
Task #5525: exceptions: error out when invalid configuration value is passed (6.0.x backport)
Task #5381: add `alert-queue-expand-fails` command-line option (6.0.x backport)
Task #5328: python: distutils deprecation warning (6.0.x backport)"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- Update from version 37 to 38
- Update of rootfile
- mandoc is now a build dependency for efivar
- Old compile fixes patches are no longer required with version 38
- Details for lfs build of version 38 obtained from Beyond Linux From Scratch
- Changelog
bug fixes
Rework some makefile bits to make overriding some options simpler. by @vathpela in #140
Handle /sys/devices/virtual/{nvme-fabrics,nvme-subsystem} devices by @vathpela in #139
guids.S: Include <cet.h> when CET is enabled by @hjl-tools in #149
Fix /sys/block sysfs parsing for eMMC-s by @jwrdegoede in #150
Properly check mmap return error by @hannob in #152
Fix s{yt,ty}le typo in efi_get_variable(3) by @nabijaczleweli in #162
Handle NULL set_variable() by @lcp in #159
Fix parsing for nvme-subsystem devices by @dannf in #158
Attempt to fix the identified thread safety bugs by @vathpela in #155
Make thread-test depend on libefivar.so by @hjl-tools in #176
Upstream a local patch from rawhide by @frozencemetery in #177
Fix conversion from UTF8 to UCS2 by @freedge in #171
efivar: make docs match current code for 'efivar -A' by @vathpela in #178
Migrate CI to Github actions by @frozencemetery in #179
Add code of conduct by @frozencemetery in #180
Misc minor fixes by @vathpela in #182
Add efi_time_t declarations and helper functions. by @vathpela in #183
More misc fixes by @vathpela in #185
Run CI on more targets by @vathpela in #187
Coverity fixes 20211208 by @vathpela in #189
CI: run abicheck by @frozencemetery in #190
Fix linux virtual root device parsing by @vathpela in #188
efivar.spec.in: fix license to be valid SPDX by @frozencemetery in #192
Add efisecdb tooling by @vathpela in #184
Fix linker string comparison for dash by @frozencemetery in #194
Full changelog diff between version 37 and 38 is available in github repo
https://github.com/rhboot/efivar/compare/37...38
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
This is a maintenance release that bundles all the previously added
patches, which have therefore been deleted.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Changelog:
"5.0.10 -- 2022-07-12
Bug #5429: TCP flow that retransmits the SYN with a newer TSval not properly tracked (5.0.x backport)
[Note: Therefore 'suricata-5.0-stream-tcp-Handle-retransmitted-SYN-with-TSval.patch' could be removed]
Bug #5424: inspection of smb traffic without smb/dcerpc doesn't work correct. (5.0.x backport)
Bug #5423: DCERPC protocol detection when nested in SMB (5.0.x backport)
Bug #5404: detect: will still inspect packets of a "dropped" flow for non-TCP (5.0.x backport)
Bug #5388: detect/threshold: offline time handling issue (5.0.x backports)
Bug #5358: test failure on Ubuntu 22.04 with GCC 12 (5.0.x backport)
Bug #5354: detect/alert: fix segvfault when incrementing discarded alerts if alert-queue-expand fails (5.0.x backport)
Bug #5345: CIDR prefix calculation fails on big endian archs (5.0.x backport)
Bug #5343: ftp: quadratic complexity for tx iterator with linked list (5.0.x backport)
Bug #5341: decode/mime: base64 decoding for data with spaces is broken (5.0.x backport)
Bug #5339: PreProcessCommands does not handle all the edge cases (5.0.x backport)
Bug #5325: FTP: expectation created in wrong direction (5.0.x backport)
Bug #5305: cppcheck: various static analyzer "warning"s
Bug #5302: Failed assert DeStateSearchState
Bug #5301: eve: payload field randomly missing even if the packet field is present
Bug #5289: Remove unneeded stack-on-signal initialization.
