$Lang::tr{'source ip'}:
$outfwsettings{'DISPLAY_SIP'}
- Quell-MAC-Adresse:
- $outfwsettings{'DISPLAY_SMAC'}
END
;
@@ -370,8 +368,8 @@ if ($outfwsettings{'POLICY'} ne 'MODE0'){
&Header::openbox('100%', 'center', 'P2P-Block');
print <
- Protokoll
- Status
+ $Lang::tr{'protocol'}
+ $Lang::tr{'status'}
END
;
my $id = 1;
@@ -408,7 +406,7 @@ END
}
print <
-
- Modus 0: In diesem Modus ist es allen Rechnern im Netzwerk uneingeschraenkt moeglich Verbindungen ins Internet aufzubauen. Modus 1: In diesem Modus werden nur Verbindungen nach den oben definierten Regeln zugelassen. Modus 2: In diesem Modus werden saemtliche Verbindungen erlaubt, bis auf die oben definierten Block-Regeln. $Lang::tr{'mode'} 0: $Lang::tr{'outgoingfw mode0'} $Lang::tr{'mode'} 1: $Lang::tr{'outgoingfw mode1'} $Lang::tr{'mode'} 2: $Lang::tr{'outgoingfw mode2'} Modus 0 Modus 1 Modus 2 $Lang::tr{'mode'} 0 $Lang::tr{'mode'} 1 $Lang::tr{'mode'} 2
END
;
if ($outfwsettings{'POLICY'} ne 'MODE0') {
print <
- Anmerkung: $Lang::tr{'description'}: Aktiviert:
+ $Lang::tr{'active'}:
Protokoll:
+ $Lang::tr{'protocol'}:
TCP TCP & UDP UDP Sicherheitspolitik:
+ $Lang::tr{'policy'}:
END
;
@@ -469,10 +467,10 @@ END
print "\t\t\tDENYQuellnetz:
+ $Lang::tr{'source net'}:
- alle
- Quell-IP/MAC benutzen
+ $Lang::tr{'all'}
+ $Lang::tr{'source ip'}
$Lang::tr{'green'}
END
;
@@ -484,15 +482,15 @@ END
}
print <
- Quell-IP-Adresse: $Lang::tr{'source ip'}: Logging:
+ $Lang::tr{'logging'}:
$Lang::tr{'active'} $Lang::tr{'inactive'} Quell-MAC-Adresse: Ziel-IP-Adresse: $Lang::tr{'destination ip'}: Ziel-Port: $Lang::tr{'destination port'}:
;
close FILE;
-print "$Lang::tr{'service'} $Lang::tr{'description'} $Lang::tr{'port'} $Lang::tr{'protocol'} $Lang::tr{'source net'} $Lang::tr{'logging'} $Lang::tr{'service'} $Lang::tr{'description'} $Lang::tr{'port'} $Lang::tr{'protocol'} $Lang::tr{'source net'} $Lang::tr{'logging'} $Lang::tr{'action'} )
-{
- next unless( /^([A-Za-z][^:\s]+)\s*:\s*([+\-]{0,1}[\d\.]+)/ ) ;
- $key = $1 ;
- $value = $2 ;
- $key =~ y/A-Z/a-z/ ;
- $mbmon_values{$key} = $value;
- print(MBMON_OUT "$key=$value\n");
-}
-close(FD);
-close(MBMON_OUT);
-
sub updatehdddata
{
- my $disk = $_[0];
- my $standby;
- my @array = split(/\//,$disk);
+ my $disk = $_[0];
+ my $standby;
+ my @array = split(/\//,$disk);
- if ( ! -e "$rrdlog/hddshutdown-".$array[$#array].".rrd"){
- # database did not exist -> create
- RRDs::create ("$rrdlog/hddshutdown-".$array[$#array].".rrd", "--step=300",
- "DS:standby:GAUGE:600:0:1",
- "RRA:AVERAGE:0.5:1:576",
- "RRA:AVERAGE:0.5:6:672",
- "RRA:AVERAGE:0.5:24:732",
- "RRA:AVERAGE:0.5:144:1460");
- $ERROR = RRDs::error;
- print "Error in RRD::create for hddshutdown-".$array[$#array].": $ERROR\n" if $ERROR;
- }
+ if ( ! -e "$rrdlog/hddshutdown-".$array[$#array].".rrd"){
+ # database did not exist -> create
+ RRDs::create ("$rrdlog/hddshutdown-".$array[$#array].".rrd", "--step=300",
+ "DS:standby:GAUGE:600:0:1",
+ "RRA:AVERAGE:0.5:1:576",
+ "RRA:AVERAGE:0.5:6:672",
+ "RRA:AVERAGE:0.5:24:732",
+ "RRA:AVERAGE:0.5:144:1460");
+ $ERROR = RRDs::error;
+ print "Error in RRD::create for hddshutdown-".$array[$#array].": $ERROR\n" if $ERROR;
+ }
- if (-e "/tmp/hddshutdown-".$array[$#array]) {$standby = 1;}
- else {$standby = 0;}
+ if (-e "/tmp/hddshutdown-".$array[$#array]) {$standby = 1;}
