Kernel update to 2.6.27.39 (current stable).

config/rootfiles/common/linux

@@ -4,6 +4,11 @@ boot/config-KVER-ipfire
 boot/vmlinuz-KVER-ipfire
 boot/vmlinuz-ipfire
 #lib/firmware/atmsar11.fw
+#lib/firmware/cpia2
+#lib/firmware/cpia2/stv0672_vp4.bin
+#lib/firmware/dabusb
+#lib/firmware/dabusb/bitstream.bin
+#lib/firmware/dabusb/firmware.fw
 #lib/firmware/dsp56k
 #lib/firmware/dsp56k/bootstrap.bin
 #lib/firmware/edgeport
@@ -26,10 +31,10 @@ boot/vmlinuz-ipfire
 #lib/firmware/ess/maestro3_assp_minisrc.fw
 #lib/firmware/intelliport2.bin
 #lib/firmware/kaweth
-lib/firmware/kaweth/new_code.bin
-lib/firmware/kaweth/new_code_fix.bin
-lib/firmware/kaweth/trigger_code.bin
-lib/firmware/kaweth/trigger_code_fix.bin
+#lib/firmware/kaweth/new_code.bin
+#lib/firmware/kaweth/new_code_fix.bin
+#lib/firmware/kaweth/trigger_code.bin
+#lib/firmware/kaweth/trigger_code_fix.bin
 #lib/firmware/keyspan
 #lib/firmware/keyspan/mpr.fw
 #lib/firmware/keyspan/usa18x.fw
@@ -57,6 +62,10 @@ lib/firmware/kaweth/trigger_code_fix.bin
 #lib/firmware/ti_3410.fw
 #lib/firmware/ti_5052.fw
 #lib/firmware/tr_smctr.bin
+#lib/firmware/ttusb-budget
+#lib/firmware/ttusb-budget/dspbootcode.bin
+#lib/firmware/vicam
+#lib/firmware/vicam/firmware.fw
 #lib/firmware/whiteheat.fw
 #lib/firmware/whiteheat_loader.fw
 #lib/firmware/yamaha

config/rootfiles/core/34/filelists/linux

@@ -0,0 +1 @@
+../../../common/linux

config/rootfiles/core/34/filelists/linux-firmware

@@ -0,0 +1 @@
+../../../common/linux-firmware

config/rootfiles/core/34/update.sh

@@ -24,16 +24,108 @@
 . /opt/pakfire/lib/functions.sh
 /usr/local/bin/backupctrl exclude >/dev/null 2>&1
 #
-#Stop services
+KVER="2.6.27.39"
+ROOT=`grep "root=" /boot/grub/grub.conf | cut -d"=" -f2 | cut -d" " -f1 | tail -n 1`
+MOUNT=`grep "kernel" /boot/grub/grub.conf | tail -n 1`
+# Nur den letzten Parameter verwenden
+echo $MOUNT > /dev/null
+MOUNT=$_
+if [ ! $MOUNT == "rw" ]; then
+	MOUNT="ro"
+fi
 #
+# check if we the backup file already exist
+if [ -e /var/ipfire/backup/core-upgrade_$KVER.tar.bz2 ]; then
+    echo Moving backup to backup-old ...
+    mv -f /var/ipfire/backup/core-upgrade_$KVER.tar.bz2 \
+       /var/ipfire/backup/core-upgrade_$KVER-old.tar.bz2
+fi
+echo First we made a backup of all files that was inside of the
+echo update archive. This may take a while ...
+# Add some files that are not in the package to backup
+echo lib/modules >> /opt/pakfire/tmp/ROOTFILES
+echo boot >> /opt/pakfire/tmp/ROOTFILES
+echo etc/sysconfig/lm_sensors >> /opt/pakfire/tmp/ROOTFILES
 #
-extract_files
+tar cjvf /var/ipfire/backup/core-upgrade_$KVER.tar.bz2 \
+    -C / -T /opt/pakfire/tmp/ROOTFILES --exclude='#*' > /dev/null 2>&1
+echo
+echo Update Kernel to $KVER ...
+# Remove old kernel, configs, initrd, modules ...
 #
-#Start services
+rm -rf /boot/System.map-*
+rm -rf /boot/config-*
+rm -rf /boot/ipfirerd-*
+rm -rf /boot/vmlinuz-*
+# Don't remove old xen modules. Kernel may stored outside.
+rm -rf /lib/modules/*-ipfire
 #
-#Update Language cache
-#perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
-#Rebuild module dep's
-#depmod -a
-#Don't report the exitcode of depmod
-exit 0
+# Backup grub.conf
+#
+cp -vf /boot/grub/grub.conf /boot/grub/grub.conf.org
+#
+# Unpack the updated files
+#
+echo
+echo Unpack the updated files ...
+#
+tar xvf /opt/pakfire/tmp/files --preserve --numeric-owner -C / \
+	--no-overwrite-dir
+#
+# Modify grub.conf
+#
+echo
+echo Update grub configuration ...
+sed -i "s|ROOT|$ROOT|g" /boot/grub/grub.conf
+sed -i "s|KVER|$KVER|g" /boot/grub/grub.conf
+sed -i "s|MOUNT|$MOUNT|g" /boot/grub/grub.conf
+
+if [ "$(grep "^serial" /boot/grub/grub.conf.org)" == "" ]; then
+	echo "grub use default console ..."
+else
+	echo "grub use serial console ..."
+	sed -i -e "s|splashimage|#splashimage|g" /boot/grub/grub.conf
+	sed -i -e "s|#serial|serial|g" /boot/grub/grub.conf
+	sed -i -e "s|#terminal|terminal|g" /boot/grub/grub.conf
+	sed -i -e "s| panic=10 | console=ttyS0,38400n8 panic=10 |g" /boot/grub/grub.conf
+fi
+#
+# Made emergency - initramdisk
+#
+echo
+echo Create new Initramdisks ...
+cp -f /etc/mkinitcpio.conf.org /etc/mkinitcpio.conf
+sed -i "s| autodetect | |g" /etc/mkinitcpio.conf
+mkinitcpio -k $KVER-ipfire -g /boot/ipfirerd-$KVER-emergency.img
+cp -f /etc/mkinitcpio.conf.org /etc/mkinitcpio.conf
+#
+# Made initramdisk
+#
+if [ "${ROOT:0:7}" == "/dev/sd" ]; then
+    # Remove ide hook if root is on sda
+    sed -i "s| ide | |g" /etc/mkinitcpio.conf
+else
+if [ "${ROOT:0:7}" == "/dev/hd" ]; then
+    # Remove pata & sata hook if root is on hda
+    sed -i "s| pata | |g" /etc/mkinitcpio.conf
+    sed -i "s| sata | |g" /etc/mkinitcpio.conf
+fi
+fi
+mkinitcpio -k $KVER-ipfire -g /boot/ipfirerd-$KVER.img
+#
+# ReInstall grub
+#
+grub-install --no-floppy ${ROOT::`expr length $ROOT`-1} --recheck
+#
+# Rebuild Language
+#
+perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
+#
+# Delete old lm-sensor modullist...
+#
+rm -rf /etc/sysconfig/lm_sensors
+#
+# This core-update need a reboot
+/usr/bin/logger -p syslog.emerg -t core-upgrade-34 "Upgrade finished. If you use a customized grub.cfg"
+/usr/bin/logger -p syslog.emerg -t core-upgrade-34 "Check it before reboot !!!"
+/usr/bin/logger -p syslog.emerg -t core-upgrade-34 " *** Please reboot... *** "