Bug #5283: 5.0.x: ftp: don't let first incomplete segment be over maximum length
Bug #5124: alerts: 5.0.8/6.0.4 count noalert sigs towards built-in alert limit (5.0.x backport)
Bug #5113: Off-by-one in flow-manager flow_hash row allocation
Bug #5055: Documentation copyright years are invalid
Bug #5021: dataset: error with space in rule language
Bug #4926: Rule error in SMB dce_iface and dce_opnum keywords (5.0.x backport)
Bug #4646: TCP reassembly, failed assert app_progress > last_ack_abs, both sides need to be pruned
Optimization #5123: alerts: use alert queing in DetectEngineThreadCtx (5.0.x backport)
Optimization #5121: Use configurable or more dynamic @ PACKET_ALERT_MAX@ (5.0.x backport)
Task #5322: stats/alert: log out to stats alerts that have been discarded from packet queue (5.0.x backport)"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Stefan Schantl <stefan.schantl@ipfire.org>
Reviewed-by: Stefan Schantl <stefan.schantl@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- Update from version 8.2 to 9.0
- Update of rootfile
- Remove gcc10 detection patch as this is now built into the source tarball
- Update hardening crash patch. The issue related to the gcc10 patch seems to suggest
that when that is fixed then the hardening crash patch is not required but it wasn't
100% clear. So I have left the patch in place as it only changes one line and if it
worked with the earlier versions then it should also work now. If it is decided that
it is not needed then it can always be removed at a future update.
- Changelog is massive with over 30000 lines.
vim provides fixed updates such as 8.2 and 9.0 but then issues very frequent patch
updates. For version 8.2 there are 5172 patch updates none of which have been applied
to IPFire. All of these are now built into version 9.0
https://vimhelp.org/version9.txt.html#new-9 provides the details of what is new with
version 9.0, including details of all the 5172 patches.
- Key thing for version 9.0 is that there is a new Vim9 script language which is not
backwards compatible. However the old legacy script language will continue to be
supported so all old scripts can continue to be used.
- Version 9.0 already has 48 patches released. The releases occur virtually every day
with several days having multiple patch releases.
- Once this 9.0 version of vim has been confirmed to work successfully by people
experienced in using vim (I struggle to remember the set of characters to press to
exit from an editing session), then my plan is to periodically submit an update of the
patches, although some may be missed out as they are not relevant for IPFire - such
as deleting Travis CI config and improving the recognition of some Visual Basic files.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
This patch, which has been merged into the mainline Linux kernel, but
not yet backported to the 5.15.x tree, precisely addresses our
situation: IPFire does not use systemd, but CONFIG_DEVTMPFS_MOUNT.
The only explanation I have for bug #12889 arising _now_ is that some
component (dracut, maybe) changed its behaviour regarding remounting of
already mounted special file systems. As current dracut won't (re)mount
any file system already found to be mounted, this means that the mount
options decided by the kernel remained untouched for /dev, hence being
weak in terms of options hardening possible.
As CONFIG_DEVTMPFS_SAFE would not show up in "make menuconfig", changes
to kernel configurations have been simulated.
Fixes: #12889
Cc: Michael Tremer <michael.tremer@ipfire.org>
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
- lfs and rootfile created
- Patch created to remove requirement for winapi and related windows dependencies
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
- lfs and rootfile created
- Patch created to remove requirement for winapi and related windows dependencies
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Changes in version 0.4.7.8 - 2022-06-17
This version fixes several bugfixes including a High severity security issue
categorized as a Denial of Service. Everyone running an earlier version
should upgrade to this version.
o Major bugfixes (congestion control, TROVE-2022-001):
- Fix a scenario where RTT estimation can become wedged, seriously
degrading congestion control performance on all circuits. This
impacts clients, onion services, and relays, and can be triggered
remotely by a malicious endpoint. Tracked as CVE-2022-33903. Fixes
bug 40626; bugfix on 0.4.7.5-alpha.
o Minor features (fallbackdir):
- Regenerate fallback directories generated on June 17, 2022.
o Minor features (geoip data):
- Update the geoip files to match the IPFire Location Database, as
retrieved on 2022/06/17.
o Minor bugfixes (linux seccomp2 sandbox):
- Allow the rseq system call in the sandbox. This solves a crash
issue with glibc 2.35 on Linux. Patch from pmu-ipf. Fixes bug
40601; bugfix on 0.3.5.11.
o Minor bugfixes (logging):
- Demote a harmless warn log message about finding a second hop to
from warn level to info level, if we do not have enough
descriptors yet. Leave it at notice level for other cases. Fixes
bug 40603; bugfix on 0.4.7.1-alpha.