+ else {$standby = 0;}
- RRDs::update ("$rrdlog/hddshutdown-".$array[$#array].".rrd", "-t", "standby", "N:$standby");
- $ERROR = RRDs::error;
- print "Error in RRD::update for hddshutdown-".$array[$#array].": $ERROR\n" if $ERROR;
+ RRDs::update ("$rrdlog/hddshutdown-".$array[$#array].".rrd", "-t", "standby", "N:$standby");
+ $ERROR = RRDs::error;
+ print "Error in RRD::update for hddshutdown-".$array[$#array].": $ERROR\n" if $ERROR;
- if ( ! -e "$rrdlog/hddtemp-".$array[$#array].".rrd"){
- # database did not exist -> create
- RRDs::create ("$rrdlog/hddtemp-".$array[$#array].".rrd", "--step=300",
- "DS:temperature:GAUGE:600:0:100",
- "RRA:AVERAGE:0.5:1:576",
- "RRA:AVERAGE:0.5:6:672",
- "RRA:AVERAGE:0.5:24:732",
- "RRA:AVERAGE:0.5:144:1460");
- $ERROR = RRDs::error;
- print "Error in RRD::create for hdd-".$array[$#array].": $ERROR\n" if $ERROR;
- }
+ if ( ! -e "$rrdlog/hddtemp-".$array[$#array].".rrd"){
+ # database did not exist -> create
+ RRDs::create ("$rrdlog/hddtemp-".$array[$#array].".rrd", "--step=300",
+ "DS:temperature:GAUGE:600:0:100",
+ "RRA:AVERAGE:0.5:1:576",
+ "RRA:AVERAGE:0.5:6:672",
+ "RRA:AVERAGE:0.5:24:732",
+ "RRA:AVERAGE:0.5:144:1460");
+ $ERROR = RRDs::error;
+ print "Error in RRD::create for hdd-".$array[$#array].": $ERROR\n" if $ERROR;
+ }
- # Temperaturlesen wÃrde die Platte aufwecken!!!
- if (!$standby){
- $temp = 0;
- my $hdd_output = '';
- my $smart_output = '';
- if ( -e "$path_smartctl" ){system("$path_smartctl -iHA -d ata /dev/$disk > /var/log/smartctl_out_hddtemp-$disk");}
- if ( -e "/var/log/smartctl_out_hddtemp-".$array[$#array] ){
- $hdd_output = `cat /var/log/smartctl_out_hddtemp-$array[$#array] | grep Temperature_`;
- my @t = split(/\s+/,$hdd_output);
- $temp = $t[9];
- }else{$temp = 0;}
- print "Temperature for ".$array[$#array]."->".$temp."<-\n";
- system("echo \"Temperature for $array[$#array] -> $temp <-\n\" >>/tmp/debug");
- # Nur ins RDD wenn nicht 0 (sonst klappt die min Anzeige nicht)
- if ($temp){
- RRDs::update ("$rrdlog/hddtemp-".$array[$#array].".rrd", "-t", "temperature", "N:$temp");
- $ERROR = RRDs::error;
- print "Error in RRD::update for hdd-".$array[$#array].": $ERROR\n" if $ERROR;
- }
- }
-}
-
-sub updatembmondata
-{
- if ( ! -e "$rrdlog/mbmon.rrd" ){
- # database did not exist -> create
-
- @args = ("$rrdlog/mbmon.rrd");
- push(@args, "--step=300");
- foreach $key ( sort(keys %mbmon_values) ){push(@args, "DS:$key:GAUGE:600:U:U");}
- push(@args, "RRA:AVERAGE:0.5:1:576");
- push(@args, "RRA:AVERAGE:0.5:6:672");
- push(@args, "RRA:AVERAGE:0.5:24:732");
- push(@args, "RRA:AVERAGE:0.5:144:1460");
-
- print("create ". join( ", ", @args)) if ( $dbg );
- RRDs::create (@args);
- $ERROR = RRDs::error;
- print("Error in RRD::create for mbmon: $ERROR\n") if $ERROR;
- }
-
- my @ds;
- my @val;
- my $template;
-
- foreach $key ( sort(keys %mbmon_values) ){
- push(@ds, $key);
- push(@val, $mbmon_values{$key});
- }
-
- $template = join(':', @ds);
- $value = "N:".join(':', @val);
-
- print("update template = '$template'\n") if ( $dbg );
- print("update value = '$value'\n") if ( $dbg );
-
- RRDs::update("$rrdlog/mbmon.rrd", "-t", $template, $value);
- $ERROR = RRDs::error;
- print("Error in RRD::update for mbmon: $ERROR\n") if $ERROR;
+ # Temperaturlesen w�rde die Platte aufwecken!!!