- Demote a notice log message about "Unexpected path length" to info
level. These cases seem to happen arbitrarily, and we likely will
never find all of them before the switch to arti. Fixes bug 40612;
bugfix on 0.4.7.5-alpha.
o Minor bugfixes (relay, logging):
- Demote a harmless XOFF log message to from notice level to info
level. Fixes bug 40620; bugfix on 0.4.7.5-alpha.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
- CVE-2022-26505 A DNS rebinding issue in ReadyMedia (formerly MiniDLNA) before 1.3.1
allows a remote web server to exfiltrate media files. CVE created on 6th March 2022
- minidlna have created the patches to fix CVE-2022-26505 and have created a git tag for
version 1.3.1 but have not provided any 1.3.1 source tarballs. A ticket was raised on
14th March 2022 in the source forge support system asking to "Please publish a tarball
for 1.3.1" but there was no reply from the developer so far.
- In the NIST National Vulnerability Database it refers to a fix implemented in 1.3.1 but
the link to the sourceforge page is only the patches applied for the fix
- I used those diff descriptions to create a patch to implement on the existing 1.3.0
version in IPFire and this patch submission applies that fix
- Incremented the lfs PAK_VER
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- Update from version 2.4.49 to 2.6.1
- Update of rootfile
- Update of consolidated patch to 2.6.1
- Removal of old patches
- Changelog
OpenLDAP 2.6.1 Release (2022/01/20)
Fixed libldap to init client socket port (ITS#9743)
Fixed libldap with referrals (ITS#9781)
Added slapd config keyword for logfile format (ITS#9745)
Fixed slapd to allow objectClass edits with no net change (ITS#9772)
Fixed slapd configtable population (ITS#9576)
Fixed slapd to only set loglevel in server mode (ITS#9715)
Fixed slapd logfile-rotate use of uninitialized variable (ITS#9730)
Fixed slapd passwd scheme handling with slapd.conf (ITS#9750)
Fixed slapd postread support for modrdn (ITS#7080)
Fixed slapd syncrepl recreation of deleted entries (ITS#9282)
Fixed slapd syncrepl replication with ODSEE (ITS#9707)
Fixed slapd syncrepl to properly replicate glue entries (ITS#9647)
Fixed slapd syncrepl to reject REFRESH for precise resync (ITS#9742)
Fixed slapd syncrepl to avoid busy loop during refresh (ITS#9584)
Fixed slapd syncrepl when X-ORDERED is specified (ITS#9761)
Fixed slapd syncrepl to better handle out of order delete ops (ITS#9751)
Fixed slapd syncrepl to correctly close connections when config is deleted (ITS#9776)
Fixed slapd-mdb to update indices correctly on replace ops (ITS#9753)
Fixed slapd-wt to set correct flags (ITS#9760)
Fixed slapo-accesslog to fix assertion due to deprecated code (ITS#9738)
Fixed slapo-accesslog to fix inconsistently normalized minCSN (ITS#9752)
Fixed slapo-accesslog delete handling of multi-valued config attrs (ITS#9493)
Fixed slapo-autogroup to maintain values in insertion order (ITS#9766)
Fixed slapo-constraint to maintain values in insertion order (ITS#9770)
Fixed slapo-dyngroup to maintain values in insertion order (ITS#9762)
Fixed slapo-dynlist compare operation for static groups (ITS#9747)
Fixed slapo-dynlist static group filter with multiple members (ITS#9779)
Fixed slapo-ppolicy when not built modularly (ITS#9733)
Fixed slapo-refint to maintain values in insertion order (ITS#9763)
Fixed slapo-retcode to honor requested insert position (ITS#9759)
Fixed slapo-sock cn=config support (ITS#9758)
Fixed slapo-syncprov memory leak (ITS#8039)
Fixed slapo-syncprov to generate a more accurate accesslog query (ITS#9756)
Fixed slapo-syncprov to allow empty DB to host persistent syncrepl connections (ITS#9691)
Fixed slapo-syncprov to consider all deletes for sycnInfo messages (ITS#5972)
Fixed slapo-translucent to warn on invalid config (ITS#9768)
Fixed slapo-unique to warn on invalid config (ITS#9767)
Fixed slapo-valsort to maintain values in insertion order (ITS#9764)
Build Environment
Fix test022 to preserve DELAY search output (ITS#9718)
Fix slapd-watcher to allow startup when servers are down (ITS#9727)
Contrib
Fixed slapo-lastbind to work with 2.6 lastbind-precision configuration (ITS#9725)
Documentation
Fixed slapd.conf(5)/slapd-config(5) documentation on lastbind-precision (ITS#9728)
Fixed slapo-accesslog(5) to clarify logoldattr usage (ITS#9749)
OpenLDAP 2.6.0 Release (2021/10/25)
Initial release for "general use".
OpenLDAP 2.5.7 Release (2021/08/18)
Fixed lloadd client state tracking (ITS#9624)
Fixed slapd bconfig to canonicalize structuralObjectclass (ITS#9611)
Fixed slapd-ldif duplicate controls response (ITS#9497)
Fixed slapd-mdb multival crash when attribute is missing an equality matchingrule (ITS#9621)
Fixed slapd-mdb compatibility with OpenLDAP 2.4 MDB databases (ITS#8958)
Fixed slapd-mdb idlexp maximum size handling (ITS#9637)
Fixed slapd-monitor number of ops executing with asynchronous backends (ITS#9628)
Fixed slapd-sql to add support for ppolicy attributes (ITS#9629)
Fixed slapd-sql to close transactions after bind and search (ITS#9630)
Fixed slapo-accesslog to make reqMod optional (ITS#9569)
Fixed slapo-ppolicy logging when pwdChangedTime attribute is not present (ITS#9625)
Documentation
slapd-mdb(5) note max idlexp size is 30, not 31 (ITS#9637)
slapo-accesslog(5) note that reqMod is optional (ITS#9569)
Add ldapvc(1) man page (ITS#9549)
Add guide section on load balancer (ITS#9443)
Updated guide to document multiprovider as replacement for mirrormode (ITS#9200)
Updated guide to clarify slapd-mdb upgrade requirements (ITS#9200)
Updated guide to document removal of deprecated options from client tools (ITS#9200)
OpenLDAP 2.5.6 Release (2021/07/27)
Fixed libldap buffer overflow (ITS#9578)
Fixed libldap missing mutex unlock on connection alloc failure (ITS#9590)
Fixed lloadd cn=config olcBkLloadClientMaxPending setting (ITS#8747)
Fixed slapd multiple config defaults (ITS#9363)
Fixed slapd ipv6 addresses to work with tcp wrappers (ITS#9603)
Fixed slapo-syncprov delete of nonexistent sessionlog (ITS#9608)
Build
Fixed library symbol versioning on Solaris (ITS#9591)
Fixed compile warning in libldap/tpool.c (ITS#9601)
Fixed compile warning in libldap/tls_o.c (ITS#9602)
Contrib
Fixed ppm module for sysconfdir (ITS#7832)
Documentation
Updated guide to document multival, idlexp, and maxentrysize (ITS#9613, ITS#9614)
OpenLDAP 2.5.5 Release (2021/06/03)
Added libldap LDAP_OPT_TCP_USER_TIMEOUT support (ITS#9502)
Added lloadd tcp-user-timeout support (ITS#9502)
Added slapd-asyncmeta tcp-user-timeout support (ITS#9502)
Added slapd-ldap tcp-user-timeout support (ITS#9502)
Added slapd-meta tcp-user-timeout support (ITS#9502)
Fixed incorrect control OIDs for AuthZ Identity (ITS#9542)
Fixed libldap typo in util-int.c (ITS#9541)
Fixed libldap double free of LDAP_OPT_DEFBASE (ITS#9530)
Fixed libldap better TLS1.3 cipher suite handling (ITS#9521, ITS#9546)
Fixed lloadd multiple issues (ITS#8747)
Fixed slapd slap_op_time to avoid duplicates across restarts (ITS#9537)
Fixed slapd typo in daemon.c (ITS#9541)
Fixed slapd slapi compilation (ITS#9544)
Fixed slapd to handle empty DN in extended filters (ITS#9551)
Fixed slapd syncrepl searches with empty base (ITS#6467)
Fixed slapd syncrepl refresh on startup (ITS#9324, ITS#9534)
Fixed slapd abort due to typo (ITS#9561)
Fixed slapd-asyncmeta quarantine handling (ITS#8721)
Fixed slapd-asyncmeta to have a default operations timeout (ITS#9555)
Fixed slapd-ldap quarantine handling (ITS#8721)
Fixed slapd-mdb deletion of context entry (ITS#9531)
Fixed slapd-mdb off-by-one affecting search scope (ITS#9557)
Fixed slapd-meta quarantine handling (ITS#8721)
Fixed slapo-accesslog to record reqNewDN for modRDN ops (ITS#9552)
Fixed slapo-pcache locking during expiration (ITS#9529)
Build
Fixed slappw-argon2 module installation (ITS#9548)
Contrib
Update ldapc++/ldaptcl to use configure.ac (ITS#9554)
Documentation
ldap_first_attribute(3) - Document ldap_get_attribute_ber (ITS#8820)
ldap_modify(3) - Delete non-existent mod_next parameter (ITS#9559)
OpenLDAP 2.5.4 Release (2021/04/29)
Initial release for "general use".