+ if (!$standby){
+ $temp = 0;
+ my $smart_output = '';
+ system("$path_smartctl -iHA -d ata /dev/$disk > /var/log/smartctl_out_hddtemp-$disk");
+ if ( -e "/var/log/smartctl_out_hddtemp-".$array[$#array] ){
+ my $hdd_output = `cat /var/log/smartctl_out_hddtemp-$array[$#array] | grep Temperature_`;
+ my @t = split(/\s+/,$hdd_output);
+ $temp = $t[9];
+ }else{$temp = 0;}
+ print "Temperature for ".$array[$#array]."->".$temp."<-\n";
+ # Nur ins RDD wenn nicht 0 (sonst klappt die min Anzeige nicht)
+ if ($temp){
+ RRDs::update ("$rrdlog/hddtemp-".$array[$#array].".rrd", "-t", "temperature", "N:$temp");
+ $ERROR = RRDs::error;
+ print "Error in RRD::update for hdd-".$array[$#array].": $ERROR\n" if $ERROR;
+ }
+ }
}
## Update ipac logs
system ('/usr/sbin/fetchipac');
-sleep 8;
-
-###
-### Squid Graphs
-###
-if ( -e "/var/log/squid/access.log") {system ("/usr/bin/squid-graph -o=/srv/web/ipfire/html/sgraph --tcp-only < /var/log/squid/access.log >/dev/null 2>&1");}
-
-###
-### utf8 conversion
-###
-if ((${Lang::language} eq 'cs') || (${Lang::language} eq 'hu') || (${Lang::language} eq 'pl') || (${Lang::language} eq 'sk')) {
- # Czech, Hungarian, Polish and Slovak character set
- foreach my $key(keys %Lang::tr) {from_to($tr{$key}, "utf-8", "iso-8859-2");}
-} elsif (${Lang::language} eq 'tr') {
- # Turkish
- foreach my $key(keys %Lang::tr) {from_to($tr{$key}, "utf-8", "iso-8859-9");}
-} else {
- foreach my $key(keys %Lang::tr) {from_to($tr{$key}, "utf-8", "iso-8859-1");}
-}
-
-###
-### HDD graphs
-###
-
my @disks = `kudzu -qps -c HD | grep device: | cut -d" " -f2 | sort | uniq`;
system("unlink /tmp/hddstatus && touch /tmp/hddstatus");
-print "\nFound following amount of disks:".@disks."\n";
foreach (@disks){
- my $disk = $_;
- chomp $disk;
- print "Working on disk ".$disk.".\n";
+ my $disk = $_;
+ chomp $disk;
+ print "Working on disk ".$disk.".\n";
- my $status = "";
- my $diskstats = "";
- my $newdiskstats = "";
- my @array = split(/\//,$disk);
+ my $status = "";
+ my $diskstats = "";
+ my $newdiskstats = "";
+ my @array = split(/\//,$disk);
- $diskstats = `cat /tmp/hddstats-$array[$#array]`;
- chomp $diskstats;
- my $newdiskstats = `/usr/bin/iostat -d -t $disk | tail -2 | head -1 | awk '{ print \$5","\$6}'`;
- chomp $newdiskstats;
- my $status = `hdparm -C /dev/$disk | tail -1 | cut -d: -f2`;
- chomp $status;
+ $diskstats = `cat /tmp/hddstats-$array[$#array]`;
+ chomp $diskstats;
+ my $newdiskstats = `/usr/bin/iostat -d -t $disk | tail -2 | head -1 | awk '{ print \$5","\$6}'`;
+ chomp $newdiskstats;
+ my $status = `hdparm -C /dev/$disk | tail -1 | cut -d: -f2`;
+ chomp $status;
- if ($status !~/standby/ || $diskstats ne $newdiskstats){
- if (-e "/tmp/hddshutdown-".$array[$#array]){system("unlink /tmp/hddshutdown-".$array[$#array]);}
- }
+ if ($status !~/standby/ || $diskstats ne $newdiskstats){
+ if (-e "/tmp/hddshutdown-".$array[$#array]){system("unlink /tmp/hddshutdown-".$array[$#array]);}
+ }
- if (-e "/tmp/hddshutdown-".$array[$#array]){$status = " standby\n";}
- else{$status = " active\n";}
+ if (-e "/tmp/hddshutdown-".$array[$#array]){$status = " standby\n";}
+ else{$status = " active\n";}
- open(DATEI, ">>/tmp/hddstatus") || die "Datei nicht gefunden";
- print DATEI $disk."-".$status;
- close(DATEI);
-
- updatehdddata($disk);
+ open(DATEI, ">>/tmp/hddstatus") || die "Datei nicht gefunden";
+ print DATEI $disk."-".$status;
+ close(DATEI);
+ updatehdddata($disk);
}
-
-###
-### Mbmon Data
-###
-updatembmondata();
";
- print "
";
- if ( -e "/var/log/smartctl_out_${graph}" )
- {
- my $output = `/bin/cat /var/log/smartctl_out_${graph}`;
- $output = &Header::cleanhtml($output);
- print "
";
- }
- else
- {
- print $Lang::tr{'no information available'};
- }
- &Header::closebox();
- print "
";
+ print "";
+ print "
";
- print "";
- }
- else
- {
- print $Lang::tr{'no information available'};
- }
- print "
";
- print "";
- }
- else
- {
- print $Lang::tr{'no information available'};
- }
- print "
";
+ print "
";
print "
+