OpenLDAP 2.4.57 Release (2021/01/18)
Fixed ldapexop to use correct return code (ITS#9417)
Fixed slapd to remove asserts in UUIDNormalize (ITS#9391)
Fixed slapd to remove assert in csnValidate (ITS#9410)
Fixed slapd validity checks for issuerAndThisUpdateCheck (ITS#9411, ITS#9427)
Fixed slapd validity checks for serialNumberAndIssuerCheck (ITS#9404, ITS#9424)
Fixed slapd AVA sort with invalid RDN (ITS#9412)
Fixed slapd ldap_X509dn2bv to check for invalid BER after RDN count (ITS#9423, ITS#9425)
Fixed slapd saslauthz to remove asserts in validation (ITS#9406, ITS#9407)
Fixed slapd saslauthz to use slap_sl_free on normalized DN (ITS#9409)
Fixed slapd saslauthz SEGV in slap_parse_user (ITS#9413)
Fixed slapd modrdn memory leak (ITS#9420)
Fixed slapd double-free in vrfilter (ITS#9408)
Fixed slapd cancel operation to correctly terminate (ITS#9428)
Fixed slapd-ldap fix binds on retry with closed connection (ITS#9400)
Fixed slapo-syncprov to ignore duplicate sessionlog entries (ITS#9394)
OpenLDAP 2.4.56 Release (2020/11/10)
Fixed slapd to remove assert in certificateListValidate (ITS#9383)
Fixed slapd to remove assert in csnNormalize23 (ITS#9384)
Fixed slapd to better parse ldapi listener URIs (ITS#9379)
OpenLDAP 2.4.55 Release (2020/10/26)
Fixed slapd normalization handling with modrdn (ITS#9370)
Fixed slapd-meta to check ldap_install_tls return code (ITS#9366)
Contrib
Fixed nssov misplaced semicolon (ITS#8731, ITS#9368)
OpenLDAP 2.4.54 Release (2020/10/12)
Fixed slapd delta-syncrepl to ignore delete ops on deleted entry (ITS#9342)
Fixed slapd delta-syncrepl to be fully serialized (ITS#9330)
Fixed slapd delta-syncrepl MOD on zero-length context entry (ITS#9352)
Fixed slapd syncrepl to be fully serialized (ITS#8102)
Fixed slapd syncrepl to call check_syncprov on fresh consumer (ITS#9345)
Fixed slapd syncrepl to propagate errors from overlay_entry_get_ov (ITS#9355)
Fixed slapd syncrepl to not create empty ADD ops (ITS#9359)
Fixed slapd syncrepl replace usage on single valued attrs (ITS#9295)
Fixed slapd-monitor fix monitor_back_register_database for empty suffix DB (ITS#9353)
Fixed slapo-accesslog normalizer for reqStart (ITS#9358)
Fixed slapo-accesslog to not generate new contextCSN on purge (ITS#9361)
Fixed slapo-syncprov contextCSN generation with empty suffix (ITS#9015)
Fixed slapo-syncprov sessionlog to use a TAVL tree (ITS#8486)
OpenLDAP 2.4.53 Release (2020/09/07)
Added slapd syncrepl additional SYNC logging (ITS#9043)
Fixed slapd syncrepl segfault on NULL cookie on REFRESH (ITS#9282)
Fixed slapd syncrepl to use fresh connection on REFRESH fallback (ITS#9338)
Fixed slapo-ppolicy race condition for pwdFailureTime (ITS#9302,ITS#9334)
Build
Require OpenSSL 1.0.2 or later (ITS#9323)
Fixed libldap compilation issue with broken C compilers (ITS#9332)
OpenLDAP 2.4.52 Release (2020/08/28)
Added libldap LDAP_OPT_X_TLS_REQUIRE_SAN option (ITS#9318)
Added libldap OpenSSL support for multiple EECDH curves (ITS#9054)
Added slapd OpenSSL support for multiple EECDH curves (ITS#9054)
Fixed librewrite malloc/free corruption (ITS#9249)
Fixed libldap hang when using UDP and server down (ITS#9328)
Fixed slapd syncrepl rare deadlock due to network issues (ITS#9324)
Fixed slapd syncrepl regression that could trigger an assert (ITS#9329)
Fixed slapd-mdb index error with collapsed range (ITS#9135)
OpenLDAP 2.4.51 Release (2020/08/11)
Added slapo-ppolicy implement Netscape password policy controls (ITS#9279)
Fixed libldap retry loop in ldap_int_tls_connect (ITS#8650)
Fixed libldap to use getaddrinfo in ldap_pvt_get_fqdn (ITS#9287)
Fixed slapd to enforce singular existence of some overlays (ITS#9309)
Fixed slapd syncrepl to not delete non-replicated attrs (ITS#9227)
Fixed slapd syncrepl to correctly delete entries on resync (ITS#9282)
Fixed slapd syncrepl to use replace on single valued attrs (ITS#9294, ITS#9295)
Fixed slapd-perl dynamic config with threaded slapd (ITS#7573)
Fixed slapo-ppolicy to expose the ppolicy control (ITS#9285)
Fixed slapo-ppolicy race condition for pwdFailureTime (ITS#9302)
Fixed slapo-ppolicy so it can only exist once per DB (ITS#9309)
Fixed slapo-chain to check referral (ITS#9262)
Build Environment
Fix test064 so it no longer uses bashisms (ITS#9263)
Contrib
Fix default prefix value for pw-argon2, pw-pbkdf2 modules (ITS#9248)
slapo-allowed - Fix usage of unitialized variable (ITS#9308)
Documentation
ldap_parse_result(3) - Document ldap_parse_intermediate (ITS#9271)
OpenLDAP 2.4.50 Release (2020/04/28)
Fixed client benign typos (ITS#8890)
Fixed libldap type cast (ITS#9175)
Fixed libldap retry loop in ldap_int_tls_connect (ITS#8650)
Fixed libldap_r race on Windows mutex initialization (ITS#9181)
Fixed liblunicode memory leak (ITS#9198)
Fixed slapd benign typos (ITS#8890)
Fixed slapd to limit depth of nested filters (ITS#9202)
Fixed slapd-mdb memory leak in dnSuperiorMatch (ITS#9214)
Fixed slapo-pcache database initialization (ITS#9182)
Fixed slapo-ppolicy callback (ITS#9171)
Build
Fix olcDatabaseDummy initialization for windows (ITS#7074)
Fix detection for ws2tcpip.h for windows (ITS#8383)
Fix back-mdb types for windows (ITS#7878)
Contrib
Update ldapc++ config.guess and config.sub to support newer architectures (ITS#7855)
Added pw-argon2 module (ITS#9233, ITS#8575, ITS#9203, ITS#9206)
Documentation
slapd-ldap(5) - Clarify idassert-authzfrom behavior (ITS#9003)
slapd-meta(5) - Remove client-pr option (ITS#8683)
slapindex(8) - Fix truncate option information for back-mdb (ITS#9230)
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
- Update from version 4.1.0 to 4.1.0 plus patches 1 to 13
- Version 4.1.0 was released on 10-07-2020. However patches have been progressively
issued to fix various bugs that have been identified.
- Currently 13 patches have been issued and mpfr provide a cumulative patches file to
use to patch the source file.
- Update of rootfile
- Patch changelog
1 With GCC (the only tested compiler with software _Decimal128), conversions of
double to _Decimal128 yield an increase of 2 to 3 MB for the generated library
code when the decimal encoding is BID (designed for software implementations),
even though the conversions done in MPFR are very simple. Details about this GCC
issue. The decimal128-conv patch avoids these conversions by directly using
_Decimal128 constants. Note that fixing the issue entirely would require to get
rid of all the decimal128 operations; in the mean time, decimal support (i.e.
mpfr_get_decimal128 and mpfr_set_decimal128 functions) could be disabled at
configure time.
Corresponding changeset in the 4.1 branch: 14094.
2 The random_deviate.c file contains non-portable code. This is fixed by the
random_deviate patch.
Corresponding changeset in the 4.1 branch: 14126.
3 In the mpfr_set_z_2exp function, a huge mpz_t value can yield an integer overflow.
This is fixed by the set_z_2exp-overflow patch (with testcases). Note that in
practice, an integer overflow may occur only with a 32-bit ABI. Moreover, with a
usual compilation, an integer overflow should here not yield any particular issue,
assuming that the processor does signed addition and multiplication modulo 2^32 (as
usual). However, UBsan would detect the overflow, and LTO might have unpredictable
effects.
Corresponding changesets in the 4.1 branch: 14147, 14151.
4 Some function prototypes are slightly inconsistent. This is valid C code, but
these inconsistencies are unintended and possibly confusing, and they trigger
diagnostics with the -Warray-parameter option of the future GCC 11 (included in
-Wall). This causes issues when testing MPFR. And since mpfr.h is concerned, this
might also affect user code. This is fixed by the prototypes patch.
Corresponding changeset in the 4.1 branch: 14411.
5 In uncommon cases, the mpfr_digamma function needs to use an intermediate
precision equal to the exponent of the input value, which may be huge. This is
inefficient, and the code can request more memory than available, yielding a crash.
The digamma-hugemem patch improves the implementation by making such a need much
rarer; it also provides testcases showing a crash on 64-bit machines (at least).
Corresponding changeset in the 4.1 branch: 14424.
6 The mpfr_digamma function may have an erratic behavior in some cases (an assertion
failure in debug mode). This is fixed by the digamma-interm-zero patch (with
testcase).
Corresponding changeset in the 4.1 branch: 14425.
7 The Bessel functions (mpfr_j0, mpfr_j1, mpfr_jn, mpfr_y0, mpfr_y1, mpfr_yn) may
have an erratic behavior in some cases (an assertion failure in debug mode). This
is fixed by the jn-interm-zero patch (with testcase).
Corresponding changeset in the 4.1 branch: 14426.
8 The mpfr_digamma function may have an erratic behavior in some cases (an assertion
failure in debug mode) when the reflection formula is used, i.e. when x < 1/2.
This is fixed by the digamma-interm-zero2 patch (with testcase).
Corresponding changeset in the 4.1 branch: 14435.
9 The Bessel functions (mpfr_j0, mpfr_j1, mpfr_jn, mpfr_y0, mpfr_y1, mpfr_yn) may
have an erratic behavior in some cases (an assertion failure in debug mode) when
the asymptotic expansion is needed. This is fixed by the jyn_asympt-interm-zero
patch (with testcase).
Corresponding changeset in the 4.1 branch: 14436.
10 Some functions are also implemented as macros, and such a macro should behave
exactly like the corresponding function (if the code is valid for the function
call). However, the following macros do not behave as if their argument were
implicitly converted to the type from the function prototype: mpfr_nan_p,
mpfr_inf_p, mpfr_zero_p, mpfr_regular_p, mpfr_get_prec, mpfr_get_exp,
mpfr_copysign (third argument), mpfr_signbit and mpfr_set (second argument). For
instance, providing an argument of type void * instead of mpfr_ptr or mpfr_srcptr
will yield a compilation failure. Note that this issue does not exist in C++,
which does not support such implicit conversions. Moreover, the mpfr_set macro
evaluates its second argument twice (reported by David McCooey), which is
incorrect if this evaluation has side effects. This is fixed by the macros patch
(with testcases). Macros for the custom interface, which are explicitly documented
as provided, do not follow these rules; the patch clarifies this point in the MPFR
manual.
Corresponding changesets in the 4.1 branch: 14468, 14469.
11 The test programs tset_si and tset_sj fail if MPFR_USE_NO_MACRO is defined (e.g.,
via -DMPFR_USE_NO_MACRO in CFLAGS). This is fixed by the tset_sij patch.
Corresponding changeset in the 4.1 branch: 14470.
12 The mpfr_get_str_ndigits function may raise the inexact flag. In a very reduced
exponent range (e.g. in which the result would not be representable as a MPFR
number), it has undefined behavior: it may return an incorrect value, crash, or
loop, taking more and more memory. This is fixed by the get_str_ndigits patch,
which also updates the tests to check these issues.
Corresponding changeset in the 4.1 branch: 14490.
13 The code for the formatted output functions (mpfr_printf, etc.) contains an
incorrect assertion, checked only in debug mode, i.e. when MPFR has been
configured with --enable-assert; this assertion failure occurs when the integer 0
(of either a native type or mpfr_prec_t with the length specifier P) is output
with the precision field equal to 0, i.e. when the corresponding string to output
is empty. Otherwise, there should be no side effects since the code is actually
valid in this case; but since the code incorrectly instructs the compiler that
some variable cannot be 0, there might be an issue with some optimizations (very
unlikely, though). This bug is fixed by the vasprintf-prec-zero patch, which also
provides testcases.
Corresponding changesets in the 4.1 branch: 14524, 14525.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Changelog:
"5.0.9 -- 2022-04-21
Security #4889: ftp: SEGV at flow cleanup due to protocol confusion
Security #5025: ftp: GetLine function buffers data indefinitely if 0x0a was not found int the frag'd input
Security #5028: smtp: GetLine function buffers data indefinitely if 0x0a was not found in the frag'd input
Security #5253: Infinite loop in JsonFTPLogger
Feature #4644: pthreads: set minimum stack size
Bug #4466: dataset file not written when run as user
Bug #4678: Configuration test mode succeeds when reference.config file contains invalid content
Bug #4745: Absent app-layer protocol is always enabled by default
Bug #4819: tcp: insert_data_normal_fail can hit without triggering memcap
Bug #4823: conf: quadratic complexity
Bug #4825: pppoe decoder fails when protocol identity field is only 1 byte
Bug #4827: packetpool: packets in pool may have capture method ReleasePacket callbacks set
Bug #4838: af-packet: cluster_id is not used when trying to set fanout support
Bug #4878: datasets: memory leak in 5.0.x
Bug #4887: dnp3: buffer over read in logging base64 empty objects
Bug #4891: protodetect: SMB vs TLS protocol detection in midstream
Bug #4893: TFTP: memory leak due to missing detect state
Bug #4895: Memory leak with signature using file_data and NFS
Bug #4897: profiling: Invalid performance counter when using sampling
Bug #4901: eve: memory leak related to dns
Bug #4932: smtp: smtp transaction not logged if no email is present
Bug #4955: stream: too aggressive pruning in lossy streams
Bug #4957: SMTP assertion triggered
Bug #4959: suricatasc loop if recv returns no data
Bug #4961: dns: transaction not created when z-bit set
Bug #4963: Run stream reassembly on both directions upon receiving a FIN packet
Bug #5058: dns: probing/parser can return error when it should return incomplete
Bug #5063: Not keyword matches in Kerberos requests
Bug #5096: output: timestamp missing usecs on Arm 32bit + Musl
Bug #5099: htp: server personality radix handling issue
Bug #5101: defrag: policy config can setup radix incorrectly
Bug #5103: Application log cannot to be re-opened when running as non-root user
Bug #5105: iprep: cidr support can set up radix incorrectly
Bug #5107: detect/iponly: rule parsing does not always apply netmask correctly
Bug #5109: swf: coverity warning
Bug #5115: detect/ip_proto: inconsistent behavior when specifying protocol by string
Bug #5117: detect/iponly: mixing netblocks can lead to FN/FP
Bug #5119: smb: excessive CPU utilization and higher packet processing latency due to excessive calls to Vec::extend_from_slice()
Bug #5137: smb: excessive memory use during file transfer
Bug #5150: nfs: Integer underflow in NFS
Bug #5157: xbits: noalert is allowed in rule language with other commands
Bug #5164: iprep: use_cnt can get desynchronized (SIGABRT)
Bug #5171: detect/iponly: non-cidr netmask settings can lead incorrect radix tree
Bug #5193: SSL : over allocation for certificates
Bug #5213: content:"22 2 22"; is parsed without error
Bug #5227: 5.0.x: SMB: Wrong buffer being checked for possible overflow.
Bug #5251: smb: integer underflows and overflows
Task #5006: libhtp 0.5.40"
Additionally, I moved the 'suricata' patch files into a separate directory.
Apart from some line numbers, nothing else was changed.
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org>
Reviewed-by: Adolf Belka <adolf.belka@ipfire.org>
flashrom needs access to /dev/io ports for flashing firmware, a
functionality we cannot cease to support. Therefore, LSM constraints are
disabled for ioport.c, hopefully permitting us to keep it enabled.
Reported-by: Arne Fitzenreiter <arne.fitzenreiter@ipfire.org>
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
- Malicious filenames can make xzgrep to write to arbitrary files
or (with a GNU sed extension) lead to arbitrary code execution.
- xzgrep from XZ Utils versions up to and including 5.2.5 are
affected. 5.3.1alpha and 5.3.2alpha are affected as well.
- This bug was inherited from gzip's zgrep. gzip 1.12 includes
a fix for zgrep.
- CU167 has gzip-1.12 with the fix already merged.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
